Radiophotoluminescence phenomenon in copper-doped aluminoborosilicate glass

Radiophotoluminescence phenomena have been widely investigated on various types of materials for dosimetry applications. We report that an aluminoborosilicate glass containing 0.005 mol% copper exhibits intense photoluminescence in the visible region induced by X-ray and γ-ray irradiation. The luminescence is assigned to the 3d⁹4s¹ → 3d¹⁰ transition of Cu⁺. The proportionality of the intensity of the induced photoluminescence to the irradiation dose was confirmed up to 0.5 kGy using ⁶⁰Co γ-ray irradiation. Based on the spectroscopic results, a potential mechanism was proposed for the enhancement of the photoluminescence. The exposure to the ionizing radiation generates electron-hole pairs in the glass, and the electrons are subsequently captured by the Cu²⁺ ions, which are converted to Cu⁺ and emit the luminescence. For the glass containing 0.01 mol% copper, the pronounced enhancement of the photoluminescence was not observed because the reverse reaction, ie, the capture of the holes by the Cu⁺ ions, becomes prominent. The photoluminescence induced by the irradiation was stably observed for the glasses kept at room temperature and even for the glasses heat-treated at 150°C. However, the induced photoluminescence could be eliminated by the heat treatment at a temperature at 500°C, and the glass returned to the initial pre-irradiation state. The Cu-doped aluminoborosilicate glass is a potential candidate for use in dosimetry applications.     

New design of hybrid-type self-bearing motor for small, high-speed spindle

A new structure of hybrid (HB)-type self-bearing motor is proposed for miniature spindle motors. The proposed design combines the HB-type self-bearing motor and HB active magnetic bearing in the common stator and rotor pair to generate large radial forces. First, the principle and theoretical background are introduced. Then, the air gap flux is analyzed by the finite element method, and radial forces for the proposed and standard-type HB self-bearing motors are compared. Finally, experiments are conducted to confirm the performance of the proposed motor. The motor can run at relatively high rotating speed with relatively high torque compared with its small size. The levitation is very stable and the motor indicates good performance for practical application.     

Characterization of pigmented granules in minocycline-induced cutaneous pigmentation: observations using fluorescence microscopy and high-performance liquid chromatography

Ambiguous abdominal situs, asplenia/polysplenia and severe cardiac malformations characterize heterotaxy in humans. These anomalies result from the inability of the developing embryo to establish normal left-right asymmetry. We have studied an interesting family in which the heterotaxy phenotype segregates as an X-linked recessive trait. In order to map the heterotaxy locus (HTX), we have analysed 39 family members using highly-polymorphic microsatellite markers from the X chromosome. One of these markers, DXS994, shows no recombination with the disease locus in 20 informative meioses. Linkage analysis results in a maximum lod score of 6.37. Current genetic and physical mapping data assign the order of loci in Xq24-q27.1 as cen-DXS1001-(DXS994, HTX)-DXS984-tel. These results establish the first mapping assignment of situs abnormalities in humans.     

Anomalies of the tracheobronchial tree in patients with esophageal atresia

Bone marrow examination revealed a lipid-laden histiocytosis in seven patients undergoing long-term total parenteral nutrition necessitated by extensive short-bowel surgical resection. Clinical abnormalities occurred during this treatment which required bone marrow examination. These included hepatosplenomegaly and peripheral blood cytopenia; the median time to the detection of these abnormalities was 64 months. The most striking change within the bone marrow was the presence of many pigment-laden histiocytes which had the typical morphology of sea-blue histiocytes seen in the so-called idiopathic sea-blue histiocyte syndrome. The occurrence of sea-blue histiocytosis in the bone marrow in association with long-term parenteral nutrition for short-bowel syndrome has not, to our knowledge, been reported previously and should now be considered in the differential diagnosis of bone marrow sea-blue histiocytosis.     

一种独特和可靠的厚/薄铜复合PWB

本文论述一种厚/薄铜复合PWB(及其可靠性),它允许PWB设计者在厚铜和薄铜之间以任何希望的图形进行随意选择,以使电源模块/分配电路可以和精细图形特征一起集成,从而适应离I/O数半导体封装的要求。     

An on-chip active decoupling circuit to suppress crosstalk in deep-submicron CMOS mixed-signal SoCs

A decoupling circuit using an operational amplifier is proposed to suppress substrate crosstalk in mixed-signal system-on-chip (SoC) devices. It overcomes the parasitic inductance problem of on-chip capacitor decoupling. The effect of the proposed decoupling circuit is not limited by parasitic fine impedance. A 0.13-/spl mu/m CMOS test chip showed that substrate noise at frequencies from 40 MHz to 1 GHz was incrementally suppressed by sequentially activating three of the proposed circuits in parallel. The power dissipation of each circuit was 3.3 mW at a 1.0-V power supply. The test chip measurement showed that the proposed decoupling reduced crosstalk by 31% at 200 MHz, whereas it was reduced by 4.4% with capacitor decoupling. This 7:1 ratio, or 17 dB, corresponds to the gain of the opamp. Design of the opamp and its feedback loop for active decoupling is simple, making the opamp useful for SoC applications.     

Hardware system of the Earth Simulator

The Earth Simulator (ES), developed under the Japanese government’s initiative “Earth Simulator project”, is a highly parallel vector supercomputer system. In this paper, an overview of ES, its architectural features, hardware technology and the result of performance evaluation are described.

In May 2002, the ES was acknowledged to be the most powerful computer in the world: 35.86 teraflop/s for the LINPACK HPC benchmark and 26.58 teraflop/s for an atmospheric general circulation code (AFES). Such a remarkable performance may be attributed to the following three architectural features; vector processor, shared-memory and high-bandwidth non-blocking interconnection crossbar network.

The ES consists of 640 processor nodes (PN) and an interconnection network (IN), which are housed in 320 PN cabinets and 65 IN cabinets. The ES is installed in a specially designed building, 65 m long, 50 m wide and 17 m high. In order to accomplish this advanced system, many kinds of hardware technologies have been developed, such as a high-density and high-frequency LSI, a high-frequency signal transmission, a high-density packaging, and a high-efficiency cooling and power supply system with low noise so as to reduce whole volume of the ES and total power consumption.

For highly parallel processing, a special synchronization means connecting all nodes, Global Barrier Counter (GBC), has been introduced.     

Response of inertinites from some Australian coals to non-catalytic hydrogenation in tetralin

Inertinite concentrates from three Australian bituminous coals were hydrogenated at various temperatures ranging from 350 to 475 °C in the presence of tetralin without any added catalyst. Both conversion yields and microscopic observations of the benzene-extracted hydrogenation residues have revealed that the hydrogenation of the inertinite macerals becomes significant only > 400 °C, whereas the dissolution-hydrogenation of the accompanying vitrinite macerals occurs mainly between 350 and 400 °C. The major reaction pathway for the inertinite particles in the hydrogenation process appears to be one of initial mild carbonization followed by hydrogenation. A simplified reaction scheme is proposed which describes the reaction pathway involved in the hydrogenation of inertinite.     

Magnetic resonance imaging study on the results of surgery for cervical compression myelopathy

The morphologic changes and signal intensity of the spinal cord on preoperative magnetic resonance images were correlated with postoperative outcomes in 74 patients undergoing decompressive cervical surgery for compressive myelopathy. The transverse area of the spinal cord on T1-weighted images at the level of maximum compression was closely correlated with the severity of myelopathy, duration of disease, and recovery rate as determined by the Japanese Orthopaedic Association score. In patients with ossification of the posterior longitudinal ligament or cervical spondylotic myelopathy, the increased intramedullary T2-weighted magnetic resonance imaging signal at the site of maximal cord compression and duration of disease significantly influenced the rate of recovery. A multiple regression equation was then developed with these three variables to predict surgical outcomes.