High thermal stable thermoplastic-thermosetting polyimide film by use of asymmetric dianhydride (a-BPDA)

In order to obtain thermoplastic (before curing) and thermosetting (after curing) polyimides with high T_g for adhesive film, we prepared novel polyimides having phenylethynyl group in the side chain (44% of concentration of curing group) from asymmetric 2,3,3′,4′-biphenyltetracarboxylic dianhydride (a-BPDA), 3,4′-oxydianiline (3,4′-ODA) or 1,3-bis(4-aminophenoxy)benzene (1,3,4-APB) or 1,3-bis(3-aminophenoxy)benzene (1,3,3-APB), and 2,4-diamino-1-(4-phenylethynylphenoxy)benzene (mPDAp). Among three kinds of polymer, uncured polyimide of a-BPDA/1,3,4-APB; mPDAp had rather high T_g (265 °C, DMA) and thermoplasticity (E′ drop>10³ at T_g). After curing reaction of phenylethynyl group, the T_g of the polyimide was increased dramatically (364 °C, DMA). The polyimide derived from 1,3,4-APB having less concentration of curing group (20%) was also prepared to improve further film flexibility and toughness.     

Three-dimensional medical image recognition of cancer of the liver by a revised radial basis function (RBF) neural network algorithm

In this study, we propose a revised radial basis function (RBF) neural network algorithm and apply this algorithm to computer-aided diagnosis (CAD) of the liver. First, the revised RBF neural network algorithm is applied to recognition of the liver regions, and the recognition results are compared with those obtained using the conventional RBF neural network and the conventional multilayered neural network trained using the back-propagation algorithm. It is shown that the revised RBF neural network is accurate, and is a useful method because the parameters are automatically determined. Then, the revised RBF neural network is applied to CAD of the liver cancer called hepatocellular carcinoma (HCC).     

Tetra-Repeat Microsatellite Markers for the Masu Salmon (Oncorhynchus masou masou) and Its Application in Cross-Subspecies Amplification

We developed tetranucleotide-repeat microsatellite markers for the masu salmon (Oncorhynchus masou) complex. 454 pyrosequencing was used to discover repeat motifs, and seven polymorphic microsatellite-primer sets were identified. The number of alleles detected at each locus ranged from four to 24 and the expected heterozygosity varied from 0.57 to 0.92. Cross-subspecies amplification for O. m. masou, O. m. ishikawae and O. m. subsp. was successful. These microsatellites can be utilized in studies of genetic structure, genetic diversity, and intra- and inter-subspecific hybridization, making a contribution to conservation and management of the Oncorhynchus masou complex.     

Gas Transport Parameters for Compacted Reddish-Brown Soil in Sri Lankan Landfill Final Cover

Gas exchange through the compacted final cover soil at landfill sites plays a vital role for emission, fate, and transport of toxic landfill gases. This study involved measuring the soil-gas diffusivity (Dp/Do, the ratio of gas diffusion coefficients in soil and free air) and air permeability (ka) for differently compacted soil samples (reddish-brown soil) from the final cover at the Maharagama landfill in Sri Lanka. The samples were prepared by either standard Proctor compaction or hand compaction to dry bulk densities of 1.60–1.94??g?cm-3. Existing and modified models for predicting Dp/Do and ka were tested against the measured data. The simple, single-parameter Buckingham model predicted measured Dp/Do values across compaction levels equally well or better than a dry bulk density (DBD) dependent model and a soil-water retention (SWR) dependent model. The measured ka values for differently compacted samples were highly affected by the compaction level and the sample moisture preparation method. Also, for air permeability, a single-parameter Buckingham-type ka model was most accurate in predicting ka in the differently compacted soil samples. Equivalent air-filled pore diameters (the effective diameter of the drained pores active in leading air through the sample) for gas flow, deq, were calculated from the measured Dp/D0 and ka values. The deq increased with compaction level, suggesting that a very high compaction level creates well-connected macropores in the reduced total pore space of the cover soil. This is an important consideration when designing cover soils for optimally low water and high oxygen exchange while minimizing climate and toxic gas emissions from the waste layer to the atmosphere.     

A distributed routing method for AGVs under motion delay disturbance

In real transportation environments for semi-conductor manufacturing, unexpected disturbances such as motion delays and/or sudden requests for transportation may cause collisions among AGVs increasing total transportation time. It is required to generate a collision-free routing for multiple automated guided vehicles (AGVs) within a few seconds. In this paper, we propose a distributed routing method under motion delay disturbance for multiple AGVs. The proposed method features a characteristic that each AGV subsystem derives its optimal route to minimize the sum of the transportation time and the penalties with respect to collision probability with other AGVs. The penalties reflect the collision probability distribution function for motion delay disturbances. The proposed method is applied to a routing problem for transportation in the semiconductor fabrication bay with 143 nodes and 20 AGVs. The computational results show that the total transportation time obtained by the proposed method is shorter than that of the conventional method. For dynamic transportation environments, an optimal timing for re-routing multiple AGVs under motion delay disturbance is systematically determined by the tradeoff relationship between the total computation time to derive a solution and the uncertainties for re-routings. Markov chain is used to represent uncertainty distribution for re-routings. The proposed method is implemented in an experimental transportation system with 51 nodes and 5 AGVs. The experimental results demonstrate that the proposed method is applicable to real transportation environments.     

Supercritical CO2 extraction of pigment components with pharmaceutical importance from Chlorella vulgaris

BACKGROUND: Chlorella vulgaris is a green microalgae that contains various pigment components of carotenoids and chlorophylls. Supercritical CO₂ is widely used for extraction of pharmaceutical compounds because it is non‐oxic and easily separated from extracted material by simply depressurizing. In this work, pharmaceutical compounds from Chlorella vulgaris have been extracted using supercritical CO₂ with or without entrainer at various extraction conditions. RESULTS: Based on high performance liquid chromatography (HPLC) analysis, the extracts contained pigment components, such as lutein, β‐carotene, chlorophyll a and b. Higher extraction pressure and temperature promoted higher lutein extraction by supercritical CO₂. The optimum pressure and temperature for extraction were obtained as 50 MPa and 80 °C. Ethanol as an entrainer was more effective than acetone for the extraction of pigment components. Pigment components in the extract obtained by supercritical CO₂ with and without entrainer were compared with the extract obtained by a conventional extraction method. CONCLUSION: Supercritical CO₂ has been successfully applied for the extraction of pigment components from Chlorella vulgaris. Supercritical CO₂ enabled high selectivity for lutein extraction; however, the lutein yield was lower than that obtained by extraction using supercritical CO₂ with ethanol and soxhlet. Copyright © 2008 Society of Chemical Industry     

Comparison of the surface changes on cathode during long term storage testing of high energy density cylindrical lithium-ion cells

Nickel-based oxide cathode material taking out from lithium-ion cell after storage for 2 years at 45 °C is analyzed by electron energy-loss spectroscopy in a scanning transmission electron microscope (STEM-EELS) and the result of STEM-EELS is compared with cobalt-based oxide cathode material which is treated as same manor as nickel-based oxide cathode material. The Ni-L_2,3 energy-loss near-edge structure (ELNES) spectra of nickel-based oxide cathode material show peak positions similar to original material before storage. This result indicates that nickel-based oxide material has no significant change in the surface structure. On the other hand, a remarkable shift to low energy is observed in the Co-L_2,3 ELNES spectra of the cobalt-based oxide cathode material after storage. The cycle test at 60 °C under the conditions of aggressive driving cycle (US06) mode for the nickel-based oxide cathode/graphite cell is also carried out. It is clear that cycle performance of the nickel-based oxide cathode/graphite cell is dependent on the depth of discharge (DOD).