10 Gbit/s optical soliton transmission over 7200 km by using amonolithically integrated MQW-DFB-LD/MQW-EA modulator light source

The authors demonstrate 10 Gbit/s optical soliton transmission in a recirculating loop through the use of a monolithically integrated MQW-DFB-LD/MQW-EA modulator light source. The timing jitter due to the Gordon-Haus effect is successfully reduced by the optical bandpass filters conventionally used in the cascaded EDFAs to avoid the accumulation of amplified spontaneous emission. The transmission distance of 7200 km is achieved at a bit error rate of 10^-9     

A cavity-backed rectangular aperture antenna with application to a tilted fan beam array antenna

A rectangular aperture of A/sub x//spl times/A/sub y/, cut in the top conducting plate of a triplate transmission line and backed by a cavity, radiates a tilted beam off the direction normal to the aperture. The mechanism of the radiation is explained using the Poynting vector distribution above the aperture and the phase distribution of the electric field over the aperture. The tilt angle is calculated as a function of side length A/sub x/ for a representative value of A/sub y/=18 mm=0.747/spl lambda//sub 12.45/, where /spl lambda//sub 12.45/ is the wavelength at a test frequency of 12.45 GHz. A tilted beam of approximately 27/spl deg/ is realized at A/sub x//A/sub y/=8/9 with a gain of approximately 8 dB. Using this value of A/sub x//A/sub y/, an array antenna composed of rectangular cavity-backed aperture elements is investigated. The array forms a tilted fan beam without phase shifters. The frequency responses of the gain and input impedance are discussed.     

Hydrodynamic interaction and coalescence of two droplets under large step shear strains

We observed change in distance between two droplets in each step after application of large multi-step shear strains. Experiments were performed using a sliding plate apparatus. Large step shear strains were applied to two polyisobutylene droplets in poly(dimethyl siloxane) matrix in the same plane between the plates. The distance between the two droplets decreases with increasing the total shear strain, which is given by the product of the step strain magnitude and the number of application of the step strains. The two droplets coalesce when the distance becomes less than the diameter of the droplets. The slope for plots of the distance versus the total strain is independent of the step strain magnitude. This indicates that the effect per unit strain on the distance is the same, irrespective of the strain magnitude. It is suggested that a stronger hydrodynamic interaction between the droplets is the main cause for the droplet approach.     

Clinicopathological significance of intratubular giant macrophages in progressive glomerulonephritis

Very large macrophages, which we have termed "giant macrophages" (G-M phi), have been found in renal tubules, some containing cytoplasmic vacuoles. To elucidate their pathophysiological roles, we examined renal biopsy tissues from various primary glomerulonephritis (GN) and tubulointerstitial nephritis (TIN) using immunohistochemistry with monoclonal antibodies against M phi and other cell surface markers. Giant macrophages were absent or rare in TIN, minimal change nephrotic syndrome, and minor glomerular abnormalities, but G-M phi was plentiful in progressive glomerulonephrides such as IgA nephropathy with crescents, membranoproliferative GN, focal segmental glomerulosclerosis, and especially in crescentic GN. These G-M phi were usually seen in the lumen of renal tubules, but occasionally were found in the Bowman's spaces and glomerular tufts, and similar cells were also found in urine. Moreover, they frequently made contact with tubular epithelial cells expressing intercellular adhesion molecule-1, and the tubular epithelial cells in such lesions often had degenerative changes. Giant M phi may damage tubular epithelial cells from the luminal side. Phenotypically, G-M phi showed activated (CD71+) and mature (25F9+) characteristics along with features of M phi (CD68+), and the cytoplasm contained a great deal of lipids. The numbers of G-M phi in renal tissues closely correlated with the degree of hematuria (rho = 0.5, P < 0.001), serum creatinine value (r = 0.63, P < 0.001) in GN patients (N = 96) and with proteinuria in IgA nephropathy patients (r = 0.89, P < 0.001, N = 27). These data suggest that G-M phi are M phi that were activated and matured in certain active inflammatory sites, which flowed into tubules and then into urine. Thus, the existence of G-M phi in biopsy tissue or urine reflect the activity of GN and may have a predictive value for the progression of GN.     

An adaptive associative memory system based on autonomous reaction between image memories

To construct a “thinking-like” processing system, a new architecture of an adaptive associative memory system is proposed. This memory system treats “images” as basic units of information, and adapts to the environment of the external world by means of autonomous reactions between the images. The images do not have to be clear, distinct symbols or patterns; they can be ambiguous, indistinct symbols or patterns as well. This memory system is a kind of neural network made up of nodes and links called a localist spreading activation network. Each node holds one image in a localist manner. Images in high-activity nodes interact autonomously and generate new images and links. By this reaction between images, various forms of images are generated automatically under constraints of links with adjacent nodes. In this system, three simple image reaction operations are defined. Each operation generates a new image by combining pseudofigures or features and links of two images. This work was presented, in part, at the Fourth International Symposium on Artificial Life and Robotics, Oita, Japan, January 19–22, 1999     

Polyphenols Extracted from Black Tea (Camellia sinensis) Residue by Hot‐Compressed Water and Their Inhibitory Effect on Pancreatic Lipase in vitro

Abstract: Polyphenols, retained in black tea wastes following the commercial production of tea beverages, represent an underutilized resource. The purpose of this study was to investigate the potential use of hot‐compressed water (HCW) for the extraction of pancreatic lipase‐inhibiting polyphenols from black tea residues. Black tea residues were treated with HCW at 10 °C intervals, from 100 to 200 °C. The resulting extracts were analyzed using high‐performance liquid chromatography‐mass spectrometry and assayed to determine their inhibitory effect on pancreatic lipase activity in vitro. Four theaflavins (TF), 5 catechins, 2 quercetin glycosides, quinic acid, gallic acid, and caffeine were identified. The total polyphenol content of extracts increased with increasing temperature but lipase inhibitors (TF, theaflavin 3‐O‐gallate, theaflavin 3′‐O‐gallate, theaflavin 3,3′‐O‐gallate, epigallocatechin gallate, and epicatechin gallate) decreased over 150 °C. All extracts inhibited pancreatic lipase but extracts obtained at 100 to 140 °C showed the greatest lipase inhibition (IC₅₀s of 0.9 to 1.3 μg/mL), consistent with the optimal extraction of TFs and catechins except catechin by HCW between 130 and 150 °C. HCW can be used to extract pancreatic lipase‐inhibiting polyphenols from black tea waste. These extracts have potential uses, as dietary supplements and medications, for the prevention and treatment of obesity. Practical Application: Active forms of lipase inhibitors can be recovered from black tea residues. They could be used as dietary supplements or medications.     

两层底框砖房商住楼抗震和经济性能的综合评估研究

根据 4栋已建两层底框抗震墙砖房的设计资料及施工图 ,设计出了相应的普通纯框架结构房屋 ;对两者的经济性能作了定量评价。对位于地震设防烈度为 6 ,7度区的 3幢底框砖房综合楼与相应的框架结构 ,建立计算模型 ,输入 5条地震波 ,进行了罕遇地震作用下的弹塑性时程分析。在对比分析的基础上 ,对两种不同结构体系的抗震性能和经济指标做出了综合评估。     

高温后花岗岩力学性能的试验研究

对经历不同高温后花岗岩的力学性能进行了试验研究，分析了花岗岩应力．应变曲线、峰值应力、峰值应变、弹性模量和泊松比等的变化情况。研究结果表明，经历400℃以内的高温后，温度对花岗岩的力学性能的影响不明显。但经历的温度超过400℃后，随受热温度升高花岗岩力学性能迅速劣化，花岗岩峰值应力(或强度)和弹性模量急剧降低，而峰值应变迅速增长。高温后花岗岩泊松比随经历高温的增加而呈减少趋势。     

Thermoreversible behavior of κ-carrageenan and its apatite-forming ability in simulated body fluid

Osteoconductive materials with self-setting ability have received much attention because their properties allow developing injectable materials for bone defects. Thermosensitive hydrogel with ability of bone-like apatite formation in a body environment is a candidate of injectable bone fillers with osteoconductivity because the apatite formation on materials is an essential to show osteoconduction. The present study focused on the development of a thermosensitive hydrogel through modifications of the sulphonic groups of the polysaccharide, κ-carrageenan, with potassium chloride (KCl) and calcium chloride (CaCl₂). We found that the gelation temperature of κ-carrageenan solutions increased with increasing amounts of K⁺ ions. Apatite formation was observed on the gel after exposure to simulated body fluid for 0.5 day when the gel was prepared with a molar ratio of Ca²⁺/sulfonic groups = 1.5. These results indicate that a thermosensitive κ-carrageenan hydrogel with apatite-forming ability was obtained through the incorporation of K⁺ and Ca²⁺ ions into the solution.