Development of nano indium tin oxide (ITO) grains by alkaline hydrolysis of In(III) and Sn(IV) salts

Indium tin oxide (ITO) nano powders of different compositions (In: Sn = 90: 10, 70: 30 and 50: 50) were prepared by heat treatment (300-450°C) of mixed hydroxides of In(III) and Sn(IV). The hydroxides were obtained by the reaction of aq. NH₃ with mixed aq. solutions of In(NO₃)₃ and SnCl₄. FTIR and TG/DTA studies revealed that powders existed as In(OH)₃H₂O—SnO₃H₂H₂O in the solid state and then they transformed to In₂O₃—SnO₂ via some metastable intermediates after 300°C. Cubic phase of In₂O₃ was identified by XRD for the oxides up to 30% of Sn. Particle size measurements of the solid dispersed in acetone and SEM study for microstructure showed that the oxides were in the nano range (55-75 nm) whereas the size range determined from Debye-Scherrer equation were 11–24 nm.     

Organic‐acid‐catalyzed sol–gel route for preparing poly(methyl methacrylate)–silica hybrid materials

In this study, a series of organic–inorganic hybrid sol–gel materials consisting of a poly(methyl methacrylate) (PMMA) matrix and dispersed silica (SiO₂) particles were successfully prepared through an organic‐acid‐catalyzed sol–gel route with N‐methyl‐2‐pyrrolidone as the mixing solvent. The as‐synthesized PMMA–SiO₂ nanocomposites were subsequently characterized with Fourier transform infrared spectroscopy and transmission electron microscopy. The solid phase of organic camphor sulfonic acid was employed to catalyze the hydrolysis and condensation (i.e., sol–gel reactions) of tetraethyl orthosilicate in the PMMA matrix. The formation of the hybrid membranes was beneficial for the physical properties at low SiO₂ loadings, especially for enhanced mechanical strength and gas barrier properties, in comparison with the neat PMMA. The effects of material composition on the thermal stability, thermal conductivity, mechanical strength, molecular permeability, optical clarity, and surface morphology of the as‐prepared hybrid PMMA–SiO₂ nanocomposites in the form of membranes were investigated with thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, gas permeability analysis, ultraviolet–visible transmission spectroscopy, and atomic force microscopy, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Mesoporous titanium dioxide nanocatalyst: a recyclable approach for one‐pot synthesis of 5‐hydroxymethylfurfural

The present study deals with the production of 5‐hydroxymethyl furfural (HMF) from fructose by chemo‐conversion method using chemical catalyst, conventionally achieved by microwave‐assisted dehydration process. Five different chemical catalysts, namely oxalic acid, phosphotungstic acid and mesoporous titanium dioxide nanoparticles (TNPs) were compared at constant conditions of which TNPs yielded a maxima of 33.95%. The optimum temperature and catalyst loading were found to be 200°C and 20%, respectively, at a 5% optimum substrate concentration during 15 min optimum reaction time to yield 61.53% HMF. The efficiency of synthesised TNPs was investigated further through reusability studies. TNPs were properly recycled and the catalytic activity recovery was good even after a 14 batch reactions. The specific surface area of the TNP obtained is about 105.46 m² /g and its pore‐volume is about 0.42 cm³ /g according to single point adsorption. A large accessible surface area combined with a minimal pore size (15.92 nm) obtained with mesoporous TNPs is desirable for better catalyst loading, high‐yield HMF, retention and reduced diffusion constraints.Inspec keywords: mesoporous materials, recycling, production management, dissociation, nanoparticles, nanotechnologyOther keywords: mesoporous titanium dioxide nanocatalyst, recyclable approach, one‐pot synthesis, 5‐hydroxymethyl furfural production, HMF, chemo‐conversion method, chemical catalyst, microwave‐assisted dehydration process, oxalic acid, phosphotungstic acid, mesoporous titanium dioxide nanoparticles, TNP     

Self-nanoemulsifying drug delivery system of docosahexanoic acid: development,in vitro,in vivo characterization

Context: Docosahexanoic acid (DHA) is an essential omega-3 fatty acid for normal brain development and its use has increased considerably in recent years.

Objective: The aim of this study is to develop and evaluate self-nanoemulsifying drug delivery systems (SNEDDS) of DHA for improved palatability, dispersibility and bioavailability.

Methods: The SNEDDS were prepared and evaluated for miscibility, employing different combinations of olive oil and soyabean oil as oil phase, Span 80, Span 20, soya phosphatidylcholine, Labrafil M 1944 CS as surfactants while Tween 80, PEG 400, Cremophor RH40 and propylene glycol as cosurfactants. Thermodynamically stable SNEDDS were characterized for dispersibility, self-emulsification time, droplet size, zeta potential along with sensory analysis. The optimized formulation was subjected to ex vivo and in vivo evaluation such as intestinal permeability, memory performance test, brain concentration and histopathology studies.

Results: The optimized SNEDDS formulation showed emulsification time of 27?±?4.7?s with droplet size of 17.6?±?3.5?nm and zeta potential of??37.6?±?0.5?mV. Intestinal absorption study depicted 18.3%, 21.5%, 41.5%, 98.7% absorption of DHA with SNEDDS-based formulation in comparison to 8.2%, 15.1%, 28.8%, 46.1% absorption of DHA with oil-based marketed formulation after 0.5, 1, 2 and 4?h. DHA concentration in brain homogenate was found to be increased to 2.6-fold in comparison to DHA-marketed formulation. This could be ascribed to enhanced dispersibility and bioavailability of DHA from nanosized formulation.

Conclusion: The developed formulation led to enhanced dispersibility and bioavailability of DHA due to the formation of nanodroplets.     

Influence of pH on particle size and sensing response of chemically synthesized chromium oxide nanoparticles to alcohols

Nanoparticles of chromium oxide have been synthesized by following a co-precipitation route at various pH values of the precursor solution. Structural and morphological analysis were carried out by using XRD and TEM techniques which revealed that the size of nanoparticles synthesized at pH 9 was smaller as compared to those synthesized at other pH values. The thick films of synthesized samples were deposited on alumina substrate and their sensing response to methanol, ethanol and isopropanol was investigated at different operating temperatures. It was observed that all the sensors gave optimum response at 250 °C. It has been observed that sample prepared at pH 9, being a collection of smallest particles as compared to other samples, exhibited high sensing response to alcohol vapour. Sensor response of all the samples tested was significantly higher towards isopropanol vapour than towards methanol or ethanol.In the present study the effect of particle size on intergranular activation energy has been studied as well. It was found that smaller particles possess high activation energy and exhibit higher sensing response as compared to that of larger particles. This type of study may help in the selection of particle suitable for gas sensing.     

Lévy flight artificial bee colony algorithm

Artificial bee colony (ABC) optimisation algorithm is a relatively simple and recent population-based probabilistic approach for global optimisation. The solution search equation of ABC is significantly influenced by a random quantity which helps in exploration at the cost of exploitation of the search space. In the ABC, there is a high chance to skip the true solution due to its large step sizes. In order to balance between diversity and convergence in the ABC, a Lévy flight inspired search strategy is proposed and integrated with ABC. The proposed strategy is named as Lévy Flight ABC (LFABC) has both the local and global search capability simultaneously and can be achieved by tuning the Lévy flight parameters and thus automatically tuning the step sizes. In the LFABC, new solutions are generated around the best solution and it helps to enhance the exploitation capability of ABC. Furthermore, to improve the exploration capability, the numbers of scout bees are increased. The experiments on 20 test problems of different complexities and five real-world engineering optimisation problems show that the proposed strategy outperforms the basic ABC and recent variants of ABC, namely, Gbest-guided ABC, best-so-far ABC and modified ABC in most of the experiments.     

SUSANS With Polarized Neutrons

Super Ultra-Small Angle Neutron Scattering (SUSANS) studies over wave vector transfers of 10^–4 nm^–1 to 10^–3 nm^–1 afford information on micrometer-size agglomerates in samples. Using a right-angled magnetic air prism, we have achieved a separation of ≈10 arcsec between ≈2 arcsec wide up- and down-spin peaks of 0.54 nm neutrons. The SUSANS instrument has thus been equipped with the polarized neutron option. The samples are placed in a uniform vertical field of 8.8 × 10⁴ A/m (1.1 kOe). Several magnetic alloy ribbon samples broaden the up-spin neutron peak significantly over the ±1.3 × 10^–3 nm^–1 range, while leaving the down-spin peak essentially unaltered. Fourier transforms of these SUSANS spectra corrected for the instrument resolution, yield micrometer-range pair distribution functions for up- and down-spin neutrons as well as the nuclear and magnetic scattering length density distributions in the samples.     

Virtual Organizations in Arigatoni

Arigatoni is a lightweight overlay network that deploys the Global Computing Paradigm over the Internet. Communication for over the behavioral units of the overlay is performed by a simple resource discovery protocol (RDP). Basic Global Computers Units (GC) can communicate by first registering to a brokering service and then by mutually asking and offering services.Colonies and communities are the main entities in the model. A colony is a simple virtual organization composed by exactly one leader and some set (possibly empty) of individuals. A community is a raw set of colonies and global computers (think it as a soup of colonies and global computer without a leader).We present an operational semantics via a labeled transition system, that describes the main operations necessary in the Arigatoni model to perform leader negotiation, joining/leaving a colony, linking two colonies and moving one GC from one colony to another. Our formalization results to be adequate w.r.t. the algorithm performing peer logging/delogging and colony aggregation.     

Enhancement in ethanol sensing response by surface activation of ZnO with SnO2

A surface functionalized gas sensing material convincingly giving enhanced response to ethanol is demonstrated by SnO₂ activated ZnO. Zinc oxide was synthesized by a chemical route, deposited on an alumina substrate and activated by tin dioxide obtained by on-site oxidation of tin chloride. The XRD study of samples confirmed wurtzite hexagonal structure of zinc oxide and FESEM investigation revealed that surface of activated ZnO microrods was covered by nanoparticles of tin dioxide. Sensing response of sensing elements activated with different concentrations of tin chloride solution has been investigated. It was found that response to ethanol vapor significantly enhanced (eight times) by surface activation with tin dioxide, which optimized at a concentration of 3 wt.%.