Size effect on creep energy dissipation during stable crack growth

Creep energy dissipation (CED) due to crack tip creep zone is determined under steady state conditions for centre cracked thin specimen of 1.25CrO.5Mo steel, with different widths and crack length to width ratios. The creep energy rate increases when the increment in crack length Δa increases and the slope increases with increase in aspect ratio a/W and decreases with increase in width W.     

Selenium-mediated differential response of beta-glucosidase and beta-galactosidase of germinating Trigonella foenum-graecum

Beta-glucosidase and beta-galactosidase activity profile tested in different seeds during 24 h germination revealed reasonably high levels of activity in Vigna radiata, Cicer arietinum, and Trigonella foenum-graecum. In all seeds tested, beta-galactosidase activity was, in general, higher than that of beta-glucosidase. T. foenum-graecum seedlings exhibited maximal total and specific activities for both the enzymes during 72 h germination. Se supplementation as Na2SeO3 up to 0.75 ppm was found to be beneficial to growth and revealed selective enhancement of beta-galactosidase activity by 40% at 0.5 ppm Se. The activities of both the enzymes drastically decreased at 1.0 ppm level of Se supplementation. On the contrary, addition of Na2SeO3 in vitro up to 1 ppm to the enzyme extracts did not influence these activities. Hydrolytic rates of beta-glucosidase in both control and Se-supplemented groups were enhanced by 20% with 0.05 M glycerol in the medium and 30% at 0.1 M glycerol. The rates were marginally higher in Se-supplemented seedlings than the controls, irrespective of added glycerol in the medium. In contrast, hydrolysis by beta-galactosidase showed a trend of decrease in Se-supplemented seedlings compared to the control, when glycerol was present in the medium. Addition of Se in vitro in the assay medium showed no difference in the hydrolytic rate by beta-galactosidase when compared to control, while the activity of beta-glucosidase declined by 50%. Se-grown seedlings showed an enhancement of transglucosidation rate by 40% in the presence of 0.1 M glycerol. The study reveals a differential response to Se among the beta-galactosidase and beta-glucosidase of T. foenum-graecum with increase in the levels of beta-galactosidase activity.     

良好FPGA信号完整性的实现方法

简介 信号完整性是高速系统设计的关键因素.较差的信号完整性会导致工程成本增加,延缓产品发布,降低产品收益.在当今要求产品能够及时面市的半导体市场上,忽略信号完整性可能会造成高达几百万美元的代价.高速系统中如何保持信号完整性无疑取决于对FPGA的选型.     

Unital Design Based Location Service for Subterranean Network Using Long Range Topology

Wireless Personal Communications - Wireless Underground Networks comprise the ability to constantly monitor several physical parameters such as ground temperature, water level and soil condition,...     

Study of Circular Complementary Split Ring Resonator on a Heterogeneous Substrate Material

Wireless Personal Communications - A circular patch loaded with a circular complementary split ring resonator (CSRR) is fabricated on a heterogeneous substrate material. The CSRR helps to reduce...     

Influence of Zn2+ doping on the morphotropic phase boundary in lead-free piezoelectric (1 – x)Na1/2Bi1/2TiO3-xBaTiO3

A series of morphotropic phase boundary (MPB) compositions of (1–x)Na_1/2Bi_1/2TiO₃-xBaTiO₃ (x = 0.05, 0.055, 0.06, 0.065, 0.07), with and without 0.5 mol% Zn-doping was synthesized using the solid-state route. The samples were characterized using X-ray diffraction, dielectric analysis, and electromechanical measurements (piezoelectric d₃₃ coefficient, coupling factor k_p, mechanical quality factor Q_m, and internal bias field E_bias). The increase in the ferroelectric-relaxor transition temperature upon Zn-doping was accompanied by a shift of the MPB toward the Na_1/2Bi_1/2TiO₃-rich side of the phase diagram. Higher tetragonal phase fraction and increased tetragonal distortion were noted for Zn-doped (1 – x)Na_1/2Bi_1/2TiO₃-xBaTiO₃. In addition, ferroelectric hardening and the presence of an internal bias field (E_bias) were observed for all doped compositions. The piezoelectric constant d₃₃ and the coupling coefficient k_p decreased by up to ∼30%, while a 4- to 6-fold increase in Q_m was observed for the doped compositions. Apart from establishing a structure–property correlation, these results highlight the chemically induced shift of the phase diagram upon doping, which is a crucial factor in material selection for optimal performance and commercialization.     

Large electrocaloric effect with ultrawide temperature span in Na1/2Bi1/2TiO3-based lead-free ceramics

Innovative cooling technologies are recognized by many industries as a crucial part of their system design. A large electrocaloric effect (ECE) and extended working temperature are the key issues hindering the realization of electrocaloric refrigeration technology. In this work, large ECE (ΔT = 0.8–0.9°C @ 4 kV/mm) with an ultrawide temperature span from 30 to 120°C is noted for lead-free (Na_1/2Bi_1/2)_0.80Sr_0.20(Zn_1/3Nb_2/3)_xTi_1-xO₃ ceramics. The excellent ECE performance can be ascribed to the evolution of polar nanoregions. Our work suggests that this material is promising for applications in solid-state refrigeration systems with a broad range of operating temperatures.     

Thermal depolarization and electromechanical hardening in Zn2+-doped Na1/2Bi1/2TiO3-BaTiO3

Na_1/2Bi_1/2TiO₃-based materials have been earmarked for one of the first large-volume applications of lead-free piezoceramics in high-power ultrasonics. Zn²⁺-doping is demonstrated as a viable route to enhance the thermal depolarization temperature and electromechanically harden (1-y)Na_1/2Bi_1/2TiO₃-yBaTiO₃ (NBT100yBT) with a maximum achievable operating temperature of 150 °C and mechanical quality factor of 627 for 1 mole % Zn²⁺-doped NBT6BT. Although quenching from sintering temperatures has been recently touted to enhance T_F-R, with quenching the doped compositions featuring an additional increase in T_F-R by 17 °C, it exhibits negligible effect on the electromechanical properties. The effect is rationalized considering the missing influence on conductivity and therefore, negligible changes in the defect chemistry upon quenching. High-resolution diffraction indicates that Zn²⁺-doped samples favor the tetragonal phase with enhanced lattice distortion, further corroborated by ²³Na Nuclear Magnetic Resonance investigations.     

Wavelet analysis for classification of multi-source PD patterns

Multi-resolution signal decomposition (MSD) technique of wavelet transforms has interesting properties of capturing the embedded horizontal, vertical and diagonal variations within an image in a separable form. This feature was exploited to identify individual partial discharge (PD) sources present in multi-source PD patterns, usually encountered during practical PD measurements. Employing the Daubechies wavelet, features were extracted from the third level decomposed and reconstructed horizontal and vertical component images. These features were found to contain the necessary discriminating information corresponding to the individual PD sources. Suitability of these extracted features for classification was further verified using a radial basis function neural network (NN). Successful recognition was achieved, even when the constituent sources produced partially and fully overlapping patterns, thus demonstrating the applicability of the proposed novel approach for the task of multi-source PD classification