Mechanisms of orientational and photoelastic birefringence generation of methacrylates for the design of zero–zero‐birefringence polymers

The intrinsic birefringence Δn⁰ and photoelastic coefficient C of poly(methyl methacrylate), poly(2,2,2‐trifluroethyl methacrylate), poly(phenyl methacrylate), and poly(2,2,3,3,3‐pentafluorophenyl methacrylate) were determined. We categorized these methacrylate polymers into four birefringence‐types, even though their molecular structures differed only by the substituents on the side chains. Based on the results of Δn⁰ and C, novel polymers that exhibit neither orientational nor photoelastic birefringence, i.e., zero–zero‐birefringence polymers, were designed and synthesized by quaternary copolymerization system. Furthermore, we confirmed that the mechanisms of orientational birefringence and photoelastic birefringence generation were different in these methacrylate polymers. The conformation of the repeat unit of the polymers was nearly constant during the generation of orientational birefringence. In contrast, the conformation of the repeat unit of the polymers changed during the generation of photoelastic birefringence in the glassy state. These findings demonstrated the reasonability of evaluating orientational and photoelastic birefringence separately, as well as the adequacy of the classification of polymers into four birefringence‐types. Given these results and the fact that zero–zero‐birefringence polymers could be prepared successfully by four‐birefringence type monomers, we demonstrated the reasonability of the method for designing the zero–zero‐birefringence polymers. POLYM. ENG. SCI., 55:1330–1338, 2015. © 2015 Society of Plastics Engineers     

Aging response of the young’s modulus and mechanical properties of Ti-29Nb-13Ta-4.6Zr for biomedical applications

Alloys for implant devices require improved strength but a reduced Young’s modulus, in order to become mechanically more compatible with adjacent bone tissues. In this study, a new metastable β-type titanium alloy, Ti-29Nb-13Ta-4.6Zr (wt pct), was subjected to aging treatment to produce different microstructures, and the resulting mechanical properties, including the Young’s modulus, were measured. The Young’s modulus of this alloy is found to be sensitive to microstructures generated by various heat treatments. For microstructures varying from (α + β) to (α + β + ω) and (β + ω), the Young’s modulus increases with an accompanying increase in tensile strength and hardness, but decreases in ductility. The (β + ω) microstructure has a low strength, high modulus, and poor ductility and cannot be used for biomedical applications. For an (α + β) microstructure, the volume fraction of the phases is shown to be the main factor that determines the mechanical properties.     

X-ray absorptiometry

Bone mass measurements are essential in the diagnosis of osteoporosis, the monitoring of its progression, and the evaluation of therapeutical responses. Among various methods of bone mass measurements, single- and dual-X-ray absorptiometry, SXA and DXA, have shown excellent fundamental performance. In this paper, the principles of SXA and DXA; i.e., factors of fundamental performance, such as precision, data-acquisition, and radiation dose, the practice of DXA, recent advances in DXA, such as the lateral spine scan, the measurement of body composition, application to BMD measurement of the bones of small animals and at sites of metal implants, morphometry of the spine, and geometrical measurement in the proxial femur, and clinical applications to osteoporosis were particularly reviewed.     

Radiation tolerance for the SMASH-series front-end chips for a silicon micro-strip detector

The radiation tolerance for prototype front-end chips designed for a silicon micro-strip detector was examined with a ⁶⁰Co irradiation source to establish an allowable range of the radiation dose. The irradiated front-end chips were SMA²SH-64A, a 64-channel preamplifier array; SMA²SH-1, a single-channel preamplifier circuit with a comparator; and Control-C, a digital-control chip for the preamplifiers.     

Thermal Expansion of Solid Solutions in the ZrTiO4—In2O3—M2O5 (M = Sb, Ta) System

Axial and dilatometric thermal expansions and phase transformations were studied for solid solutions having the α-PbO₂ structure in the ZrTiO₄—In₂O₃—M₂O₅ (M = Sb, Ta) system with nominal formulas of Zr _x Ti _y In _z Sb _z O₄ and Zr _x Ti _y In _z Ta _z O₄ where x + y + 2 z = 2. With increased substitution of z , the cell volume increased, the difference in the b parameters at room temperature between those quenched from 1400° and 1000°C decreased, and the thermal expansion decreased. The axial thermal expansion of ZrTi _y In _z · Ta _z O₄ with z = 0.3 was almost identical with that of HfTiO₄, and those with z = 0.4 and z = 0.45 were smaller than that of HfTiO₄. Unit-cell volumes of these compound were compared with those of single oxides to make it clear that the unit-cell volume of ZrTiO₄ was small anomalously and to distinguish the normal and abnormal substitution systems. These results were explained by the working hypothesis proposed for these compounds.     

Network Design with Edge-Connectivity and Degree Constraints

We consider the following network design problem; Given a vertex set V with a metric cost c on V, an integer k≥1, and a degree specification b, find a minimum cost k-edge-connected multigraph on V under the constraint that the degree of each vertex v∈V is equal to b(v). This problem generalizes metric TSP. In this paper, we show that the problem admits a ρ-approximation algorithm if b(v)≥2, v∈V, where ρ=2.5 if k is even, and ρ=2.5+1.5/k if k is odd. We also prove that the digraph version of this problem admits a 2.5-approximation algorithm and discuss some generalization of metric TSP.     

Constant-phase-mode operation of the light-addressable potentiometric sensor

The constant-phase-mode operation of the light-addressable potentiometric sensor (LAPS) is proposed and demonstrated. In this new operation mode, the temporal change and the spatial distribution of the analyte concentration are recorded in the form of the bias voltage applied to the LAPS sensor plate, which is servo-controlled to maintain the phase of the photocurrent at a constant value with respect to the light modulation. The constant-phase-mode LAPS is advantageous for its wider measurement range and reduction of artifacts.     

Damage to seagrass and seaweed beds in Matsushima Bay,Japan, caused by the huge tsunami of the Great East Japan Earthquake on 11 March 2011

Damage to seagrass and seaweed beds caused by the huge tsunami of the Great East Japan Earthquake on 11 March 2011 was investigated in Matsushima Bay, Miyagi Prefecture, Japan, by comparing satellite images taken before the tsunami in November 2009 and after the tsunami in May 2011. The results showed that the tsunami destroyed 220 ha of seagrass and seaweed beds, from 320 ha in 2009 to 100 ha just after the tsunami. Zostera marina beds on the sandy and muddy bottom were rather severely damaged compared with brown seaweed beds of Sargassum horneri on the rocky substrate. Substrates of the beds and directions of the tsunami seem to be responsible for the magnitude of the damage to the beds. Maps of the spatial distributions of the beds before and after the tsunami can provide information for the restoration of seagrass and seaweed beds as natural infrastructures of coastal fisheries resources.     

Automated discovery of local search heuristics for satisfiability testing

The development of successful metaheuristic algorithms such as local search for a difficult problem such as satisfiability testing (SAT) is a challenging task. We investigate an evolutionary approach to automating the discovery of new local search heuristics for SAT. We show that several well-known SAT local search algorithms such as Walksat and Novelty are composite heuristics that are derived from novel combinations of a set of building blocks. Based on this observation, we developed CLASS, a genetic programming system that uses a simple composition operator to automatically discover SAT local search heuristics. New heuristics discovered by CLASS are shown to be competitive with the best Walksat variants, including Novelty+. Evolutionary algorithms have previously been applied to directly evolve a solution for a particular SAT instance. We show that the heuristics discovered by CLASS are also competitive with these previous, direct evolutionary approaches for SAT. We also analyze the local search behavior of the learned heuristics using the depth, mobility, and coverage metrics proposed by Schuurmans and Southey.     

The 2-NN Rule for More Accurate NN Risk Estimation

By proper design of a nearest-neighbor (NN) rule, it is possible to reduce effects of sample size in NN risk estimation. The 2-NN rule for the two-class problem eliminates the first-order effects of sample size. Since its asymptotic value is exactly half that of the 1-NN rule, it is possible to substitute the 2-NN rule for the 1-NN rule with a resultant increase in accuracy. For further stabilization of the risk estimate with respect to sample size, 2-NN polarization is suggested. Examples are included. The 2-NN approach is extended to M-class and 2k-NN.