Mechanisms of orientational and photoelastic birefringence generation of methacrylates for the design of zero–zero‐birefringence polymers

The intrinsic birefringence Δn⁰ and photoelastic coefficient C of poly(methyl methacrylate), poly(2,2,2‐trifluroethyl methacrylate), poly(phenyl methacrylate), and poly(2,2,3,3,3‐pentafluorophenyl methacrylate) were determined. We categorized these methacrylate polymers into four birefringence‐types, even though their molecular structures differed only by the substituents on the side chains. Based on the results of Δn⁰ and C, novel polymers that exhibit neither orientational nor photoelastic birefringence, i.e., zero–zero‐birefringence polymers, were designed and synthesized by quaternary copolymerization system. Furthermore, we confirmed that the mechanisms of orientational birefringence and photoelastic birefringence generation were different in these methacrylate polymers. The conformation of the repeat unit of the polymers was nearly constant during the generation of orientational birefringence. In contrast, the conformation of the repeat unit of the polymers changed during the generation of photoelastic birefringence in the glassy state. These findings demonstrated the reasonability of evaluating orientational and photoelastic birefringence separately, as well as the adequacy of the classification of polymers into four birefringence‐types. Given these results and the fact that zero–zero‐birefringence polymers could be prepared successfully by four‐birefringence type monomers, we demonstrated the reasonability of the method for designing the zero–zero‐birefringence polymers. POLYM. ENG. SCI., 55:1330–1338, 2015. © 2015 Society of Plastics Engineers     

A body-shadowing model for indoor radio communication environments

Deterministic propagation prediction methods proposed for indoor radio are useful for estimating the average propagation loss in real environments, which usually have complicated geometries. On the other hand, these methods generally fail to accommodate human body shadowing, which is a significant propagation effect in indoor picocells. Several empirical models to describe body shadowing have been reported. However, to our knowledge, no appropriate model that can be used in combination with deterministic propagation prediction methods has been provided in the literature. In this paper, a new practical model is introduced, which provides a way to estimate body-shadowing effects deterministically with the existing ray-determination methods. The detailed procedure to combine our body-shadowing model with the ray-determination methods is described. Several examples are shown applying the procedure to a simple office layout     

Constant-phase-mode operation of the light-addressable potentiometric sensor

The constant-phase-mode operation of the light-addressable potentiometric sensor (LAPS) is proposed and demonstrated. In this new operation mode, the temporal change and the spatial distribution of the analyte concentration are recorded in the form of the bias voltage applied to the LAPS sensor plate, which is servo-controlled to maintain the phase of the photocurrent at a constant value with respect to the light modulation. The constant-phase-mode LAPS is advantageous for its wider measurement range and reduction of artifacts.     

Damage to seagrass and seaweed beds in Matsushima Bay,Japan, caused by the huge tsunami of the Great East Japan Earthquake on 11 March 2011

Damage to seagrass and seaweed beds caused by the huge tsunami of the Great East Japan Earthquake on 11 March 2011 was investigated in Matsushima Bay, Miyagi Prefecture, Japan, by comparing satellite images taken before the tsunami in November 2009 and after the tsunami in May 2011. The results showed that the tsunami destroyed 220 ha of seagrass and seaweed beds, from 320 ha in 2009 to 100 ha just after the tsunami. Zostera marina beds on the sandy and muddy bottom were rather severely damaged compared with brown seaweed beds of Sargassum horneri on the rocky substrate. Substrates of the beds and directions of the tsunami seem to be responsible for the magnitude of the damage to the beds. Maps of the spatial distributions of the beds before and after the tsunami can provide information for the restoration of seagrass and seaweed beds as natural infrastructures of coastal fisheries resources.     

Multiobjective evolutionary computation for supersonic wing-shapeoptimization

This paper discusses the design optimization of a wing for supersonic transport (SST) using a multiple-objective genetic algorithm (MOGA). Three objective functions are used to minimize the drag for supersonic cruise, the drag for transonic cruise, and the bending moment at the wing root for supersonic cruise. The wing shape is defined by 66 design variables. A Euler flow code is used to evaluate supersonic performance, and a potential flow code is used to evaluate transonic performance. To reduce the total computational time, flow calculations are parallelized on an NEC SX-4 computer using 32 processing elements. The detailed analysis of the resulting Pareto front suggests a renewed interest in the arrow wing planform for the supersonic wing     

A novel bistable reflective display using quick‐response liquid powder

Abstract— We have developed new powder materials that exhibit liquid behavior, which can lead to the realization of novel bistable and reflective displays having paper‐white appearance, high contrast, and quick response. Two types of display were demonstrated, one had 160 × 160 array of pixels and the other had 320 × 320 in a 3.1‐in.‐diagonal viewable image size corresponding to 66 and 132 dpi, respectively. These displays were driven by passive‐matrix addressing. The displays showed a reflectivity of more than 41%, a contrast more than 1:10, and a pixel response time of less than 0.2 msec. The seven‐segment display for use in clocks was also demonstrated.     

Thermal Spray Using a High-Frequency Pulse Detonation Combustor Operated in the Liquid-Purge Mode

Experiments on thermal spray by pulsed detonations at 150 Hz were conducted. Two types of pulse detonation combustors were used, one operated in the inert gas purge (GAP) mode and the other in the liquid-purge (LIP) mode. In both modes, all gases were supplied in the valveless mode. The GAP mode is free of moving components, although the explosive mixture is unavoidably diluted with the inert gas used for the purge of the hot burned gas. In the LIP mode, pure fuel-oxygen combustion can be realized, although a liquid-droplet injector must be actuated cyclically. The objective of this work was to demonstrate a higher spraying temperature in the LIP mode. First, the temperature of CoNiCrAlY particles heated by pulsed detonations was measured. As a result, the spraying temperature in the LIP mode was higher than that in the GAP mode by about 1000 K. Second, the temperature of yttria-stabilized zirconia (YSZ) particles, whose melting point was almost 2800 °C, heated by pulsed detonations in the LIP mode was measured. As a result, the YSZ particles were heated up to about 2500 °C. Finally, a thermal spray experiment using YSZ particles was conducted, and a coating with low porosity was successfully deposited.     

Inhibition of char deposition using a particle bed in heating section of supercritical water gasification

Supercritical water gasification (SCWG) has attracted attention as a technology for utilizing wet biomass. We used a fluidized bed of alumina particles to prevent blockage of a SCWG reactor. A glucose solution was heated in the reactor with and without fluidized alumina particles. In the absence of alumina particles, char particles formed homogeneously in the reactor, but the use of a fluidized bed resulted in accumulation of char particles at the reactor’s exit rather than inside the reactor. Therefore, the fluidized bed was effective at preventing blockage of the reactor. However, the alumina particles did not remove deposits from the reactor’s walls. Instead, the fluidized bed caused larger char particles to form, preventing their adhesion to the reactor’s wall.     

Preparation of Polymer-Based Nanocomposites Composed of Sustainable Organo-Modified Needlelike Nanoparticles and Their Particle Dispersion States in the Matrix

Polymer-based nanohybrid materials were created using sustainable sepiolite clay composed from ubiquitous elements. Although sepiolite is generally recognized as a fibrous natural clay mineral, it turned out to be an acicular microcrystal because of the organo-modification of the outermost surface. Surface modification was performed using phosphonic acid derivatives containing hydrocarbon chains or fluorocarbon chains. Formation of a bidentate bond enhanced the desorption temperature and made nanocomposite preparation possible by melt compounding with polymers having a high melting point. As a result of organo-modification, amphiphilic sepiolite was obtained, and nanodispersion in an organic solvent was achieved. This technology was useful for detailed evaluation of sepiolite morphology. The nanocomposite of crystalline polymers/organo-modified sepiolites achieved uniform dispersion of these nanofillers in the matrix polymer. The introduction of 1 wt% nanofillers did not impair the transparency of the matrix polymer. As a result, a lamellae structure of the polymer developed, the crystallinity increased, and the mechanical properties improved. In addition, the crystallization temperature was improved, indicating that organo-modified sepiolites may act as a nucleating agent. It was found that sepiolite nanofiller with a highly aggregated tendency can achieve a well-nanodispersed state, even in phase-separable fluoropolymers, by applying fluorocarbon modification. POLYM. ENG. SCI., 60:541–552, 2020. © 2019 Society of Plastics Engineers