弹性波衍射CT

本文直接从等价于弹性动力学Ｎａｖｉｅｒ方程的耦合齐次与非齐次矢量波动方程组出发，围绕弹性波衍射ＣＴ展开了理论研究，尤其是其非齐次方程含有震源项，同时适合Ｐ波和Ｓ波，考虑爆炸震源，引进塑性半径，运用张量运算，推导了Ｂｏｒｎ近似下散射波谱与目标函关系，得到二种数据采集方式下的层析成像ＦＢＰ公式，可同时适用于Ｐ波和Ｓ波，尽管与以往不涉及震源项的结果相似，但本结果更符合地震勘探情况。     

On the elemental effect of AlCoCrCuFeNi high-entropy alloy system

The AlCoCrCuFeNi high-entropy alloy system was synthesized using a well-developed arc melting and casting method. Their elemental effect on microstructures and hardness was investigated with X-ray diffraction, scanning electron microscopy and Vickers hardness testing. The alloys exhibit quite simple FCC and BCC solid solution phases. Co, Cu and Ni elements enhance the formation of the FCC phase while Al and Cr enhance that of the BCC phase in the alloy system. BCC phases form a spinodal structure during cooling. Copper tends to segregate at the interdendrite region and forms a Cu-rich FCC phase. Low copper content renders the interdendrite as a thin film and the as-cast structure like recrystallized grain structure. The formation of BCC phases significantly increases the hardness level of the alloy system. The strengthening mechanism is discussed.     

框架结构焦仓的定向倒塌爆破

介绍了框架结构焦仓定向爆破拆除的设计与施工，着重介绍了爆破参烽的选取及安全防护措施。达到预期的爆破效果。     

基于ANN实现的供应需求预测方法

基于人工神经网络技术，建立了后勤供应需求的网络预测方法，并以某区域高校后勤保障需求为例，给出了后勤供应需求预测的步骤与实现过程。     

二次电池电极基板用复合多孔金属材料的研究

介绍了一种复合金属多孔体的制备及其方法，首先以泡沫塑料为芯膜，经过导电化处理使其具有导电性，其次进行电沉积金属铁，再进行电沉积金属镍，经过热处理后可制备出复合金属多孔体。该复合金属多孔体用铁取代金属镍，其抗拉性能优于单质泡沫镍，同时可以降低制造成本，主要用于载体如电池电极。     

一种8毫米波变张角,半径突变多模圆锥馈源

我们研制了一种8毫米波变张角、半径突变的多模圆锥馈源。计算出其模比并推导出其辐射方向图公式;给出其在两个主平面——E平面与H平面上的辐射方向图和波束场分布特性的测试结果以及电压驻波比VSWR的测量结果;同时给出频带和旁瓣特性。分析与测试共同表明,在34.5GHz～37GHz频带里,该多模馈源的辐射图在大于24dB范围内获得幅度等化且不出现旁瓣,因此具有一定的应用价值。     

松材线虫病害高光谱时序与敏感特征研究

采用高光谱仪ASD FieldSpec Pro FR,连续观测了健康和发病马尾松针叶的时序高光谱,分析了松材线虫病害光谱的时序特征、敏感时期和敏感特征。结果表明:与健康马尾松相比,病害马尾松时序光谱差异较大;病害首先造成红边区域内光谱反射率减低,然后再出现红边蓝移的2阶段光谱变化规律;感染松材线虫的马尾松9月初已经出现了病态植被典型的光谱特征;近红外平台内最大的一阶微分值、红边内一阶微分的总和(SDr)与蓝边内一阶微分的总和(SDb)的比值等是指示病害发生的显著性高光谱特征。     

Optimal Performance in Tracking Stochastic Signal Under Disturbance Rejection

The analysis method of optimal tracking performance is proposed for multiple‐input multiple‐output (MIMO) linear time‐invariant (LTI) systems under disturbance rejection. An H₂ criterion of the error signal between the output of the plant and the reference signal is used as a measure for the tracking performance. Spectral factorization is applied to obtain the optimal solution of the system tracking error. The explicit expressions are derived for this minimal tracking error with respect to random reference signals under disturbance rejection. It is shown that the nonminimum phase zeros, the zero direction, the unstable poles, the pole direction of a given plant, statistical characteristics of the reference input signal, and disturbance signal have a negative effect on a feedback system's ability to reduce the system error with disturbance rejection. The results show that the optimal tracking performance will further be damaged because of disturbance rejection. Some typical examples are given to illustrate the theoretical results.     

即时定向新闻采集技术研究

互联网的迅速发展带动了信息量的爆炸性增加。如何更快地采集所需信息一直是国内外研究和开发的热点。近年来,不断增长的对特定信息(例如特定领域的新闻)的需求要求有针对性地从指定的网站即时采集相关信息。这些新闻一般具有不可预见性、更新频率较快、时效性强等特点。这要求我们必须能针对这些特点实现即时定向的采集。本文提出了一种有效抓取网页并进行分析的方法,实践表明取得了满意的效果。     

Physical properties of transition to chaos in RF-driven Josephson junction analog

An analog circuit is used to investigate the behavior of the transition to chaos in the rf-driven Josephson junction under the variation of excitation amplitude and frequency with McCumber parameter >1. A series of transitions is observed, including a hysteretic jump, symmetry breaking, period doubling, and intermittency prior to chaos, and the transition boundaries are given in a state diagram in the vs. parameter space. Thus, the sequence of transitions to chaos can be inferred from this diagram. Based on these results, the harmonic balance method and Floquet theory are applied to study the instability of the transition series. It is suggested that all these transitions to chaos can be explained as parametric excitations. In addition, the transition boundaries in the state diagram can be satisfactorily computed from the conditions with a Floquet multiplier =±1.