Ammonia production using iron nitride and water as hydrogen source under mild temperature and pressure

Ammonia generation was studied in the reaction between water and nitrogen-containing iron at 323 K and atmospheric pressure. Similar to metallic Fe, the interstitial compound Fe₃N reduced water through Fe oxidation to produce hydrogen gas, while the N combined with atomic hydrogen to produce ammonia as a byproduct. The addition of carbon dioxide to this system accelerated the reaction with concomitant consumption of carbon dioxide. The promoted ammonia production upon addition of carbon dioxide can be attributed to the generation of atomic hydrogen from the redox reaction of carbonic acid and Fe, as well as removal of used Fe from the reaction system through the formation of a soluble carbonato complex. When carbonate was added to the reaction system, the production rates of ammonia and hydrogen increased further. The results here confirmed that ammonia can be synthesized from iron nitride under mild conditions by utilizing carbon dioxide.     

Clinical and serological study of tsutsugamushi disease in northern Osumi, Kagoshima Prefecture

We report 34 cases of tsutsugamushi disease seen from 1989 to 1993 at Yagi Clinic, northern Osumi, Kagoshima Prefecture. Nineteen patients (55.9%) showed the highest antibody titers against the Kawasaki strain Orientia tsutsugamushi (Ot) and 13 (38.2%) against the Kuroki strain Ot. It is suggested that two antigenic types (Kawasaki and Kuroki) of Ot were distributed in Kagoshima Prefecture, and the Kawasaki type Ot more or less dominates Kuroki type Ot. There was no difference in clinical features between the two groups of patients.     

The temperature dependence of luminescence from a long-lasting phosphor exposed to ionizing radiation

The temperature dependence of luminescence from a long-lasting phosphor (LLP), SrAl₂O₄ : Eu²⁺,Dy³⁺, exposed to ionizing radiation has been measured to understand the LLP luminescence mechanism. Evaluation of the decay constants of the LLP exposed to -, β- or γ-rays at temperatures from 200 to 390 K showed that the decay constant is divided into four components ranging from 10⁻⁴ to 10⁻¹ s⁻¹ with activation energies of 0.02–0.35 eV.

Total luminous intensity from the LLP with changing irradiation temperature has its maximum value around the room temperature. Irradiation at elevated temperature (390 K) has the total luminescence pattern with monotonous decrease as temperature rises. As a result of evaluating the temperature dependence of luminescence, the luminescence mechanism is considered as follows:

Full-size image

 

Improvement of levitation characteristics in a magnetic bearing system using HTSC‐permanent magnet hybrid structure

Magnetic bearing using pinning force of a permanent magnet and a high‐temperature superconductor has been developed. Additional permanent magnet is introduced to increase the levitation force of the magnetic bearing. In this hybrid magnetic bearing system, levitation force is mainly given by the repulsive force of the permanent magnets, and stability for the lateral direction is given by pinning force of the superconductor. The experimental device is developed. A ring‐type superconductor and a bulk one are examined. Levitation characteristics of the hybrid magnetic bearing are measured. The bulk superconductor shows better characteristics of both levitation and lateral stability than the ring one. Levitation force of the hybrid system becomes about twice as large as that of the nonhybrid one. Although, the repulsive force of the permanent magnet decreases the lateral stability of the system, its influence becomes small by choosing an adequate position of the permanent magnets and the superconductor. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 71–77, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10350     

Onchocerca suzukii n. sp. and O. skrjabini (= O. tarsicola) from a relict bovid, Capricornis crispus, in Japan

The species from the tendons and sub-cutaneous tissue of the tarsal and carpal joints is identified as O. skrjabini Rukhlyadev, 1964 (this taxon, which was poorly defined and badly restored, is used instead of O. tarsicola to avoid dispute). O. skrjabini belongs to on homogeneous group of four species parasitic in Palearctic cervids, which seems to have evolved relatively recently. The morphological characteristics of the parasite of Capricornis are not sufficient to warrant the creation of a new taxon. The species from the subcutaneous tissue of the body is named O. suzukii n. sp. It belongs to a group comprising three species, parasites of antilocaprids and cervids from the Holarctic region and tropical domestic bovines, which seem to have evolved before the skrjabini group. The Japanese species does not present the hypertelic characters of the other species of the group. The microfilaria of O. suzukii is unknown. Thus it is not possible to say if this species is the same as one found in bovines (and, perhaps, in humans) in the Oita region of Kyushu Island.     

Channelling studies on the lattice location of B atoms in graphite

In order to obtain information on the lattice location of B atoms in graphite, channelling experiments have been performed at room temperature with a proton beam of an energy of 0.65-0.77 MeV for the 〈0 0 0 1〉 axial channel in highly oriented pyrolytic graphite (HOPG) crystals doped with 0.32 at.% B. The B atoms are detected by measuring α-particles which are emitted as a result of a nuclear reaction ¹¹B(p,α)αα. It is clearly demonstrated that most of B atoms are shadowed behind the 〈0 0 0 1〉 C atomic rows. Taking account of the already reported experimental results on a change of lattice parameters by B-doping, it is concluded that most of B atoms are located at substitutional sites. It is also observed that B-doping introduces lattice strain on the c-plane. In addition, the presence of a small portion of interstitial B atoms is suggested.     

Neutronic and thermodynamic feasibility of UF6-NpF6 fueled transmutation reactor

Transmutation of neptunium, which is contained in radioactive wastes discharged from nuclear reactors, was investigated as a substitutional method for geologic disposal. We proposed a transmutation reactor fueled with a mixture of gaseous ²³³UF₆ and ²³⁷NpF₆. Neutronic and thermodynamic analysis of the reactor revealed the feasibility of the concept. The reactor has two principal advantages: (1) use of the fuel gas enables on-line reprocessing, (2) ²³⁷Np can be transmuted by a high neutron flux. Our calculation indicated that the transmutation rate of ²³⁷Np was 335 g/year/MW_th, which is much larger than the annual yield of ²³²Np in PWR (6.19 g/year/MW_th).     

Fabrication of damascene Cu wirings using solid acidic catalyst

The copper damascene process is one of the most promising technologies for fabricating Cu wirings for electronic devices such as LSIs. In this research, the fabrication of damascene Cu wirings was conducted using solid acidic catalyst. When a Cu-plated wafer, whose oxide is a basic oxide is dipped into a mixture of oxidizing solution and acidic solution, surface atoms are ionized and etched off into the solution. However, because conventional nonelectrolytic etching does not have a reference surface, it is difficult to utilize for planarization. Therefore, a new nonelectrolytic machining method using a cation-exchange fabric instead of an acidic solution was developed. To be more precise, the planarization of a Cu-plated wafer was carried out by rubbing with the cation-exchange fabric in ozone water. Basically, this method exploits chemical reactions so that the physical properties of the workpiece surface are not deteriorated. Furthermore, this method uses no chemicals except for ozone water, which easily dissociates into water and oxygen molecules; thus, this method is a low-cost, environmentally friendly process. In this paper, as a preliminary experiment, the nonelectrolytic etching of a Cu sample using solutions of O₃ and CO₂ was carried out to inspect the dependence of the etching rate on [O₃] and [H⁺]. The results indicate that the etching rate increased as [O₃] and [H⁺] increased. When [H⁺] was high relative to [O₃], a smooth etch-pit-free surface was achieved. Next, nonelectrolytic etching using a cation-exchange fabric was carried out, and properties similar to those in the case of etching using solutions were obtained. Finally, damascene Cu wirings were fabricated using ozone water and a cation-exchange catalyst.     

Keratinocyte differentiation is induced by cell-permeant ceramides and its proliferation is promoted by sphingosine

Antibody titres against Plasmodium falciparum and P. vivax were examined using the indirect fluorescent antibody test (IFAT) for 183 Gidra-speaking adults and adolescents in four ecologically different villages of lowland Papua New Guinea. The findings highlight that 1) in Gidraland P. falciparum was more prevalent than P. vivax, 2) the proportion of antibody titres of 1:64 or higher markedly differed among the villages, ranging from 35.3% to 100% for males and from 31.6% to 100% for females, and 3) in the two villages with high prevalences, these were higher among males than females. The inter-village and sex differences can be largely explained by microenvironmental conditions and behavioural patterns of the population. The population-based analyses of this study intend to contribute to a better understanding of the prevalence of malaria in human-environment settings and thus to the planning of malaria prevention.