Potential of pulsed electric field to control Aspergillus parasiticus,aflatoxin and mutagenicity levels: Sesame seed quality

Seed processing technologies are essential for seed safety and functionality through protection of physicochemical quality, pathogen inactivation, aflatoxin detoxification and alleviation of mutagenicity. Design of a pilot-scale unit of pulsed electric fields (PEF) to treat sesame seeds with respect to quality parameters, Aspergillus parasiticus inactivation and aflatoxin reduction as well as alleviation of aflatoxin mutagenicity were prompted in this study. PEF energy ranged from 0.97 to 17.28 J achieved maximum reductions of peroxide value and acidity number of 67.4 and 85.7%, respectively, and did not change color L*, a*, b* and hue values. A 60% reduction of A. parasiticus counts occurred at the maximum PEF energy. Aflatoxins G1, G2, B1, and B2 contents decreased by 94.7, 92.7, 86.9, and 98.7%, respectively. Except for the samples treated by 2.16 J with 100 μg/plate and by 6.80 J with 10 μg/plate, PEF treatment provided elimination of aflatoxin mutagenity. It is concluded that PEF treatment can be used to treat sesame seeds with preservation of physicochemical properties, inactivation of A. parasiticus and decomposition of aflatoxins with reduced mutagenicity.     

Glyconanoparticle–DNA Interactions: An Atomic Force Microscopy Study

Glyconanoparticles which present carbohydrate and amino groups motifs at their surface were produced. These particles were highly stable and soluble in aqueous solutions. The presence of the carbohydrate groups also allowed the inclusion of more strongly binding groups, without affecting solubility. The binding of a model DNA, plasmid by these nanoparticles was studied by atomic force microscopy, transmission electron microscopy, and gel electrophoresis. Significant differences between the nanoparticles based on their affinities for the DNA were found, with implications for their potential use as nonviral gene delivery agents.     

Ant colony optimization approach to estimate energy demand of Turkey

This paper attempts to shed light on the determinants of energy demand in Turkey. Energy demand model is first proposed using the ant colony optimization (ACO) approach. It is multi-agent systems in which the behavior of each ant is inspired by the foraging behavior of real ants to solve optimization problem. ACO energy demand estimation (ACOEDE) model is developed using population, gross domestic product (GDP), import and export. All equations proposed here are linear and quadratic. Quadratic_ACOEDE provided better-fit solution due to fluctuations of the economic indicators. The ACOEDE model plans the energy demand of Turkey until 2025 according to three scenarios. The relative estimation errors of the ACOEDE model are the lowest when they are compared with the Ministry of Energy and Natural Resources (MENR) projection.     

Thermodynamic analysis of solar photovoltaic cell systems

The thermodynamic characteristics of solar photovoltaic (PV) cells are investigated from a perspective based on exergy. A new efficiency is developed that is useful in studying PV performance and possible improvements. Exergy analysis is applied to a PV system and its components, and exergy flows, losses and efficiencies are evaluated. Energy efficiency is seen to vary between 7% and 12% during the day. In contrast, exergy efficiencies, which incorporate the second law of thermodynamics and account for solar irradiation exergy values, are lower for electricity generation using the considered PV system, ranging from 2% to 8%. Values of “fill factors” are determined for the system and observed to be similar to values of exergy efficiency.     

Investigation of the Effects of some Parameters in the Production of Chromate from Chromite Ores in Iskenderun Region

The conversion of chromite ore from iskenderun region into chromate was investigated. Firstly, the chromite ore was analysed using conventional chemical methods. Then, the effect of some parameters such as roasting time, temperature and the amount of additives on the conversion efficiency to the chromate was examined. The optimum roasting conditions were determined as 300°C, 2 hours, 10 times the stoichiometrically required amounts of NaClO₃ and 6 times the stoichiometrically required amounts of KOH. Under these conditions, the maximum recovery of chromate was found to be 100%. The product obtained from the roasting process was leached with water to produce a clean chromate solution. The effect of temperature and solid/liquid (S/L) ratio was investigated in the water leaching experiments. The optimum experimental results obtained were 100% at a 1:5 solid to water ratio at 25°C and 20 min leaching period. The chromate solution was purified using conventional purification processes.     

Low-noise properties of dry gate recess etched InP HEMTs

Lattice-matched InAlAs-InGaAs HEMTs with dry etched and wet etched gate recesses have been fabricated and both high-frequency and noise measurements have been carried out. The highly selective dry etching process ensures uniform device parameters. The small signal and noise performance shows only minor differences between the two transistor types. There is no evidence of detrimental effects caused by dry etching that reduce the electrical and noise performance of the device at high frequencies. These results show that dry etched InP HEMT's have suitable characteristics for the fabrication of MM-wave integrated circuits     

Heat evolution of high-volume fly ash concrete

In this paper, the results of a laboratory investigation conducted with heat evolution of high-volume fly ash (HVFA) concrete are presented. Heat evolution of concrete was studied by measuring the temperature increase in concrete under adiabatic curing condition. Characteristic of heat evolution of fly ash concrete was found to be strongly dependent on the replacement level of fly ash and dosage of superplasticizer used to maintain workability. It was also found that using fly ash as cement replacement resulted in a reduction on the maximum temperature rise. Increasing the replacement level of fly ash caused lower temperature rise in concrete. Superplasticizer caused a delay in peak temperature rise time; this is taken as an indicator that high-dosage superplasticizer used in concrete caused retardation in hydration of cement. Concretes having similar ingredients showed similar peak temperature rise whether they are superplasticized or not.     

Preparation and sintering behaviour of submicronic Bi4Ti3O12 powders

Submicronic powders of Bi₄Ti₃O₁₂ with different morphologies were prepared by both the oxalate coprecipitation and the conventional mixing oxides methods. Compacts of the two calcined powders were sintered at 850–1100 °C in air, and the densification process was studied by non-isothermal and dilatometric experiments. A rapid densification (> 97% theoretical density) below 875 °C took place in the Bi₄Ti₃O₁₂ oxalate powder which was attributed to an extremely uniform pore-size distribution in the green compact. The possible formation of a transient liquid which promotes densification also was taken into account. The development of plate-like morphology in the conventional Bi₄Ti₃O₁₂ powder, broad pore-size distribution, and the plate-like colony formation, hindered rapid densification of the green compacts at low temperature. Microstructural development was studied; preliminary dielectric and electrical results are also reported.     

Effect of Aluminum Content on the Dynamic Recrystallization of Fe18MnxAl0.74C Steels During Hot-Forging Treatments

Metallurgical and Materials Transactions A - In the present work, the dynamic recrystallization and microstructural evolution of the family of advanced high-strength steels Fe18MnxAl0.74C are...