Impact of high-intensity ultrasound on physical properties and degree of oxidation of lipase modified menhaden oil with caprylic acid and/or stearic acid

The purpose of this research was to determine the effect of high-intensity ultrasound (HIU) on physical properties, degree of oxidation, and oxidative stability of structured lipids (SLs). Caprylic acid (C) and stearic acid (S) were incorporated into menhaden oil using Lipozyme® 435 lipase to obtain five samples: (1) LC 20 (menhaden oil with 20% of C), (2) LC 30 (menhaden oil with 30% C), (3) LS 20 (menhaden oil with 20% S), (4) LS 30 (menhaden oil with 30% S), and (5) Blend C (menhaden oil with 16.24% C and 13.04% S). Samples were crystallized for 90 min at the following temperatures: (1) LC 20 at 15.5°C, (2) LC 30 at 17.5°C, (3) LS 20 at 24°C, (4) LS 30 at 30°C, and (5) Blend C at 18.0°C, and HIU was applied at the onset of crystallization. Physical properties, degree of oxidation, and oxidative stability were evaluated in sonicated and nonsonicated samples. All SLs had statistically higher G′ after sonication. Sonicated LS 30, LC 30, and Blend C had a higher melting enthalpy than the nonsonicated ones, while enthalpy values in sonicated LS 20 and LC 20 samples were not statistically different than the nonsonicated ones. No significant difference between sonicated and nonsonicated samples was observed in peroxide values (1.2 ± 0.1 meq/kg, p > 0.05) and in the oxidative stability index (6.3 ± 0.2 h, p > 0.05). These results showed that HIU was effective at changing physical properties without affecting the oxidation of the samples.     

Development of calibration models for quality control in the production of ethylene/propylene copolymers by FTIR spectroscopy,multivariate statistical tools,and artificial neural networks

Principal component regression (PCR), partial least squares (PLS), StepWise ordinary least squares regression (OLS), and back‐propagation artificial neural network (BP‐ANN) are applied here for the determination of the propylene concentration of a set of 83 production samples of ethylene–propylene copolymers from their infrared spectra. The set of available samples was split into (a) a training set, for models calculation; (b) a test set, for selecting the correct number of latent variables in PCR and PLS and the end point of the training phase of BP‐ANN; (c) a production set, for evaluating the predictive ability of the models. The predictive ability of the models is thus evaluated by genuine predictions. The model obtained by StepWise OLS turned out to be the best one, both in fitting and prediction. The study of the breakdown number of samples to be included in the training set showed that at least 52 experiments are necessary to build a reliable and predictive calibration model. It can be concluded that FTIR spectroscopy and OLS can be properly employed for monitoring the synthesis or the final product of ethylene–propylene copolymers, by predicting the concentration of propylene directly along the process line. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Binary and m-ary encoding in applications of tree-based genetic algorithms for QoS routing

Ubiquitous and Pervasive Computing (UPC) applications often have Quality of Service (QoS) requirements. These become constraints for the UPC network infrastructure. In this paper, we refer to Mobile ad Hoc Networks, one of the most important technologies supporting UPC, and investigate on Genetic Algorithms (GAs) for QoS routing. GAs are part of the soft computing paradigm and can solve the NP search of QoS routes with multiple constraints. We elaborate on tree-based GAs, which represent the set of paths from source to destination as a tree and encode them through the crossed junctions. While their most well-known applications use m-ary encoding representing single paths in the chromosomes, in this paper we discuss a binary encoding with the objective of improving the convergence speed. The binary encoding represents classes of paths in the chromosomes and allows local search on classes of paths. These classes are both collectively exhaustive and mutually exclusive. Simulation results compare convergence speed and scalability of GA applications with binary and m-ary encoding in networks with an increasing number of nodes and links per node. As the per-class processing is reason of additional computational cost, an hybrid GA application that uses both binary and m-ary encoding is introduced.     

<Emphasis Type="Italic">In situ</Emphasis> monitoring of solid fat content by means of pulsed nuclear magnetic resonance spectrometry and ultrasonics

An ultrasonic technique was developed to study the crystallization process of edible fats on-line. A chirp wave was used instead of the conventional pulser signal, thus achieving a higher signal-to-noise ratio. This enabled measurements to be made in concentrated systems [≈20% solid fat content (SFC)] through a 8.11-cm thick sample without significant signal loss. Fat samples were crystallized at 20, 25, and 30°C at a constant agitation rate of 400 rpm for 90 min. The crystallization process was followed by ultrasonic spectroscopy and a low-resolution pulsed nuclear magnetic resonance spectrometer. Specific relationships were found between ultrasonic parameters [integrated response, time of flight (TF), and full width half maximum] and SFC. TF, which is an indirect measurement of the ultrasonic velocity (v), was highly correlated to SFC (r ²>0.9) in a linear fashion (v=2.601 SFC+1433.0).     

Effects of fullerenes and single-wall carbon nanotubes on murine and human macrophages

The discovery in 1985 of C-fullerenes, a novel carbon allotrope with a polygonal structure made up solely by 60 carbon atoms, and in 1991 of C-nanotubes, thin carbon filaments (1-3 μm in length and 0.001 μm in diameter) with extraordinary mechanical properties, opened a wide field of activity in carbon research. While toxicity and biocompatibility of C-fullerenes have been widely investigated, literature data concerning the biological properties and biotoxicity of C-nanotubes are poor and contradictory. Here we test the ability of highly purified C-Single-Walled-Nanotubes (SWNTs) and C-fullerenes to elicit an inflammatory response by murine and human macrophage cells in vitro. In order to determine the potential of these C-derivatives as biological inducers of inflammatory reactions we evaluate the ability of C-single-walled nanotubes and C-fullerenes to induce the release of NO by murine macrophages cells, to stimulate the phagocytic activity of human macrophage cells and to be cytotoxic against these cells. We show that SWNTs-C-nanotubes, when highly purified, as well as C-fullerenes, do not stimulate the release of NO by murine macrophage cells in culture, their uptake by human macrophage cells is very low, and they possess a very low toxicity against human macrophage cells.     

Managing Workflow Authorization Constraints through Active Database Technology

The execution of workflow processes requires authorizations for enforcing the assignment of tasks to agents, either human or automated, according to the security policy of the organization. This paper presents a workflow authorization framework based on roles and organizational levels, and on authorization constraints. To facilitate the assignment of tasks to agents, roles and organizational levels are organized into hierarchies. Authorization constraints are introduced to specify instance-dependent, time-dependent, and history-dependent authorizations. Authorization constraints are specified in terms of active rules, used also for authorization management. The Workflow Management System determines authorized agents on the basis of the contents of an authorization base maintained through the active rules defined in the system.     

Subsumptive general solutions and parametric general solutions of Post equations

In this paper we generalize Rudeanu’s results from [13] to Post algebras. We give a necessary and sufficient condition for the existence of a Post function f such that the set of solutions of equation f(x) = 0 is a given interval. We also prove that every Post transformation is the parametric solution of some consistent Post equation.     

The ALTER-NATIVA knowledge management approach

Nowadays, it is commonly known that information systems need an agile capability of handling knowledge. To accomplish this, systems have to have a formal knowledge representation ability supported by specific and advanced reasoning features. This research work proposes a knowledge management approach with the purpose to gather, model and consume community knowledge for specific recommendation commitments. Such approach is accomplished by a semantic lexicon alignment between the various community knowledge assets, to facilitate collaborations establishment between people and systems in an interoperable fashion. Thus, a knowledge base supported by a thesaurus able to represent all the metadata needed to represent and characterize the various community stakeholders’ resources is proposed. The thesaurus represents the lexicon in the domain, which in the ALTER-NATIVA systems is mostly used to support the various e-Learning elements (e.g. courses) and users categorization, sustained by synchronization features to facilitate a constant update of its information. A set of services designed to recommend specific resources in relation to a determined profile of user is provided. Additionally, a discussion about how the ALTER-NATIVA knowledge management approach can be applied to industrial environments is presented.