Biodegradable hollow microfibres to produce bioactive scaffolds

Biodegradable hollow microfibres containing particles loaded with specific active agents can be potentially employed to produce a special kind of substrate for tissue engineering, able to function as a scaffold and at the same time to act as a drug‐releasing system. Biodegradable hollow microfibres based on poly(lactic acid) were produced by a dry–wet spinning procedure. Drug‐loaded microparticles were prepared by a simple oil‐in‐water emulsion and entrapped inside the fibres. The morphology of both fibres and particles was investigated by scanning electron microscopy. The mechanical and thermal properties of the fibres were investigated by tensile tests and differential scanning calorimetry. In vitro tests were performed to evaluate the release of the drug from the fibres loaded with the particles Copyright © 2004 Society of Chemical Industry     

Electrochromic properties of tungsten-molybdenum oxide electrodes

Tungsten oxide and molybdenum doped tungsten oxide electrochromic films have been electrochemically prepared from a metal peroxide bath and experimentally tested. They were characterized by electrical and optical methods, using cyclic voltammograms and calculating the charge capacity as a function of the number of deposition cycles.The color of the electrochromic WO₃ film is strongly altered by doping it with molybdenum. Electrochromic W---Mo oxide films were fabricated by adding different percentages of molybdenum to tungsten oxide, ranging from 0.5% to 7% weight of deposition solution. Normal optical transmittance was also measured and evidence is given of different behavior if the switching for oxidation and reduction cycle, so that coloration occurs in a shorter time than the bleaching. The time constant of the process tends to increase as a function of the molybdenum oxide doping concentration.     

Electrostatic destabilization of water-in-crude oil emulsions: Application to a real case and evaluation of the Aibel VIEC technology

In the current study, the Aibel Vessel Internal Electrostatic Coalescer (VIEC) technology was tested for a real case scenario encountered in the production train of a UK oil field. Depressurized samples were collected both upstream and downstream of the first stage separator. The separation performance was discussed with respect to water cut and droplet size distribution of the emulsions, and the effect of chemical treatment. Issues with respect to representative sampling and testing have been discussed. The application of an external AC electrical field has been shown to significantly enhance the separation of the aqueous phase from tight emulsions, both when it was used alone and in combination with a commercial demulsifier. By using the VIEC technology, the time for separation could be reduced from 8 min to 2 min and the overall BS&W in the emulsions was improved from 45% or 60% to a residual water content of 5-20%. Destabilization of a 45% water-in-oil emulsion by electrical and chemical treatment (20/40 ppm) produced oil in the 2-7% BS&W range whereas the corresponding tests without applying an electrostatic field led to a BS&W greater than 25%. The achieved results strongly suggest that the VIEC technology can resolve the stable emulsion bands encountered in the Schiehallion train and add flexibility or increased production rate to the process. The results also suggest the importance of further studies on the destabilization performances achieved by electrostatic means.     

On vector averaging over the unit hypersphere

Sample averaging is a commonly used way to smooth out irregularities of data and to get rid of random fluctuations in measurements analysis. In adaptive signal processing, where an adaptive system learns its own parameters in order to perform a predefined task, the learnt parameters-pattern may depend on the initial learning state and on the fluctuations of the statistical features of the input signals to the system. In adaptive system learning, averaging may be employed as a method to merge several learnt parameters-patterns in order to get a better representative pattern. Even in the case of scalar parameters, the concept of averaging is not uniquely defined as scalar parameters spaces may exhibit a rich structure to be dealt with. The case of multiple parameter patterns where single parameters are mutually constrained to each other may exhibit an even richer structure. In the present paper, we deal with the case of parameters-patterns belonging to the unit hypersphere and develop an averaging technique based on the differential geometrical structure of such a curved space. Numerical experiments illustrate the behavior of the developed averaging algorithm.     

Modeling Self-Rollable Elastomeric Films for Building Bioinspired Hierarchical 3D Structures

In this work, an innovative model is proposed as a design tool to predict both the inner and outer radii in rolled structures based on polydimethylsiloxane bilayers. The model represents an improvement of Timoshenko’s formula taking into account the friction arising from contacts between layers arising from rolling by more than one turn, hence broadening its application field towards materials based on elastomeric bilayers capable of large deformations. The fabricated structures were also provided with surface topographical features that would make them potentially usable in different application scenarios, including cell/tissue engineering ones. The bilayer design parameters were varied, such as the initial strain (from 20 to 60%) and the bilayer thickness (from 373 to 93 µm). The model matched experimental data on the inner and outer radii nicely, especially when a high friction condition was implemented in the model, particularly reducing the error below 2% for the outer diameter while varying the strain. The model outperformed the current literature, where self-penetration is not excluded, and a single value of the radius of spontaneous rolling is used to describe multiple rolls. A complex 3D bioinspired hierarchical elastomeric microstructure made of seven spirals arranged like a hexagon inscribed in a circumference, similar to typical biological architectures (e.g., myofibrils within a sarcolemma), was also developed. In this case also, the model effectively predicted the spirals’ features (error smaller than 18%), opening interesting application scenarios in the modeling and fabrication of bioinspired materials.     

Metabolic Pathways for Observed Impacts of Crop Load on Floral Induction in Apple

The triggers of biennial bearing are thought to coincide with embryonic development in apple and occurs within the first 70 days after full bloom (DAFB). Strong evidence suggests hormonal signals are perceived by vegetative apple spur buds to induce flowering. The hormonal response is typically referred to as the floral induction (FI) phase in bud meristem development. To determine the metabolic pathways activated in FI, young trees of the biennial bearing cultivar ‘Nicoter’ and the less susceptible cultivar ‘Rosy Glow’ were forced into an alternate cropping cycle over five years and an inverse relationship of crop load and return bloom was established. Buds were collected over a four-week duration within 70 DAFB from trees that had maintained a four-year biennial bearing cycle. Metabolomics profiling was undertaken to determine the differentially expressed pathways and key signalling molecules associated with biennial bearing. Marked metabolic differences were observed in trees with high and low crop load treatments. Significant effects were detected in members of the phenylpropanoid pathway comprising hydroxycinnamates, salicylates, salicylic acid biosynthetic pathway intermediates and flavanols. This study identifies plant hormones associated with FI in apples using functional metabolomics analysis.     

Energy Deposition around Swift Carbon-Ion Tracks in Liquid Water

Energetic carbon ions are promising projectiles used for cancer radiotherapy. A thorough knowledge of how the energy of these ions is deposited in biological media (mainly composed of liquid water) is required. This can be attained by means of detailed computer simulations, both macroscopically (relevant for appropriately delivering the dose) and at the nanoscale (important for determining the inflicted radiobiological damage). The energy lost per unit path length (i.e., the so-called stopping power) of carbon ions is here theoretically calculated within the dielectric formalism from the excitation spectrum of liquid water obtained from two complementary approaches (one relying on an optical-data model and the other exclusively on ab initio calculations). In addition, the energy carried at the nanometre scale by the generated secondary electrons around the ion’s path is simulated by means of a detailed Monte Carlo code. For this purpose, we use the ion and electron cross sections calculated by means of state-of-the art approaches suited to take into account the condensed-phase nature of the liquid water target. As a result of these simulations, the radial dose around the ion’s path is obtained, as well as the distributions of clustered events in nanometric volumes similar to the dimensions of DNA convolutions, contributing to the biological damage for carbon ions in a wide energy range, covering from the plateau to the maximum of the Bragg peak.     

An Integrated CAD Methodology for Yield Enhancement of VLSI CMOS Circuits Including Statistical Device Variations

In this paper a novel CAD methodology for yield enhancement of VLSI CMOS circuits including random device variations is presented. The methodology is based on a preliminary characterization of the technological process by means of specific test chips for accurate mismatch modeling. To this purpose, a very accurate position-dependent parameter mismatch model has been formulated and extracted. Finally a CAD tool implementing this model has been developed. The tool is fully integrated in an environment of existing commercial tools and it has been experimented in the STMicroelectronics Flash Memory CAD Group.As an example of application, a bandgap reference circuit has been considered and the results obtained from simulations have been compared with experimental data. Furthermore, the methodology has been applied to the read path of a complex Flash Memory produced by STMicroelectronics, consisting of about 16,000 MOSFETs. Measurements of electrical performances have confirmed the validity of the methodology, and the accuracy of both the mismatch model and the simulation flow.