Electrochemical mass transfer between an impinging jet and a rotating disk in a confined system

This paper presents the mass transfer results from an impinging liquid jet to a rotating disk. The mass transfer coefficients were measured using the electrochemical limiting diffusion current technique (ELDCT). Rotational Reynolds number (Re_r) in the range of 3.4 × 10⁴–1.2 × 10⁵, jet Reynolds number (Re_j) 1.7 × 10⁴–5.3 × 10⁴ and non-dimensional jet-to-disk spacing (H/d) 2–8 were taken into consideration as parameters. It was found that the jet impingement resulted in a substantial enhancement in the mass transfer compared to the case of the rotating disk without jet.     

Electrical and optical properties of fluorine-doped CdO films deposited by ultrasonic spray pyrolysis

The CdO:F samples have been deposited onto microscope glass substrates at 250 °C by ultrasonic spray pyrolysis method. With the incorporation of fluorine into CdO, the direct optical transition has shifted towards the shorter wavelengths, and the transparency of the material has increased at a given wavelength above the fundamental absorption edge. The shift in the absorption edge is explained by means of the Moss–Burstein effect, which is also supported with the results of the current–voltage characteristics. Here, a correlation has been established between the band broadening and the increase in conductivity due to the increase in carrier density.     

Theoretical Investigation of Time Suboptimal Control of Industrial Manipulators Along Specified Paths

A method for the time suboptimal control of an industrial manipulator from an initial position and orientation to a final position and orientation as it moves along a specified path is proposed. Nonlinear system equations that describe the manipulator motion are linearized at each time step along the path. A method which gives the control inputs (joint angular velocities) for time suboptimal control of the manipulator is developed. In the formulation, joint angular velocity and acceleration limitations are also taken into consideration. A six degree of freedom elbow type manipulator is used in numerical examples to verify the method developed.     

A combo technology of autotrophic and heterotrophic denitrification processes for groundwater treatment

In this study,a sequential process (heterotrophic up-flow column and completely mixed membrane bioreactors) was proposed combining advantages of the both processes.The system was operated for 249 days with simulated and real groundwater for nitrate removal at concentrations varying from 25 to 145 mg·L-1 NO3-N.The contribution of heterotrophic process to total nitrate removal in the system was controlled by dozing the ethanol considering the nitrate concentration.By this way,sulfur based autotrophic denitrification rate was decreased and the effluent sulfate concentrations were controlled.The alkalinity requirement in the autotrophic process was produced in the heterotrophic reactor,and the system was operated without alkalinity supplementation.Throughout the study,the chemical oxygen demand in the heterotrophic reactor effluent was (23.7 ± 22) mg·L-1 and it was further decreased to(7.5 ± 7.2) mg·L-1 in the system effluent,corresponding to a 70％ reduction.In the last period of the study,the real groundwater containing 145 mg·L-1 NO3-N was completely removed.Membrane was operated without chemical washing in the first 114 days.Between days 115-249 weekly chemical washing was required.     

基于分位点的全局灵敏度及其求解方法

为探讨输入变量在随机不确定性环境下对产品的分位点(产品满足一定概率要求的输出性能的上限值)的影响,定义了基于分位点的输入变量的全局灵敏度分析(GSA)指标.该指标能够在给定的概率要求下全面衡量输入变量在其分布域中变化时对输出性能分位点的平均影响程度.揭示了该指标与已有的基于分布函数的全局灵敏度指标和基于失效概率的全局灵敏度指标的内在联系,并利用维度缩减方法和基于分数阶矩的极大熵算法以及Nataf变换来高效求解所提指标.通过数值和工程算例说明了基于分位点的全局灵敏度指标的物理意义,并验证了求解方法的精度和效率.     

Evaluation of damage to light structures erected on a fill material rich in expansive soil

The paper reports a study of the cause of defects in light structures and the toppling of a wall constructed on a fill material rich in Ankara clay. Laboratory tests were carried out on vertical and horizontal samples from boreholes and a trial pit was excavated near the damaged structures. The results showed that in the vicinity of the toppled wall, swelling pressures in the horizontal direction were greater than those measured in the vertical direction. The swelling properties of the fill material were higher than those of original Ankara clay as determined previously by other investigators, suggesting that breakdown of the cementing bonds and a change in the fabric are the main factors affecting the swelling pressure of disturbed and compacted expansive soils. The calculations to predict uplift showed a good agreement with the observations in the damaged structures. It is concluded that swelling was the main cause of the damage to the light structures at the study site and resulted from the highly expansive nature of the fill material, poor drainage, the semi-arid climate, poor construction methods and ineffective precautions. Some recommendations for minimizing the effects of swelling at the study site are briefly outlined.     

Stochastic resonance in binary composite hypothesis-testing problems in the Neyman–Pearson framework

Performance of some suboptimal detectors can be enhanced by adding independent noise to their inputs via the stochastic resonance (SR) effect. In this paper, the effects of SR are studied for binary composite hypothesis-testing problems. A Neyman–Pearson framework is considered, and the maximization of detection performance under a constraint on the maximum probability of false-alarm is studied. The detection performance is quantified in terms of the sum, the minimum, and the maximum of the detection probabilities corresponding to possible parameter values under the alternative hypothesis. Sufficient conditions under which detection performance can or cannot be improved are derived for each case. Also, statistical characterization of optimal additive noise is provided, and the resulting false-alarm probabilities and bounds on detection performance are investigated. In addition, optimization theoretic approaches to obtaining the probability distribution of optimal additive noise are discussed. Finally, a detection example is presented to investigate the theoretical results.     

Multi-sink load balanced forwarding with a multi-criteria fuzzy sink selection for video sensor networks

Congestion is a challenging problem in wireless sensor networks, which exacerbates with the high volume of data traffic imposed by video applications such as video surveillance and target tracking. Deployment of multiple sinks is a candidate solution for congestion and is also promising in terms of reliability and energy-efficiency. In order to gain the maximum benefit from multiple sinks, it is essential to distribute the load among them evenly. In this paper, we propose a cross layer geographic forwarding scheme MLBRF (Multi-Sink Load Balanced Reliable Forwarding) which aims to provide reliable and energy efficient video delivery in a multi-sinked sensor network for target tracking. In order to provide load balancing among the sinks, MLBRF proposes a sink selection mechanism based on fuzzy logic for the frame forwarding which evaluates the traffic density in the direction of each sink by combining two dynamic criteria which are the number of contenders and the buffer occupancy levels in the neighborhood with the static distance criterion. The performance of the fuzzy sink selection mechanism is compared using simulation with various sink selection mechanisms. The results show that MLBRF gains the maximum benefit from deploying multiple sinks in terms of reliability, latency and energy efficiency by using the proposed fuzzy sink selection mechanism.     

Preparation of lead (Pb) X-ray fluorescence reference materials for the EPA Pb monitoring program and the IMPROVE network using an aerosol deposition method

X-ray fluorescence (XRF) is a commonly used analytical method to quantify lead (Pb), a toxic element, in atmospheric aerosol. The commercially available reference materials used for calibrating XRF do not mimic the concentrations and filter materials of particulate matter (PM) monitoring networks. In this study, we described an aerosol deposition method to generate Pb reference materials (RMs) over a range of concentrations to serve several purposes for the US Environmental Protection Agency (EPA) and Interagency Monitoring of PROtected Visual Environments (IMPROVE) monitoring networks including laboratory auditing, federal equivalency method evaluation, and calibration and quality control of XRF instruments. The RMs were generated using a laboratory-built aerosol chamber equipped with a federal reference sampler at concentration levels ranging from 0.0125 to 0.70 μg/m³. XRF analysis at UC Davis was demonstrated to be equivalent to a US and EU reference method, inductively coupled plasma—mass spectrometry (ICP-MS), for measuring Pb on RMs following a methodology described in the United States and international standards. The Pb concentrations on subsets of the RMs were verified by three other XRF laboratories with different analyzers and/or quantification methods and were shown to be equivalent to the UC Davis XRF analysis. The generated RMs were demonstrated to have short and long-term stability, satisfying an additional requirement of reference materials.

Copyright © 2016 American Association for Aerosol Research     

分段进水比对两级A/O-海绵填料工艺处理DMF废水的影响

采用两级A/O-海绵填料工艺处理DMF废水,探究一级A/O缺氧池(A1)和二级A/O缺氧池(A2)分段进水比(8∶2、7∶3、6∶4、5∶5)对系统脱氮除碳效能影响。结果表明,两级A/O-海绵填料工艺在不同分段进水比条件下均能实现对COD的高效去除,COD平均去除率均达到95%以上,而系统对TN、NO;-N和NH;-N的去除受分段进水比影响较大。在较高(8∶2和7∶3)分段进水比条件下,系统TN去除率为81.39%~89.03%,此时TN主要以NH₄⁺-N和NO₃^--N形式存在;当分段进水比减小为6∶4时,系统TN去除率达到最优值91.33%,出水NH₄⁺-N和NO₃^--N均明显低于其余进水比工况,分别降至8.04 mg/L和7.06 mg/L。因此通过优化两级A/O-海绵填料工艺分段进水比,可提升高浓度有机氮废水中难降解碳源的利用率与控制氨化反应进程,实现DMF废水有机氮的高效去除。