Lichen sclerosus et atrophicus in a band-like arrangement

We report a case of lichen sclerosus et atrophicus (LSA) in a band-like arrangement. The patient had a white atrophic plaque on the left breast which showed the typical histological features of LSA. One month later, the patient had developed multiple, brown-colored plaques from the right breast to the right upper arm following the distribution of the peripheral nerve. These plaques showed the mild histological changes indicative of LSA. This band-like arrangement of LSA appears to be unique.     

Tensile properties and plastic deformation modes ofβ Zr-Nb alloys

Tensile properties and plastic deformation modes of zirconium-niobium alloys were investigated at 290 and 77 K in the wide composition range from metastable to stable phase. Three types of plastic deformation modes, {332}113 twinning, {112}111 twinning and slip, were observed depending on alloy composition and temperature. {332}113 twinning, which occurs in metastable zirconium alloys, is related to the stability of phase to decomposition and leads to low yield stress and large elongation. On the other hand, {112}111 twinning, which appears in stable zirconium alloys, results from high critical stress for slip due to solution hardening and high Peierls stress and does not affect tensile properties significantly. The results obtained for zirconium-alloys are similar to those for titanium alloys, strongly suggesting that {332}113 twinning is an important plastic deformation mode which is common to phase alloys containing athermal phase.     

Electron-microscopic procedure for acrylic rubber

The electron-microscopic visualization of acrylic rubber dispersed in a heterogeneous structural resin composition consisting of a rubber-modified two-phase plastic comprising essentially a butyl acrylate rubber phase and an acrylonitrile–styrene copolymer phase, respectively, has been accomplished. This procedure consists of the following: The molded resin specimen is treated with hydrazine hydrate solution to produce the acrylic acid hydrazides. Allow the treated specimen to soak in osmium tetroxide solution. The acrylic rubber may be indirectly fixed and stained. Some micrographs of ultrathin sections of two or three resin compositions, cut by an ultramicrotome, are presented.     

Sudden death of adults in Japan

Epidemiological features, risk factors and preventive methods of sudden death (SD) derived from studies the authors have performed since 1987 together with colleagues in Niigata University School of Medicine were reviewed. When SD was defined as death occurring within 24 hours of the onset of symptoms, the annual incidence was 145/100,000 for people aged 15 years and older in Niigata Prefecture. The incidence increased sharply along with the advance of age, while the proportion of SD to natural death due to circulatory diseases was higher in younger people. Though diseases of the circulatory system made up approximately 90 percent of all causes of death, SD due to ischemic heart disease was less frequent in Japan than in western countries. SD showed various patterns in seasonal and "within-a-day" occurrences according to sex, age and cause of death. The months of the highest SD occurrence differed by occupation and matched the busiest work periods. A decrease in sleeping hours and mental stress experienced during the preceding week were related to the occurrence of both sudden death and non-fatal acute myocardial infarction. People having structural circulatory diseases were shown to be predisposed to SD when stress occurred, because fatal arrhythmia is easily induced by the above factors in such people. Health examinations were shown to have preventive effects, though limited, against SD. Differences in the resuscitated rates in cases where a witness was present and where one was not indicates that educating people about correct resuscitation methods is important to minimizing SD.     

Superconductivity in dilute Cu-Nb-Sn alloys containing Nb3Sn precipitates

The dilute Cu-Nb-Sn alloys containing small amounts of Nb and Sn less than 1 at % exhibited superconductivity after quenching from the liquid state and ageing. The best superconducting properties ( andJ _c=130 A cm^–2) in a Cu-0.30 at % Nb 0.15 at % Sn alloy were obtained when the sample was aged at 550° C for 384 h. This sample exhibited a structure of fine Nb₃Sn precipitates of 200 to 500Å diameter distributed homogeneously in the Cu matrix, and therefore it was concluded that superconductivity in these alloys resulted from the proximity effect of Nb₃Sn particles. In spite of the similar structure obtained by ageing at 800° C, the Cu-Nb-Sn alloys showed inferior superconducting properties compared to the Cu-0.4 at % Nb alloy and this would be explained qualitatively by the difference in the mean free path in the two alloys.     

Morphological and crystallographic features of γ-γ′ Ni-Al and Ni-Al-Ti two-phase bicrystals

Several- Ni-Al and Ni-Al-Ti two-phase bicrystals were made by the solid-state diffusion couple method. Each couple consisted of a-phase single crystal and a pure-Ni polycrystal, and was annealed at 1473 K in an Ar gas atmosphere. Single crystal layers of-phase with uniform thickness always grow into the parent-phase single crystals. The resultant/ interface has no voids or facets regardless of the orientation of interface and the chemical composition of the-phase. Porosity formation due to the Kirkendall effect is observed in the diffused region. Concentration profiles exhibit nearly constant gradients in-phase. The orientation relationship between both phases is found to be 001//001, that is, the-phase grows epitaxially along the crystal orientation of-phase.     

Colorimetric microdetermination of sulphites in foods by use of the modified rankine apparatus. IV.

Summary Detection and determination of traces of sulphites in foods was attempted by use of the modified Rankine apparatus and pararosaniline colorimetry. Replacement of alkaline titration reported previously by pararosaniline colorimetry lowered the absolute detection limit from 30 g (titration method) to 2 g. In view of clean analysis, in the color developing system, 0.1 N-sodium hydroxide was used in place of mercuric chloride solution commonly used as an absorbant of sulphites. In order to prevent oxidative decomposition of sulphites during operation, nitrogen gas was used as carrier instead of air. Dimedone and sodium azide were used for the elimination of aldehydes and nitrites, respecitvely, in the sample, which will disturb the color development of sulphites with pararosaniline-formaldehyde reagents. With this improved method, it was possible to determine the residual sulphites in frozen peeled shrimps, sugared beans and other foods with low sulphite contents accurately.

---

Colorimetrische Mikrobestimmung von Sulfiten in Lebensmitteln bei Anwendung der modifizierten IV. Rankine Apparatur

Zusammenfassung Geringe Sulfitmengen in Lebensmitteln (geschälte Garnelen, gezuckerte Bohnen) können colorimetrisch bestimmt werden. Die neuentwickelte Methode beruht auf einer Kombination von colorimetrischer Bestimmung mittels p-Rosanilin und der Bestimmungsmethode nach Rankine. Auf diese Weise lassen sich Gehalte von 2 g noch genau bestimmen. Bei der Farbentwicklung wurde das giftige Quecksilbertetrachlorid durch 0.1 n-NaOH ersetzt, anstelle von Luft Stickstoff als Trägergas verwendet und somit eine Oxydation des Sulfits während der Bestimmung vermieden. Da Nitrit und Aldehyde die Farbentwicklung stören, wurde ihr Einfluß durch Dimedon und Natriumazid ausgeschaltet.

---

---

Studies on the Analyses of Sulphites in Foods (IV)     

Studies on Pyrodextrinization of Corn Starch

During pyrodextrinization of corn starch in the absence of any added catalyst under different experimental conditions, the changes of dextrinization might have two or threes stages and remarkable transformation would begin to occur at 190°C. At higher temperatures, many non-carbohydrates are found. At lower temperatures, side chains of amylopectin-like substances might be cleaved to produce the linear parts.