Preparation and characterization of modified telechelic natural rubber-based pressure-sensitive adhesive

Telechelic natural rubber (TNR) was prepared by the use of potassium persulfate and propanal at 70 °C and various degradation times from 0 to 30 h. These samples were then grafted by maleic anhydride (MA) in toluene solution before modification with 3-amino-1,2,4-triazole (ATA) to produce modified TNRs (AMTNRs). Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) was used to identify the chemical compositions. Carboxyl and hydroxyl groups of TNRs were clearly observed, due to chain scission, oxidation, and modified chain ends. The viscosities of TNRs were dropped greatly after 5 h and then decreased slowly as a function of degradation time. ATR-FTIR spectra of AMTNRs showed amide bonds between ATA and MA groups, and then the multiple hydrogen bonding arrays were formed. The glass transition temperatures (T_g) of AMTNRs were determined by differential scanning calorimetry. The T_g of AMTNR_0 moved to a higher temperature of –55 °C after modification by ATA, confirming the formation of multiple hydrogen bonding arrays. However, the T_g of AMTNR_5 to AMTNR_30 decreased slightly due to chain scission in the degradation process. The adhesive properties of AMTNR-based pressure-sensitive adhesive were evaluated by a Lloyd adhesion tester. The tack of AMTNRs depended on wettability whereas peel and shear strengths were responded by a combination between wettability and multiple hydrogen bonding arrays.     

Contributions of TMAH Surfactant on Hierarchical Structures of PVA/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>–TMAH Ferrogels by Using SAXS Instrument

The magnetic hydrogels combining polyvinyl-alcohol (PVA) and Fe₃O₄ (magnetite)–TMAH (tetra-methyl ammonium hydroxide) have been successfully fabricated via a Freezing-thawing route. The magnetite nanoparticles were prepared from iron sands by using coprecipitation method. The transmission electron microscopy image revealed that the magnetite nanoparticles with a reaction temperature of 30 °C had the average particle size of 12 nm in clusters of aggregation. The result was similar to the particle size obtained from X-ray diffraction data analyzed by Scherer equation. Furthermore, synchrotron small angle X-ray scattering data were analyzed by using two lognormal distributions to calculate the distribution of the individual magnetite particles. Meanwhile, Teubner-Strey and Beaucage models were employed to observe the distribution of magnetite particles coated by TMAH as a surfactant. The data analysis showed that the magnetite particles within the magnetic hydrogels formed aggregations with diameters of cluster particles in the range from 13.1 to 31.8 nm. Interestingly, the diameter of clusters particle increased from 13.1 to 31.8 nm along with the increasing concentration of ferrofluids from 1 to 15 wt%. This phenomenon was predicted to result from the effect of TMAH as a surface reactant agent that prevented the aggregation by coating the surface of the magnetite nanoparticles.     

Effects of Sn4+ doping and oxygen vacancy on magnetic and electrical properties of yttrium iron garnet prepared by sol-gel method

Sn-substituted yttrium iron garnet samples, Y₃Fe_5-xSn_xO₁₂ (x = 0–0.1, step 0.02) were prepared using a citrate sol–gel method and followed by a sintering process. Synchrotron X-ray diffraction (SXRD), X-ray absorption near edge structure (XANES), scanning electron microscope (SEM) and Fourier infrared spectroscopy (FTIR) measurements were used to investigate the structure parameters, valence state of Fe, oxygen vacancies and lattice distortion in the samples. The magnetic properties of the samples were measured with the SQUID and VSM equipments. The Sn substitution and oxygen vacancies cause the transformation of Fe³⁺ to Fe²⁺ which leads to the decrease of Curie temperature and slight increase of saturation magnetization. Temperature dependence of the resistivity in the range of 300–573 K was investigated to elucidate the conduction mechanism in the samples. The resistivity of the sol-gel derived samples was found to be nine orders of magnitudes lower than the value for the bulk sample prepared by flux-grown method. The effects of Fe²⁺ centers, lattice dislocation, porosity and grain boundary on the resistivity are discussed. This study indicates that Sn-substituted yttrium iron garnets are good candidates for sensor elements which operate based on electrical signals.     

Structure–Property–Process Relationship for Blown Films of Bimodal HDPE and Its LLDPE Blend

Blown films of bimodal‐high‐density polyethylene (HDPE) (BPE) and its blend containing 40 wt% of linear low‐density polyethylene (LLDPE) are prepared in various neck‐heights (NHs). The crystal structures of both films are investigated in detail using small‐angle X‐ray scattering and wide‐angle x‐ray diffraction techniques. The results show that the blending of LLDPE notably modifies the crystal structure of BPE, including crystal density (ρ_c), crystallite size of the 110 plane (〈L₁₁₀〉), thickness of the lamellar crystal (L_c), and grain widths of the lamellae. The relationships between NH, crystal structure, and the resistance of dart‐drop impact (DDI) are investigated for both BPE and BPE/LLDPE films. The results indicate that the reorientation of lamellae might be a primary factor responsible for the DDI property. However, large values of ρ_c, L_c, and 〈L₁₁₀〉 are required for the film to achieve high DDI.     

Origin of phase shift in atomic force microscopic investigation of the surface morphology of NR/NBR blend film

Atomic force microscopy (AFM) was used to study the morphology and surface properties of NR/NBR blend. Blends at 1/3, 1/1 and 3/1 weight ratios were prepared in benzene and formed film by casting. AFM phase images of these blends in tapping mode displayed islands in the sea morphology or matrix-dispersed structures. For blend 1/3, NR formed dispersed phase while in blends 1/1 and 3/1 phase inversion was observed. NR showed higher phase shift angle in AFM phase imaging for all blends. This circumstance was governed by adhesion energy hysteresis between the device tip and the rubber surface rather than surface stiffness of the materials, as proved by force distance measurements in the AFM contact mode.     

Interfacial Interactions of Silica and Natural Rubber Enhanced by Hydroxyl Telechelic Natural Rubber as Interfacial Modifier

The incompatibility between hydrophilic silica and hydrophobic rubber is an important problem on using silica in nonpolar rubber. In this study, hydroxyl telechelic natural rubber (HTNR) that contains hydroxyl‐terminated groups was introduced into silica‐reinforced natural rubber (NR) in order to improve the bonding strength between rubber and silica. The properties of silica‐reinforced NR compounds and vulcanizates as a function of varying silica contents were evaluated at a fixed HTNR concentration at 8% wt/wt of silica content. The results show that the improvement of silica dispersion and decreasing of filler–filler interactions (Payne effect) were obtained in the NR compounds and vulcanizates with HTNR addition. The enhancements in tensile properties, crosslink density, abrasion resistance, heat build‐up, and thermal properties of the silica‐reinforced NR vulcanizates with added HTNR confirmed that HTNR performed good as interfacial modifier of silica. In the study, the optimum properties of silica‐reinforced NR vulcanizate were achieved at 30 phr silica with 2.4 phr HTNR. However, HTNR still showed poorer efficiency than the synergy between commercial silane coupling agent, bis [3‐(triethoxysilyl) propyl] tetrasulphide (TESPT) and diphenylguanidine (DPG) when used in silica‐reinforced NR vulcanizate. J. VINYL ADDIT. TECHNOL., 26:291–303, 2020. © 2019 Society of Plastics Engineers     

Daylighting through light pipes in the tropics

Daylighting possesses good potential for application in the tropics, where the sky is luminous. But the depth of penetration of skylight through side windows is limited and can be complemented by sunlighting for illumination of the deeper interior space of a building through light pipes in the ceiling plenum. Modeling of the mechanisms of light delivery and heat transfer will enable trading off between light gain, increased air-conditioning load, and overall system performance and cost. This paper reports the development of such a model based on a general configuration of a plenum in a test room and a comparison of the calculation results with results from physical measurements.     

Removal of ammonia from contaminated air in a biotrickling filter - denitrifying bioreactor combination system

The removal of gaseous ammonia in a system consisting of a biotrickling filter, a denitrification reactor and a polishing bioreactor for the trickling liquid was investigated. The system allowed sustained treatment of ammonia while preventing biological inhibition by accumulating nitrate and nitrite and avoiding generation of contaminated water. All bioreactors were packed with cattle bone composite ceramics, a porous support with a large interfacial area. Excellent removal of ammonia gas was obtained. The critical loading ranged from 60 to 120 gm(-3)h(-1) depending on the conditions, and loadings below 56 gm(-3)h(-1) resulted in essentially complete removal of ammonia. In addition, concentrations of ammonia, nitrite, nitrate and COD in the recycle liquid of the inlet and outlet of each reactor were measured to determine the fate of nitrogen in the reactor, close nitrogen balances and calculate nitrogen to COD ratios. Ammonia absorption and nitrification occurred in the biotrickling filter; nitrate and nitrite were biologically removed in the denitrification reactor and excess dissolved COD and ammonia were treated in the polishing bioreactor. Overall, ammonia gas was very successfully removed in the bioreactor system and steady state operation with respect to nitrogen species was achieved.