Using Markov Learning Utilization Model for Resource Allocation in Cloud of Thing Network

Wireless Personal Communications - The integration of the Internet of Things (IoT) and cloud environment has led to the creation of Cloud of Things, which has given rise to new challenges in IoT...     

Morphological evolution on the surface of hydrothermally synthesized hydroxyapatite microspheres in the presence of EDTMP

Well-ordered and surface engineered hierarchical hydroxyapatite microspheres (HAM) were prepared via a template free hydrothermal process. Ethylene diamine tetra (methylene phosphonic acid) (EDTMP) was used as chelating or regulating agent for the first time in this study. The results indicated the formation of sheet-like particles in the absence of EDTMP. On the other hand, microspheres with radially grown nanorods (HAMNR) or nanosheets (HAMNS) on the surface were obtained (with average diameter of 5?µm) in the presence of EDTMP. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy were used to characterize the crystalline phases in the synthesized samples. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed that EDTMP concentration played an important part in regulating the morphology to form well organized microspheres with nanosheets or nanorods on the surface. Brunauer-Emmett-Teller (BET) revealed an increase in the specific surface area with the change in morphology from the HAMNS to HAMNR. Possible mechanisms are proposed to account for the formation of different morphologies based upon thermodynamic and kinetic theories.     

Preparation of superconducting YBa2Cu3O7−x powders by a solution technique

Bulk superconducting YBa₂Cu₃O_7–x powder has been synthesized by a solution technique using a mixture of Ba-ethylenediaminetetra-acetic acid (EDTA) and [Y, Cu]-citric acid complexes. A light-blue, molecular-level, homogeneously mixed precursor was prepared, and transferred to powder form through vacuum drying. The vacuum-dried powder was decomposed at 800 °C for 4 h under flowing oxygen, then heat treated at high temperature from 850 to 950 °C for 6–12 h. The results ofT _c measurements and X-ray analysis show that the orthorhombic, superconducting phase can be formed at temperatures above 850 °C following low-temperature annealing. A sharp transition (T2 K) and high density can be achieved after 930 °C heat treatment. The 930 °C heat treated sample shows aJ _c value of 510 A cm^–2. It is concluded that this solution technique provides better stoichiometric control and lower reaction temperature than the conventional solid-state sintering process.     

GSAGA: A hybrid algorithm for task scheduling in cloud infrastructure

Cloud computing is becoming a very popular form of distributed computing, in which digital resources are shared via the Internet. The user is provided with an overview of many available resources. Cloud providers want to get the most out of their resources, and users are inclined to pay less for better performance. Task scheduling is one of the most important aspects of cloud computing. In order to achieve high performance from cloud computing systems, tasks need to be scheduled for processing by appropriate computing resources. The large search space of this issue makes it an NP-hard problem, and more random search methods are required to solve this problem. Multiple solutions have been proposed with several algorithms to solve this problem until now. This paper presents a hybrid algorithm called GSAGA to solve the Task Scheduling Problem (TSP) in cloud computing. Although it has a high ability to search the problem space, the Genetic Algorithm (GA) performs poorly in terms of stability and local search. It is therefore possible to create a stable algorithm by combining the general search capacities of the GA with the Gravitational Search Algorithm (GSA). Our experimental results indicate that the proposed algorithm can solve the problem with higher efficiency compared with the state-of-the-art.

     

Hot Corrosion Behavior and Microstructural Change of Al-Gradient CoNiCrAlYSi Coatings, Produced by LVPS and Diffusional Processes

Conventional and gradient CoNiCrAlYSi coatings were produced by using low vacuum plasma spray and an additional step of diffusional over aluminizing (pack cementation) techniques on an Inconel-738 substrate. Hot corrosion of these coatings was investigated using Na₂SO₄–20wt%NaVO₃ molten salt at 880?°C for 800?h. Hot corrosion rate was determined by measuring the weight gain of the specimens at regular intervals for a duration of 20?h. X-ray diffraction, field emission scanning electron microscopy and electron probe micro analysis techniques were used to determine the nature of phases, investigation of the thermally grown oxide, examination of the surface attack and determination of the elemental distribution. The gradient coating showed better performance by re-healing alumina scale due to its possession of more β phase as Al reservoir. Results indicated that pack cementation process caused an increase in amount of aluminum-rich β phase and better hot corrosion properties of gradient coatings owing to the Al enrichment in the outer layer and rapid formation of protective oxide on the surface.     

Investigation of local thermal nonequilibrium effects on oil in situ combustion simulation

In the models developed for oil in situ combustion so far, local thermal equilibrium (LTE) was assumed between reservoir rock and fluids without being validated. As presence of a combustion zone makes the validation of this assumption questionable, in this study a new two-energy equations model is developed describing the temperature fields of rock and fluids separately. Investigating the effect of local thermal nonequilibrium between rock and fluids indicates that LTE will fail if the grain's diameter size order exceeds a millimeter. In this case, using LTE will lead to overestimating the heat and mass transfer rates.     

Compressive and flexural properties of novel polylactic acid/hydroxyapatite/yttria-stabilized zirconia hybrid nanocomposite scaffold

The mechanical property is a crucial factor in the design of bone tissue engineering scaffolds. In the current study, novel PLLA (Poly-L-lactic acid)–Hydroxyapatite (HA)–yttria-stabilized zirconia (YSZ) nanocomposite scaffold with various compositions was prepared and characterized. The effect of HA and YSZ contents on the mechanical behavior of the resultant composites was investigated. TEM micrograph revealed that HA particles are needle-like in shape and nano in size. Scanning electron microscopy (SEM) micrograph also showed that YSZ powder is in granule form and submicron size. SEM disclosed that all scaffolds had a highly interconnected porous structure and X-ray diffractometry revealed that there were some molecular interactions between PLA (Polylactic acid), HA, and YSZ in the composites. The results depicted that introducing YSZ to the nanocomposite leads to a significant increase in compressive strength, modulus, and densification strain. In addition, flexural strength and modulus showed an upward trend by adding YSZ particles to scaffolds. It should be noted that PLA–20%HA–20%YSZ indicates the highest strength and modulus in both compression and bending tests, though, it did not demonstrate the proper strain compared to other scaffolds. Thus, PLA–15%HA–15%YSZ has been reported as the best candidate due to appropriate strength and strain. Also, energy absorption in nanocomposites showed an upward trend by increasing the amount of YSZ particles. It was found that the strength of samples was declined after being soaked in simulated body fluid. However, scaffolds with HA underwent more decrease in strength compared to samples containing YSZ.