Natural rubber-graft-poly(2-hydroxyethyl acrylate) on cure characteristics and mechanical properties of silica-filled natural rubber composites

The grafting of poly(2-hydroxyethyl acrylate) onto natural rubber (NR-g-PHEA) was used to compatibilize NR composites with silica filler. The NR/silica compounds were prepared with various grafting percentages of NR-g-PHEA (0, 6.5, 10.5, and 14.5%) and fixed amounts of 3 parts per hundred of rubber (phr) NR-g-PHEA and 20 phr silica. The cure characteristics were examined using a moving die rheometer. The physicomechanical properties of NR/silica composites were determined in terms of tensile strength, bound rubber content, and dynamic mechanical analysis. Thermal properties were assessed with thermogravimetric analysis. The results showed that scorch time and cure time tend to decrease with the level of grafting in NR-g-PHEA. The NR-g-PHEA decreased tan δ, whereas bound rubber content in NR/silica compounds increased, which indicates improved silica dispersion in the NR matrix. The mechanical properties improved with level of grafting in NR-g-PHEA. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48738.     

Mechanical,thermal, morphological,and curing properties of geopolymer filled natural rubber composites

The main objective of this work was to investigate influence of natural rubber (NR) types on mechanical, thermal, morphological, and curing properties together with relaxation behavior of geopolymer filled NR composites with and without bis(triethoxysilylpropyl) tetrasulfide (TESPT) silane coupling agent. Three alternative types of NR: unmodified NR, and epoxidized NR with 25 (ENR-25) or 50 mol % epoxide (ENR-50) were exploited. Rubber compounds filled with GP particles were prepared in an internal mixer at 60 °C and 130–150 °C for the ones with and without TESPT, respectively. It was found that incorporation of GP significantly affected cure characteristics and mechanical properties of the rubber composites. That is, decreasing cure time was observed from 11.6, 3.2, and 7.0 min in gum NR, ENR-25, and ENR-50 to 6.9, 2.1, and 5.0 min in NR/GP, ENR-25/GP, and ENR-50/GP compounds, respectively. Furthermore, the ENR-25/GP and ENR-50/GP composites showed finely dispersed GP particles which indicate high filler–rubber interactions. The in situ silanization with TESPT in rubber composites enhanced the mechanical properties of NR/GP and ENR-25/GP composites but no such enhancement was found in the ENR-50/GP composite. This matched the observations of Payne effect, maximum tan δ, and stress relaxation properties of the composites. We found that the ENR-25/GP composites exhibited the best overall properties. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47346.     

Thermoplastic elastomers-based natural rubber and thermoplastic polyurethane blends

Thermoplastic elastomers based on the blends of thermoplastic polyurethane (TPU) and natural rubber were prepared by a simple blend technique. The influence of the two different types of natural rubber (i.e., unmodified natural rubber (NR) and epoxidized natural rubber (ENR)) on properties of the blends was investigated. The main aim of this study was to improve heat resistance and damping properties, and also to prepare the TPU material with low hardness by blending with various amounts of natural rubber. It was found that the TPU/ENR blends exhibited superior modulus, hardness, shear viscosity, stress relaxation behavior and heat-resistant properties compared to the blends with TPU and unmodified NR. This was attributed to higher chemical interaction between the polar functional groups of ENR and TPU by improving the interfacial adhesion. It was also found that the ENR/TPU blends exhibited finer grain morphology than the blends with unmodified NR. Furthermore, lower tension set, damping factor (Tan ??) and hardness, but higher degradation temperature, were observed in natural rubber/TPU blends compared to pure TPU. This proves the formation of TPU material with high heat resistance, low hardness and better damping properties. However, the blends with higher proportion of natural rubber exhibited lower tensile strength and elongation at break.     

Effect of carbon nanotubes decorated with silver nanoparticles as hybrid filler on properties of natural rubber nanocomposites

Decoration of carbon nanotube (CNT) surfaces with silver nanoparticles (AgNPs) was performed using N,N-dimethylformamide reducing agent. The CNT-decorated with AgNP (CNT-AgNP) was then used to prepare natural rubber (NR) nanocomposites via latex mixing method. Cure characteristics, mechano-thermal relaxation, electrical conductivity, and thermal properties of the composites were investigated. It was found that the CNT-AgNP gave cure properties improved over plain NR compounds in terms of scorch time, degree of vulcanization, and activation energy. In addition, temperature scanning stress relaxation measurement revealed stronger network formation after incorporation of AgNP into the NR matrix due to the interaction among CNT and AgNP particles. This also provided high conductivity and low percolation threshold concentration for the CNT-AgNP filled NR, relative to plain CNT filled NR composites. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47281.     

Novel ternary blends of natural rubber/linear low-density polyethylene/thermoplastic starch: influence of epoxide level of epoxidized natural rubber on blend properties

Novel degradable materials based on ternary blends of natural rubber (NR)/linear low-density polyethylene (LLDPE)/thermoplastic starch (TPS) were prepared via simple blending technique using three different types of natural rubber (i.e., unmodified natural rubber (RSS#3) and ENR with 25 and 50 mol% epoxide). The evolution of co-continuous phase morphology was first clarified for 50/50: NR/LLDPE blend. Then, 10 wt% of TPS was added to form 50/40/10: NR/LLDPE/TPS ternary blend, where TPS was the particulate dispersed phase in the NR/LLDPE matrix. The smallest TPS particles were observed in the ENR-50/LLDPE blend. This might be attributed to the chemical interactions of polar functional groups in ENR and TPS that enhanced their interfacial adhesion. We found that ternary blend of ENR-50/LLDPE/TPS exhibited higher 100 % modulus, tensile strength, hardness, storage modulus, complex viscosity and thermal properties compared with those of ENR-25/LLDPE/TPS and RSS#3/LLDPE/TPS ternary blends. Furthermore, lower melting temperature (T _m) and heat of crystallization of LLDPE (?H) were observed in ternary blend of ENR-50/LLDPE/TPS compared to the other ternary blends. Also, neat TPS exhibited the fastest biodegradation by weight loss during burial in soil for 2 or 6 months, while the ternary blends of NR/LLDPE/TPS exhibited higher weight loss compared to the neat NR and LLDPE. The lower weight loss of the ternary blends with ENR was likely due to the stronger chemical interfacial interactions. This proved that the blend with ENR had lower biodegradability than the blend with unmodified NR.     

Role of geopolymer as a cure activator in sulfur vulcanization of epoxidized natural rubber

Geopolymer (GP) was synthesized and used as activators in sulfur vulcanization of epoxidized natural rubber (ENR). Influences of GP on cure characteristics, crosslink density, mechanical, thermal, and morphological properties were investigated and compared to the conventional rubber formulation with ZnO activator. The ZnO is a hazardous chemical for the environment and has proclaimed that its application in rubber technology should be reduced and controlled. It was found that the GP-activated ENR compounds showed significantly higher vulcanization rate than cases with the conventional ZnO compound. This was indicated by the GP activated compounds having shorter scorch time, cure times, and lower activation energy but higher cure rate index (CRI). Also, the GP activated ENR compounded with stearic acid exhibited the highest conversion. This matches well the highest torque difference and crosslink density, observed by temperature scanning stress relaxation (TSSR) and swelling measurements. Furthermore, the GP-activated vulcanizate had better thermal stability than the ZnO-activated ENR material. In addition, the GP-activated ENR vulcanizate with stearic acid exhibited high 100% moduli, tensile strength, and hardness. This proves that GP has a high potential for use as activators in sulfur vulcanization of rubber compounds, as an alternative to the conventional ZnO. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48624.     

Optimizing mechanical and morphological properties of biodegradable thermoplastic elastomer based on epoxidized natural rubber and poly(butylene succinate) blends

Biodegradable thermoplastic elastomer (BTPE) blends of epoxidized natural rubber (ENR) and poly(butylene succinate) (PBS) were prepared by the melt mixing process. Influences of the processing parameters mixing temperature, rotor speed, and mixing time on mechanical and morphological properties of BTPE were investigated. Taguchi method was applied to improve the mechanical and morphological properties by optimizing the processing parameters. That is, the experimental design adopted the L9 Taguchi orthogonal array with three manipulated factors (i.e., mixing temperature, rotor speed, and mixing time). Analysis of mean and analysis of variance were also exploited and the mixing temperature was found to be the most significant processing parameter regarding mechanical properties. The mixing temperature showed large contributions to Young's modulus, 100% modulus, tensile strength, and elongation at break, namely 45.33, 40.38, 49.31, and 36.04%, respectively. Furthermore, the optimum conditions found for mixing temperature, rotor speed, and mixing time were 140 °C, 100 rpm and 10 min, respectively. The result was confirmed by atomic force microscopy and scanning electron microscopy micrographs showing fine‐grained co‐continuous phase morphology of the ENR/PBS blends. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46541.