An element-based formulation for ES-FEM and FS-FEM models for implementation in standard solid mechanics finite element codes for 2D and 3D static analysis

Edge-based and face-based smoothed finite element methods (ES-FEM and FS-FEM, respectively) are modified versions of the finite element method allowing to achieve more accurate results and to reduce sensitivity to mesh distortion, at least for linear elements. These properties make the two methods very attractive. However, their implementation in a standard finite element code is nontrivial because it requires heavy and extensive modifications to the code architecture. In this article, we present an element-based formulation of ES-FEM and FS-FEM methods allowing to implement the two methods in a standard finite element code with no modifications to its architecture. Moreover, the element-based formulation permits to easily manage any type of element, especially in 3D models where, to the best of the authors' knowledge, only tetrahedral elements are used in FS-FEM applications found in the literature. Shape functions for non-simplex 3D elements are proposed in order to apply FS-FEM to any standard finite element.     

Fatty acids,sterols, and tocopherols composition in seed oil extracts from four moroccan ecotypes of Ceratonia siliqua L.

Morphological characterization was investigated by agro-morphological criteria related to carob seed size in four different moroccan regions collected in 2018 and 2019. There was no significant difference (p ≤ 0.05) on the seeds lengths and widths. However, a significant difference between seeds thickness and total seeds weight per pod (p ≤ 0.05) were observed between these four populations. The fatty acid, sterol, tocopherol, hydrocarbon, and the unoxygenated composition of carob seed extracts (Ceratonia siliqua L.) were studied. The mean fat yield of the seeds obtained is 1.53%–2.17%, 2.14%–2.15%, 1.61%–1.62%, 1.71%–1.75% for, respectively, the P1 (Meknes), P2 (Fez), P3 (Khemisset), and P4 (Marrakech) in 2018 and 2019. The seed oil was extracted with hexane and the analysis of the fatty fraction was performed by gas chromatography–mass spectrometry (GC–MS). Results show that the major fatty acids for 2018 and 2019 are linoleic acid (61.48%–61.52%, 52.12%–52.14%, 57.76%–58.15%, 61.33%–61.52%), palmitic acid (15.78%–15.81%, 16.44%–16.45%, 19.11%–18.37%, 20.24%–20.32%), oleic acid (11.03%–11.04%, 8.72%–8.82%, 8.51%–8.61%, 8.41%–8.53%), stearic acid (4.35%–3.14%, 5.40%–5.43%, 3.12%–3.13%, 0.96%–1.56%), and cerotic acid (0.62%–0.53%, 4.51%–4.52%, 4.03%–4.06%, 3.84%–3.87%). The unsaturated fatty acids (69.39% in 2018 and 69.68% in 2019) are the most dominant in the four seed extracts compared to the saturated fatty acids. In addition, the oil carob seeds analysis revealed the presence of γ-tocopherol, α-tocopherol and four sterols that included campesterol, stigmasterol, and β-sitosterol. Moreover, the determination of hydrocarbon and un-oxygenated compounds confirmed the existence of major compounds such as heptadecane, 2-methyltriacontane, 1-iodo hexadecane and 1-iodo octadecane. The hierarchical analysis based on the morphological and chromatographic characterization of the seeds allowed the identification of three groups. Consequently, the first group consisted of populations from Marrakesh (P4) and Khemisset (P3), the second group consisted of the P1 from Meknes, and the P2 from Fez constituted the third group.     

Optimization of nutrient-induced germination of Bacillus sporothermodurans spores using response surface methodology

Spores of Bacillus sporothermodurans are known to be contaminant of dairy products and to be extremely heat-resistant. The induction of endospore germination before a heat treatment could be an efficient method to inactivate these bacteria and ensure milk stability. In this study, the nutrient-induced germination of B. sporothermodurans LTIS27 spores was studied. Testing the effect of 23 nutrient elements to trigger an important germination rate of B. sporothermodurans spores, only d-glucose, l-alanine, and inosine were considered as strong independent germinants. Both inosine and l-alanine play major roles as co-germinants with several other amino acids. A central composite experimental design with three factors (l-alanine, d-glucose, and temperature) using response surface methodology was used to optimize the nutrient-induced germination. The optimal rate of nutrient-induced germination (100%) of B. sporothermodurans spores was obtained after incubation of spore for 60 min at 35 °C in presence of 9 and 60 mM of d-glucose and l-alanine, respectively. The results in this study can help to predict the effect of environmental factors and nutrients on spore germination, which will be beneficial for screening of B. sporothermodurans in milk after induction their germination. Moreover, the chosen method of optimization of the nutrient-induced germination was efficient in finding the optimum values of three factors.     

Study of the Mechanical Properties of Fibers Extracted from Tunisian Agave americana L.

Agave americana L. fibers, the most abundant variety in Tunisia, have a quite important textile potential. This potential is demonstrated by studying the extraction of these fibers from leaves, their physical properties such us fineness or density and their mechanical behavior in tensile tests. In this work, results of a mechanical behavior study of fibers extracted from the Agave americana L. plant are presented. These results deal with the principal and mechanical characteristics of these fibers which are the strain at break, the elasticity modulus and the rupture facture. These results permitted to situate these fibers, compared to the other textile fibers, as materials that can be used in technical applications such as reinforcing composites or geotextile. In order to understand the mechanical properties of these fibers, a correlation study between the properties already cited and the fine structure was done. The obtained results showed that the mechanical properties of Agave americana L. fibers are closely related to the individual fibers deformations and to the natural matrix (lignin and gums) that are linked to these elementary fibers.     

Study of the removal of mercury(II) and chromium(VI) from aqueous solutions by Moroccan stevensite

The objective of the present study was to investigate the adsorption of the heavy metals mercury(II) and chromium(VI), from aqueous solutions, onto Moroccan stevensite. A mineralogical and physicochemical characterization of natural stevensite was carried out. In order to improve the adsorption capacity of stevensite for Cr(VI), a preparation of stevensite was carried out. It consists in saturating the stevensite by ferrous iron Fe(II) and reducing the total Fe by Na(2)S(2)O(4). Then, the adsorption experiments were studied in batch reactors at 25+/-3 degrees C. The influence of the pH solution on the Cr(VI) and Hg(II) adsorption was studied in the pH range of 1.5-7.0. The optimum pH for the Cr(VI) adsorption is in the pH range of 2.0-5.0 while that of Hg(II) is at the pH values above 4.0. The adsorption kinetics were tested by a pseudo-second-order model. The adsorption rate of Hg(II) is 54.35 mmol kg(-1)min(-1) and that of Cr(VI) is 7.21 mmol kg(-1)min(-1). The adsorption equilibrium time for Hg(II) and Cr(VI) was reached within 2 and 12 h, respectively. The adsorption isotherms were described by the Dubinin-Radushkevich model. The maximal adsorption capacity for Cr(VI) increases from 13.7 (raw stevensite) to 48.86 mmol kg(-1) (modified stevensite) while that of Hg(II) decreases from 205.8 to 166.9 mmol kg(-1). The mechanism of Hg(II) and Cr(VI) adsorption was discussed.     

Improvement of paint effluents coagulation using natural and synthetic coagulant aids

The coagulant iron chloride and the flocculants Polysep 3000 (PO), Superfloc A-1820 (SU) and Praestol 2515 TR (PR) have been used in this study to show the efficiency of coagulation flocculation process in the chemical precipitation method for the removal of organic and colouring matters from the paint industry wastewater. This study also includes the amount of produced sludge. The results indicate that FeCl(3) is efficient at pH range 8-9 and at optimal dose of 650 mgl(-1). Iron chloride allows the removal of 82% of chemical oxygen demand (COD) and 94% of colour. However, sequential addition of coagulant and polymeric additives enhance clearly pollutant removal and produces less decanted sludge compared to the results obtained when the coagulant is used alone. The removal efficiency of COD reaches 91% and that of colour 99%. Coagulation-biflocculation process is more effective than the coagulation-monoflocculation one. The sequential addition of iron chloride, Polysep 3000 (cationic flocculant) and Praestol 2515 TR (anionic flocculant) seems to be the most suitable combination for the treatment of the paint industry wastewaters.     

Rapid decolourization and mineralization of the azo dye C.I. Acid Red 14 by heterogeneous Fenton reaction

The decolourization and mineralization of a solution of an azo dye using a catalyst based on Fe(II) supported on Y Zeolite (Fe(II)-Y Zeolite) and adding hydrogen peroxide (heterogeneous Fenton process) have been studied. The catalyst was prepared by ion exchange, starting from a commercial ultra-stable Y Zeolite. All experiments were performed on a laboratory scale set-up. The effects of different parameters such as initial concentration of the dye, initial pH of the solution of the dye, H(2)O(2) concentration, temperature and ratio of amount of catalyst by amount of solution on the decolourization efficiency of the process were investigated. A percentage of colour removal of 99.3±0.2% and a mineralization degree of 84±5% of the solution of the dye were achieved in only 6 min of contact time between the catalyst and the solution, under the following conditions: initial concentration of the dye of 50 ppm, pH 5.96, 8.7 mM of H(2)O(2), T of 80°C and catalyst concentration of 15 g/L. Moreover, the catalyst Fe(II)-Y Zeolite can be easily filtered from the solution, does not leach any iron into the solution (avoiding any secondary contamination due to the metal) and its effectivity can be reproduced after consecutive experiments.     

Discoloration of a red cationic dye by supported TiO(2) photocatalysis

The degradation under UV, visible and sunlight irradiation of C.I. Basic Red 46 (BR 46) dye used for acrylic fibers dyeing has been studied in a lab-scale continuous system with two different immobilized TiO(2) systems. Catalyst I was based on TiO(2) particles deposited on cellulose fibers; Catalyst II combined TiO(2) particles deposited on a layer of cellulose fibers (as in Catalyst I) with a layer of carbon fibers and finally a layer of cellulose fibers. The treatment of aqueous dye solutions and industrial wastewater contaminated with the same dye has been evaluated in terms of color removal and chemical oxygen demand (COD) decrease. With UV light, aqueous solutions containing dye were decolorized slightly more rapidly with Catalyst II than with Catalyst I. Sunlight was also very effective and experiments involving sunlight irradiation showed Catalyst II to be the more efficient, giving more than 90% discoloration after 20 min of treatment. Comparing the discoloration yield by adsorption or under visible light for both catalysts, it was observed that the difference between them is below 5%. The adsorption kinetics was found to follow a second-order rate law for Catalyst I and a first-order rate law for Catalyst II. The kinetics of photocatalytic degradation under UV or sunlight were found to follow a first-order rate law for both catalytic systems. Under sunlight the COD removal yield for textile wastewater reaches 33% with Catalyst I against 93% with Catalyst II.