Performance of combined cobalt—nickel—zirconia and HZSM-5 catalyst systems for carbon monoxide hydrogenation

The synthesis of hydrocarbons via hydrogenation of carbon monoxide was investigated over cobalt—nickel—zirconia catalysts of various compositions in combination with zeolite HZSM-5 in “mixed bed” and “follow bed” arrangements. These combinations resulted in the formation of aromatics in amounts as high as 30-35 wt% under relatively mild operating conditions (1 atm, 250–280°C). Although the olefinicity of C₂ and C₃ fractions in the product stream was higher in the mixed bed compared to the follow bed arrangement, the selectivities to aromatics were comparable in the two bed arrangements. The aromatic selectivity was found to be sensitive to operating conditions. The formation of aromatics was favored at high HZSM-5/metal catalyst ratios, low space velocities and high reaction temperatures. The product distributions obtained using various metal/zeolite bifunctional catalysts have been discussed.     

Upgrading of aspen poplar wood oil over HZSM-5 zeolite catalyst

Thermally fractionated components of an oil prepared by the liquefaction of aspen poplar wood have been upgraded using a HZSM-5 zeolite catalyst to yield products rich in benzene, toluene, xylenes and higher molecular weight aromatics. The effect of reactor temperatures on the relative abundance of these products has been studied.     

Degradation of junction leakage in devices subjected to gateoxidation in nitrous oxide [MOS transistors]

Nitrided gate oxides offer several electrical and reliability advantages over conventional oxides and also provide a good barrier against impurity diffusion. Oxidation in nitrous oxide (N₂O) has been very successful in overcoming some of the problems associated with nitridation in ammonia. The authors have observed that the extent of N₂O oxidation has a strong detrimental effect on the drain leakage current of MOS transistors in the off state. This phenomenon has been identified to be caused by an increase in the active area junction leakage current     

Ultrathin oxide-nitride dielectrics for rugged stacked DRAMcapacitors

Ultrathin dielectric materials that provide high capacitance values are needed for 64- and 256-Mb stacked DRAMs. It is shown that capacitance values as high as 12.3 fF/μm² can be obtained with ultrathin nitride-based layers deposited on rugged polysilicon storage electrodes. These films present the reliability and low leakage current levels required for 3.3-V applications. The nitride thickness, however, cannot be scaled much below 6 nm to avoid the oxidation-punchthrough mechanisms that appear when too-thin films are unable to withstand the reoxidation step     

Distal femoral osteotomy for lateral compartment osteoarthritis of the knee

Arachidonic acid (AA) in the diet can be efficiently absorbed and incorporated into tissue membranes, resulting in an increased production of thromboxane A2 by platelets and increased ex vivo platelet aggregability. Results from previous studies have shown that AA is concentrated in the membrane phospholipids of lean meats. However, the concentration of AA in the visible fat portion of meats also may be significant despite being ignored in most studies. The aim of this study was to accurately quantitate the AA content of visible fat and the lean portion of beef, lamb, pork, chicken, duck, and turkey. The visible fat of meat contained a significant quantity of AA, ranging from 20 to 180 mg/100 g fat, whereas the AA content of the lean portion of meat was lower, ranging from 30 to 99 mg/100 g lean meat. Beef and lamb meats contained lower levels of AA in both the visible fat and lean portion than that from the other species. The highest level of AA in lean meat was in duck (99 mg/100 g), whereas pork fat had the highest concentration for the visible fats (180 mg/100 g). The lean portions of beef and lamb contained the higher levels of n-3 polyunsaturated fatty acids (PUFA) compared with white meats which were high in AA and low in n-3 PUFA. The present data indicate that the visible meat fat can make a contribution to dietary intake of AA, particularly for consumers with high intakes of fat from pork or poultry meat.     

Fully aliphatic polyimides from adamantane‐based diamines for enhanced thermal stability,solubility, transparency,and low dielectric constant

We have synthesized a series of fully aliphatic polyimides (APIs) from bicyclo[2,2,2]oct‐7‐ene‐2,3,5,6‐tetracarboxylic dianhydride (BOCA) and various aliphatic diamines, including linear aliphatic, flexible alicyclic, and rigid adamantyl diamines. We performed the polymerization reactions using one‐step syntheses in m‐cresol at elevated temperatures without the isolation of poly(amic) acid. The chemical composition and structure of the polymers were characterized by nuclear magnetic resonance (NMR) and infrared (IR) spectrometry. The characterization data are reported from analyses using gel permeation chromatography (GPC), thermogravimetric analysis (TGA), differential scanning calorimeter (DSC), and wide‐angle X‐ray diffraction (WXAD) measurements. The polyimides are also subjected to solubility, solution viscosity, tensile strength, transparency, and dielectric constant measurements. The resultant polyimides possess well‐controlled molecular weight, reasonable intrinsic viscosity, good transparency, enhanced solubility, low dielectric constants, and high glass transition temperature, together with marginal thermal and mechanical stability. These properties were enhanced in copolyimides containing equimolar amounts of rigid and flexible moieties. These rigid‐rod APIs derived from the alicyclic dianhydride and aliphatic diamines are promising candidates as advanced materials for future applications in micro‐ and photoelectronic devices. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3316–3326, 2006     

Analytical error analysis of Clifford gates by the fault-path tracer method

We estimate the success probability of quantum protocols composed of Clifford operations in the presence of Pauli errors. Our method is derived from the fault-point formalism previously used to determine the success rate of low-distance error correction codes. Here we apply it to a wider range of quantum protocols and identify circuit structures that allow for efficient calculation of the exact success probability and even the final distribution of output states. As examples, we apply our method to the Bernstein–Vazirani algorithm and the Steane [[7,1,3]] quantum error correction code and compare the results to Monte Carlo simulations.