Boundary element analysis of thermal stress intensity factors for interface griffith and cusp cracks

The thermal stress intensity factors for interface cracks of Griffith and symmetric lip cusp types under vertical uniform heat flow in a finite body are calculated by the boundary element method. The boundary conditions on the crack surfaces are insulated or fixed to constant temperature. The relationship between the stress intensity factors and the displacements on the nodal point of a crack-tip element is derived. The numerical values of the thermal stress intensity factors for an interface Griffith crack in an infinite body are compared with the previous solutions. The thermal stress intensity factors for a symmetric lip cusp interface crack in a finite body are calculated with respect to various effective crack lengths, configuration parameters, material property ratios and the thermal boundary conditions on the crack surfaces. Under the same outer boundary conditions, there are no appreciable differences in the distribution of thermal stress intensity factors with respect to each material property. However, the effect of crack surface thermal boundary conditions on the thermal stress intensity factors is considerable.     

Prediction and quality control of the melt index during production of high-density polyethylene

In polyolefin processes the melt index (MI) is the most important control variable indicating product quality. Because of the difficulty in the on-line measurement of MI, a lot of MI estimation and correlation methods have been proposed. In this work a new dynamic MI estimation scheme is developed based on system identification techniques. The empirical MI estimation equation proposed in the present study is derived from the 1 ^st -order dynamic models. Effectiveness of the present estimation scheme was illustrated by numerical simulations based on plant operation data including grade change operations in high density polyethylene (HDPE) processes. From the comparisons with other estimation methods it was found that the proposed estimation scheme showed better performance in MI predictions. The virtual sensor model developed based on the estimation scheme was combined with the virtual on-line analyzer (VOA) to give a quality control system to be implemented in the actual HDPE plant. From the application of the present control system, significant reduction of transition time and the amount of off-spec during grade changes was achieved     

Improved accuracy of burn wound assessment using laser Doppler

The utility of the laser Doppler for determining burn depth has been questioned because of problems with technology and methodology. This study prospectively evaluates the ability of a new laser Doppler technique to predict burn healing time. Using the Periflux System 4000 laser Doppler, readings were taken on 305 burns (147 patients) on postburn day 3 or 4. Sixty-six wounds were used to derive a predictive function (phase I) and 152 wounds were used to test the function (phase II). Blood flow dynamics (flux), microvascular dilation capacity of the wounds to beat stress, and flow motion wave pattern (vasomotion) were studied using the laser Doppler, and seven parameters were evaluated to determine their relative contribution to the prediction of healing time. These parameters are hyperemic flux (flux value after heating to 42 degrees C), average hyperemic wave amplitude (AHWA), number of average flux units >100(F100), number readings with wave amplitude 75 (A5), average flux change (AFC), percentage of average flux increase, and relative flow capacity (RFC = AFC/average hyperemic flux). After readings were made, the wounds were observed and divided into two groups: those that healed in less than 14 days and those that healed or were grafted after 14 days. A step-wise discriminant analysis was used to assess the relative contribution of the Doppler-derived measures to healing time prediction. AHWA, F100, and RFC were included in the final discriminant function explaining 72% of the healing time variance (Wilks' lambda value 0.28; p value <0.0001). Predicted outcome = 0.05(AHWA) + 0.31(F100) + 5.0(RFC) - 2.3. With this derived function, there is 94% accuracy in the prediction of burn wound healing time compared with a physician predictive accuracy of 70%.     

Fabrication of high current and low profile micromachined inductorwith laminated Ni/Fe core

A new process for the fabrication of high current and very low profile micromachined inductors has been developed. This process involves the combination of mechanical lamination and electrodeposition of copper windings by means of LIGA-like lithography through thick epoxy photoresists. The dimension of the fabricated inductor is 16 mm×19 mm×1 mm. The fabricated inductor has an inductance value of 1.2 μH with DC saturation current of 3 A and an electrical resistance of less than 30 mΩ at 10 kHz     

掺杂铁电纳米粉的液晶的电光特性

铁电纳米粒子悬浮在向列相液晶母体中，增强介电各向异性，而且对施加的电场信号敏感。本文也展示了纳米粒子对所述复合材料可实现的总的相变的作用。这种方法也许可应用于设计新型显示材料。     

Trenched‐Sinker LDMOSFET (TS‐LDMOS) Structure for 2 GHz Power Amplifiers

This paper proposes a new LDMOSFET structure with a trenched sinker for high‐power RF amplifiers. Using a low‐temperature, deep‐trench technology, we succeeded in drastically shrinking the sinker area to one‐third the size of the conventional diffusion‐type structure. The RF performance of the proposed device with a channel width of 5 mm showed a small signal gain of 16.5 dB and a maximum peak power of 32 dBm with a power‐added efficiency of 25% at 2 GHz. Furthermore, the trench sinker, which was applied to the guard ring to suppress coupling between inductors, showed an excellent blocking performance below ?40 dB at a frequency of up to 20 GHz. These results confirm that the proposed trenched sinker should be an effective technology both as a compact sinker for RF power devices and as a guard ring against coupling.