Large deformation analysis in the context of 3D compressible nonlinear elasticity using the VDQ method

In this article, a new solution approach is developed to numerically compute large deformations of 3D hyperelastic solids based on the compressible nonlinear elasticity. The governing equations are derived by the minimum total potential energy principle, and the Neo-Hookean model is used for the hyperelastic character of material. One of the key novelties of the work is its formulation in which the tensor form of equations is replaced by an efficient matrix–vector form that can be readily utilized in the coding process. Moreover, the variational differential quadrature technique is adopted to arrive at the discretized governing equations in a direct way. Simple implementation, fast convergence rate, and computational efficiency are the main advantages of present approach. Through some examples, the accuracy and effectiveness of the proposed numerical approach are revealed.

     

Investigation of effective dimensionless numbers on initiation of instability in combustion of moisty organic dust简

In this work, the effect of various effective dimensionless numbers and moisture contents on initiation of instability in combustion of moisty organic dust is calculated. To have reliable model, effect of thermal radiation is taken into account. One- dimensional flame structure is divided into three zones： preheat zone, reaction zone and post-flame zone. To investigate pulsating characteristics of flame, governing equations are rewritten in dimensionless space-time （（, r/, ~） coordinates. By solving these newly achieved governing equations and combining them, which is completely discussed in body of article, a new expression is obtained. By solving this equation, it is possible to predict initiation of instability in organic dust flame. According to the obtained results by increasing Lewis number, threshold of instability happens sooner. On the other hand, pulsating is postponed by increasing Damk6hler number, pyrolysis temperature or moisture content. Also, by considering thermal radiation effect, burning velocity predicted by our model is closer to experimental results.     

Mechanism study of silver nanoparticle production using Neurospora intermedia

Elucidation of the molecular mechanism of silver nanoparticle (AgNP) synthesis is necessary to control nanoparticle size, shape, and monodispersity. In this study, the mechanism of AgNP formation by Neurospora intermedia was investigated. The higher production rate of AgNP formation using a culture supernatant heat‐treated at 100° and 121°C relative to that with an un‐treated culture supernatant indicated that the native form of the molecular species is not essential. The effect of the protein molecular weight (MW) on the nanoparticle size distribution and average size was studied by means of ultraviolet–visible spectroscopy and dynamic light scattering. Using un‐treated and concentrated cell‐free filtrate passed through 10 and 20 kDa cut‐off filters led to the production of AgNPs with average sizes of 25, 30, and 34 nm, respectively. Also, using the permeate fraction of cell‐free filtrate passed through a 100 kDa cut‐off filter led to the formation of the smallest nanoparticles with the narrowest size distribution (average size of 16 nm and polydispersity index of 0.18). Sodium dodecyl sulphate polyacrylamide gel electrophoresis analysis of the fungal extracellular proteins showed two notable bands with the MWs of 15 and 23 kDa that are involved in the reduction and stabilisation of the nanoparticles, respectively.Inspec keywords: silver, nanoparticles, nanofabrication, proteins, molecular weight, ultraviolet spectra, visible spectra, cellular biophysics, electrophoresis, molecular biophysicsOther keywords: Neurospora intermedia, molecular mechanism, silver nanoparticle synthesis, nanoparticle shape, nanoparticle monodispersity, AgNP formation, untreated culture supernatant, molecular species, protein molecular weight, MW, nanoparticle size distribution, ultraviolet‐visible spectroscopy, dynamic light scattering, untreated cell‐free filtrate, concentrated cell‐free filtrate, cut‐off filters, permeate fraction, polydispersity index, Sodium dodecyl sulphate polyacrylamide gel electrophoresis analysis, fungal extracellular proteins, nanoparticle reduction, nanoparticle stabilisation, temperature 100 degC, temperature 121 degC, size 25 nm, size 30 nm, size 34 nm, size 16 nm, Ag     

An ab initio study on properties of cationic chalcogen bonds in XF2Y+⋯NCZ (X═H,CN, F; Y═S,Se; Z═H,Cl, Br) complexes

The geometries, interaction energies, and bonding properties of cationic chalcogen bonds are studied in binary complexes XF₂Y⁺?NCZ (X═H, CN, F; Y═S, Se; Z═H, Cl, Br). The nature of these interactions is studied by a vast number of methods, including molecular electrostatic potential (MEP), Noncovalent Interaction Index (NCI), quantum theory of atoms in molecules (QTAIM), and natural bond orbital (NBO) analyses. The interaction energies of these complexes vary between ?20.94?kcal/mol in HF₂S⁺?NCH and ?33.72?kcal/mol in F₃Se⁺?NCBr. According to the QTAIM analysis, all these cationic chalcogen bonds are classified as a closed-shell interaction with a partial covalent character. Moreover, cooperative effects between cationic chalcogen bond and hydrogen or halogen bond interactions are studied in ternary XF₂Y⁺?NCZ?NH₃ complexes. These cooperative effects are analyzed in terms of the parameters derived from the QTAIM and NBO analyses, and electron density difference plots.     

Proximity effects of a layered periodic structure on miniaturization of patch antennas

A miniaturized microstrip antenna on a planar layered periodic structure is proposed, designed and fabricated. The proposed structure miniaturizes patch antennas in the microwave band. With varying the parameters of the proposed structure, the achieved miniaturization factor can be adjusted in the range 2.6–4.2. Numerical and experimental results are presented. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

A Zero-Pole Reposition Based, 0.95-mW, 68-dB,Linear-in-dB,Constant-Bandwidth Variable Gain Amplifier

A variable-gain amplifier with very low power consumption and wide tuning range is presented. The operational principle of this unique structure is discussed, its most important formulas are derived and its outstanding performance is verified by simulation in TSMC 0.18-μm N-well CMOS fabrication process. Owing to the novel zero-pole repositioning technique, the proposed circuit demonstrates very high frequency bandwidth of 79 MHz while drawing only 0.52 mA from 1.8 V power supply. The interesting results such as a very small core area of about 0.0025 mm² as well as a wide linear-in-dB and constant-bandwidth tuning range of 68.2 dB along with a very low power consumption of 0.95 mW are achieved utilizing standard CMOS technology. The stability of the proposed VGA is verified through transient sinusoidal response analysis. Full process, voltage and temperature (PVT) variation analysis of the circuit is also investigated through Monte Carlo and corner case analysis in order to approve the robustness of the structure. Monte Carlo simulations show standard deviation values of 4.6 dB and 78.3 MHz in gain and gain-bandwidth product, respectively. These results show that our zero-pole repositioning method would lend itself well for use in low-power and high-frequency applications, especially in high-speed automatic gain control amplifiers.     

A translinear principle based low-power high-precision RMS-to-DC converter in CMOS technology

Analog Integrated Circuits and Signal Processing - In the present study, a low-power high-precision current-mode CMOS true root mean square (RMS)-to-DC converter is presented based on the...     

Graphene nanoplatelets dispersion in poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactic acid): preparation method and its influence on electrical,crystallinity and thermomechanical properties

Poly(l-lactic acid) (PLLA)/graphene nanoplatelets (GnP) nanocomposites were prepared through solvent casting and coagulation methods. The better dispersion of graphene was achieved by ultrasounds and its effect on crystallinity, thermomechanical and electrical properties of PLLA were studied and compared in both methods. Differential scanning calorimetry (DSC) was used to investigate the crystallinity of PLLA and its composites. Field emission gun scanning electron microscope (FEG-SEM) and wide-angle X-ray scattering (WAXS) were employed to characterize the microstructure of PLLA crystallites. Dynamic mechanical thermal analysis (DMTA) was performed to study the thermomechanical properties of the nanocomposites. FEG-SEM images illustrated finer dispersion of GnP in samples obtained by coagulation method with respect to solvent casting method. Graphene imparted higher electrical conductivity to nanocomposites obtained by solvent casting under ultrasound due to better formation of graphene network. DSC thermograms and their resulting data showed positive effects of GnP on crystallization kinetics of PLLA in both methods enhanced by the nucleating effect of graphene particles. Meanwhile, the effect of GnP, as nucleating agent, was more prominent in samples produced by coagulation method without utilization of ultrasounds. WAXS patterns represented the same characteristic peaks of PLLA in nanocomposite specimens suggesting similar crystalline structure of PLLA in presence of graphene, and the intensified peaks of nanocomposites compared to neat PLLA confirmed the DSC results regarding its improved crystallinity. Graphene increased storage modulus in rubbery region and glass transition temperature of nanocomposites in the coagulation method due to restricted mobility of PLLA chains.     

Electron back-scattered diffraction and nanoindentation analysis of nanostructured Al tubes processed by multipass tubular-channel angular pressing

Microstructural evolution and mechanical properties of nanostructured 1060 aluminum alloy tubes processed by tubular-channel angular pressing (TCAP) process were investigated using electron back-scattered diffraction (EBSD), transmission electron microscopy (TEM) and nanoindentation analyzes. EBSD scans revealed a homogeneous ultrafine grained microstructure after the third passes of the TCAP process. Apart from that the mean grain sizes of the TCAP processed tubes were refined to 566 nm, 500 nm and 480 nm respectively after the first, second and third passes. The results showed that after the three TCAP passes, the grain boundaries with a high angle comprised 78% of all the boundaries. This is in comparison to the first pass processed sample that includes approximately 20% HAGBs. The TEM inspection afforded an appreciation of the role of very low-angle misorientation boundaries in the process of refining microstructure. Nanoindentation results showed that hardness was the smallest form of an unprocessed sample while the largest form of the processed sample after the three passes of TCAP indicated the highest resistant of the material. In addition, the module of elasticity of the TCAP processed samples was greater from that of the unprocessed sample.