Effect of Aging Environment on Degradation of Glass-Reinforced Epoxy

The effects of immersing coupons of glass-reinforced epoxy in four different liquid media at two separate temperatures were investigated in this study which is aimed at examining the durability of fiber-reinforced plastics currently being used in the construction industry. A commercially available epoxy resin was reinforced with 47% by weight of an epoxy-compatible, E-glass woven fabric. Composite samples were soaked for up to 5 months in distilled water, a saturated salt solution (30g/100 cc NaCl), a 5-molar NaOH solution, and a 1-molar hydrochloric acid solution. Aging was conducted at room temperature and at 60°C. Samples were harvested periodically and their tensile and fracture properties determined. The fracture surfaces were also examined using scanning electron microscopy. Results show that commercial epoxy resins used in glass fiber-reinforced polymers are fairly durable. It was found that all the solutions marginally degraded the mechanical properties of the neat resin, especially at the higher temperature; this was mainly the result of polymer hydrolysis. The strength of the composites, however, was reduced by more than 70% by the acid at room temperature and by the alkali at the elevated temperature. Water immersion was less damaging than either acid or alkali soaking, and immersion in brine had the least effect on mechanical properties. As evidenced by SEM micrographs, the worst cases of damage involved attack on the glass fibers in acid at 60°C compared to room temperature. Therefore, reinforcing glass fibers have to be protected from attack by liquid media to improve the durability of composites.     

Dynamic mechanical study of epoxy,epoxy/glass,and glass/epoxy/wood hybrid composites aged in various media

It was proposed and subsequently established that wrapping of red oak wood crossties with epoxy impregnated glass fiber composites will impart longer service life and better stiffness and strength characteristics to these hybrid ties than conventional ones and will help them better withstand environmental extremes. The objective was to understand the degrading effects of aqueous (distilled water), saline (NaCl), acidic (HCl), and alkaline (NaOH) solutions, as well as accelerated aging and freeze/thaw cycling environments on the dynamic and static mechanical properties of these hybrid materials (i.e., wood, wrapped with fiber reinforced resin) and their components. Also micrographs of composite samples, obtained through scanning electron microscopy (SEM), were studied to determine the failure mechanism of composite specimens aged in different environments. Results showed that immersion in aging media lowered the glass transition temperature (T_g) and enhanced apparent phase separation in the samples because of polymer plasticization. In water immersion, the T_g and the stiffness increased with time owing to continued resin curing. At ambient temperature, sustained load had little effect on the mechanical behavior of the aged samples. The extent of degradation was the least for samples aged in salt solution. Soaking in room‐temperature acid solution was most damaging to pure red oak wood samples. Six‐cycle aging did not damage the neat resin or the hybrid samples, whereas it damaged pure wood specimens. Therefore, the composite wrapping around the wood core of the hybrid sample protected it sufficiently, thereby preventing damage to the hybrid specimen during the aging process. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Characterization of Flow Behavior of Semi-Solid Slurries with Low Solid Fractions

Semi-solid slurry casting is a metal-forming process that involves transforming liquid metal into slurry having a low solid fraction and then forming the slurry into solid parts. To successfully apply this slurry-forming process, it is necessary to fully understand the flow behavior of semi-solid slurries. This present work applied the rapid quenching method and the modified gravity fluidity casting to investigate the flow behavior, which involves characterizations of the initial solid fraction, fluidity, and microstructure of semi-solid slurries. Three commercial aluminum alloys were used in this study: 383 (Al-Si11Cu), 356 (Al-Si7MgFe), and 7075 (Al-Zn6MgCu) alloys. The results show that the initial solid fractions can be controlled by varying the rheocasting time. The rapid quenching mold can be used to determine the initial solid fractions. In this method, it is important to apply the correcting procedure to account for growth during quenching and to include all the solid phases. Results from the fluidity study of semi-solid slurries show that the fluidity decreases as the initial solid fraction increases. The decrease is relatively rapid near the low end of the initial solid fraction curves, but is quite slow near the high end of the curves. All the three alloys follow this trend. The results also demonstrate that the slurries that contain high solid fractions of up to 30 pct can still flow well. The microstructure characterization results show that the solid particles in the slurries flow uniformly in the channel. A uniform and fine microstructure with limited phase segregation is observed in the slurry cast samples.     

Cloning,Expression and Characterization of a Thermostable Esterase HydS14 from Actinomadura sp. Strain S14 in Pichia pastoris

A thermostable esterase gene (hydS14) was cloned from an Actinomadura sp. S14 gene library. The gene is 777 bp in length and encodes a polypeptide of 258 amino acid residues with no signal peptide, no N-glycosylation site and a predicted molecular mass of 26,604 Da. The encoded protein contains the pentapeptide motif (GYSLG) and catalytic triad (Ser88-Asp208-His235) of the esterase/lipase superfamily. The HydS14 sequence shows 46%–64% identity to 23 sequences from actinomycetes (23 α/β-hydrolases), has three conserved regions, and contains the novel motif (GY(F)SLG), which distinguishes it from other clusters in the α/β-hydrolase structural superfamily. A plasmid containing the coding region (pPICZαA-hydS14) was used to express HydS14 in Pichia pastoris under the control of the AOXI promoter. The recombinant HydS14 collected from the supernatant had a molecular mass of ~30 kDa, which agrees with its predicted molecular mass without N-glycosylation. HydS14 had an optimum temperature of approximately 70 °C and an optimum pH of 8.0. HydS14 was stable at 50 and 60 °C for 120 min, with residual activities of above 80% and above 90%, respectively, as well as 50% activity at pH 6.0–8.0 and pH 9.0, respectively. The enzyme showed higher activity with p-nitrophenyl-C2 and C4. The K_m and V_max values for p-nitrophenyl-C4 were 0.21 ± 0.02 mM and 37.07 ± 1.04 μmol/min/mg, respectively. The enzyme was active toward short-chain p-nitrophenyl ester (C2–C6), displaying optimal activity with p-nitrophenyl-C4 (K_cat/K_m = 11.74 mM⁻¹·S⁻¹). In summary, HydS14 is a thermostable esterase from Actinomadura sp. S14 that has been cloned and expressed for the first time in Pichia pastoris.     

UV inactivation and model of UV inactivation of foot-and-mouth disease viruses in suspension

Foot-and-mouth disease virus (FMDV) causes one of the most contagious diseases affecting cloven-hoofed animals (e.g., cattle and swine) and causes severe economic loss for many countries. The resistance to UV irradiation of FMDV strains isolated from outbreaks in Thailand was investigated in phosphate-buffered saline at 25 degrees C. Since the regression coefficients of linear regression were large and root mean square errors were small, UV inactivation could be appropriately summarized and fitted well by a linear equation. The first-order kinetics then could describe UV inactivation, which was experimentally and mathematically shown in this study to be an effective means to inactivate FMDV in suspension. The decimal inactivation dose (DID) was modified from D value in traditional thermal-inactivation kinetics. The DID was the amount of UV irradiation required to reduce the number of microorganisms by a factor of 10, or by 90%. DIDs of FMDV serotypes O189, A132, A-Sakol, and AS1 ranged from 19.66 to 31.31 mWs/cm(2). FMDV serotype AS1 was the most UV-resistant, and FMDV serotype A132 was the least UV-resistant. UV resistance of FMDV did not vary significantly among strains and serotypes (P value>0.05). DID raw data were used to determine the fitted probability distributions by simulation software @Risk. The fitted distributions suggested were Exponential, Logistic, Normal, and LogNormal. Exponential distribution was the best fit by Chi-square test, Kolmogorov-Smirnov test, and Anderson-Darling test (P value>0.10). The parameter beta of the Exponential distribution, equivalent to the mean DID, was 24.173 mWs/cm(2) as a first-order model. Poisson probability distribution described the uncertainty of parameter beta for the second-order model. After running simulations of both first-order and second-order models, the curves of both first-order and second-order models were overlaid on the same graph, which indicated that both models were only slightly different. This study concluded that FMDV in suspension was effectively inactivated by UV irradiation, the fitted probability distribution for UV inactivation was Exponential, and source of total uncertainty of this UV-inactivation model was not the uncertainty component.     

Variation of microstructure and mechanical property of slurry die cast Al-Si-Mg-Fe alloy

Semi-solid metal processing technologies have been intensively studied in recent years. Gas Induced Semi-Solid (GISS) is a slurry preparation technique for producing non-dendritic or globular structures for cast alloys. In the present study, GISS technique was used in conjunction with conventional die cast process for casting Al–Si–Mg–Fe alloy. The shape of die cast specimen was designed as a simple flat plate. The variation of microstructures and tensile properties of specimens from different locations of cast plates was studied. The results show that the specimens from bottom location, near the gate section and the middle location of cast plates are stronger and more ductility than those from the top location. The microstructural examination reveals that the specimens from top location of cast plates contain more defects, such as shrinkage pores than those from the other locations. These defects are resulted in lower strength and ductility of the cast product.     

Mobility determination of lead isotopes in glass for retrospective radon measurements

In retrospective radon measurements, the 22-y half life of (210)Pb is used as an advantage. (210)Pb is often considered to be relatively immobile in glass after alpha recoil implanted by (222)Rn progenies. The diffusion of (210)Pb could, however, lead to uncertain wrong retrospective radon exposure estimations if (210)Pb is mobile and can escape from glass, or lost as a result of cleaning-induced surface modification. This diffusion was studied by a radiotracer technique, where (209)Pb was used as a tracer in a glass matrix for which the elemental composition is known. Using the ion guide isotope separator on-line technique, the (209)Pb atoms were implanted into the glass with an energy of 39 keV. The diffusion profiles and the diffusion coefficients were determined after annealing at 470-620 degrees C and serial sectioning by ion sputtering. In addition, the effect of surface cleaning on diffusion was tested. From the Arrhenius fit, the activation enthalpy (H) was determined, which is equal to 3.2 +/- 0.2 eV, and also the pre-exponential factor D(0), in the order of 20 m(2)s(-1). This result confirms the assumption that over a time period of 50 y (209)Pb (and (210)Pb) is effectively immobile in the glass. The boundary condition obtained from the measurements had the characteristic of a sink, implying loss of (209)Pb in the topmost surface at high temperatures.