Inhibitory effect of parthenium (Parthenium hysterophorus L.) residue on growth of water hyacinth (Eichhornia crassipes Mart Solms.) II. Relative effect of flower,leaf, stem,and root residue

The relative effect of residue of leaf, flower, stem, and root of parthenium (Parthenium hysterophorus L.) on growth of water hyacinth was studied. The inhibitory activity of the residue as shown by its effect on biomass and healthy leaf number (HLN) of treated plants was in the order: leaf and flower >stem >root. Total phenolic acids in the medium after 72 hr of suspending the plant part residue were maximum in flower followed by leaf, root, and stem, successively. The dry leaf powder (DLP) and dry flower powder (DFP) at and above 0.50% (w/v) and dry stem powder (DSP) at 1.00% (w/v) killed water hyacinth in about one month. Dry root powder (DRP) at the highest dose (1.25% w/v) reduced the growth of the treated plants drastically, but the plants recovered after about one month. The DSP at 0.50% (w/v) and DRP at 0.25–0.75% (w/v) supported growth of treated plants, probably due to lower levels of inhibitors, allowing utilization of constituents of the residue as nutrients. Using wheat seedlings as a reference material, it was observed that in aquaculture at different levels of parthenium plant parts residue, water hyacinth plants were much more sensitive to inhibitory activity. Thus, water hyacinth is suggested as a material for bioassay of inhibitory activity of the parthenium plant residue.     

Double-positive thymocytes resistant to antigen-MHC-induced negative selection lack active caspase

The aim of the current study was to elucidate the synergism of dietary calcium restriction and exhaustive exercise in the antioxidant enzyme system of rat soleus muscle, and to investigate the involvement of neutrophils in exercise-induced muscle damage. Forty-eight male Wistar rats were assigned to the following groups: control (C) or calcium-restricted [1 month (1 M) or 3 months (3 M)]. Each group was subdivided into acutely exercised or non-exercised groups. Soleus muscle from each rat was analysed to determine the levels of antioxidant enzymes [Mn-superoxide dismutase (SOD), Cu, Zn-SOD, glutathione peroxidase (GPX), and catalase (CAT)]. Dietary calcium restriction resulted in calcium deficiency and upregulated the antioxidant enzymes examined except GPX. Conversely, exhaustive exercise significantly decreased GPX and CAT, but not SODs activities in the calcium-restricted (1 M and/or 3 M) rats. Contents of immunoreactive Mn-SOD and Cu,Zn-SOD were only increased in the 3 M rats. During calcium restriction, the mRNA expression of both forms of SOD showed initial upregulation, followed by downregulation. Exhaustive exercise significantly increased the mRNA expressions only in the 3 M rats. Moreover, exhaustive exercise markedly increased myeloperoxidase activity in soleus muscles from the 1 M and 3 M rats compared with the C rats, and significantly enhanced the ability of neutrophils to generate superoxide in the 3 M rats. The results demonstrate that dietary calcium restriction upregulates certain antioxidant enzyme activities in rat soleus muscle, indicating an enhanced resistance to potential increases in intracellular reactive oxygen species. The results also suggest that exhaustive exercise may cause oxidative damage in soleus muscle of calcium-deficient rats through the activation of neutrophils.     

One pot synthesis of nano Ag in calcium alginate beads and its catalytic application in p‐Nitrophenol reduction with kinetic parameter estimation and model fitting

In this work, one step process of synthesis of silver nanoparticles (Agnp) embedded in insitu formed calcium alginate (CA) beads is stated. CA, formed from the reaction between sodium alginate and calcium hydroxide, acts as reducing and stabilizing agent as well as support for nanoparticles. The reaction mechanism for the formation and stabilization of Agnp is proposed where the vicinal dihydroxy groups of alginate are assumed to act as the reducing agent for Ag⁺ to Ag°. Transmission electron microscopy (TEM), x‐ray diffraction (XRD), UV‐vis spectroscopy, field emission scanning electron microscopy (FESEM), and atomic absorption spectroscopy (AAS) were used to characterize the Agnp. The formation of spherical nanoparticles with average size range of 4‐5 nm was confirmed by TEM. Catalytic activity of this nano silver‐calcium alginate (Agnp‐CA) composite was evaluated in the reduction of p‐nitrophenol. Concentrations of sodium alginate, calcium hydroxide, and AgNO₃ are found to be the parameters that critically affect the synthesis of Agnp. The efficacy of the catalyst is expressed on the basis of suitable reaction parameters. Both pseudo‐homogeneous and heterogeneous kinetic models are proposed for the reaction to find the best model and the Eley‐Riedel model is found to fit well with the experimental data. The novelty of this work is that the tandem process of CA bead formation, Agnp formation, and Agnp entrapment in CA have been transformed into a single‐step process. Moreover, elaborations of each step of the ionic mechanisms of Agnp formation and p‐NP reduction with Agnp and the establishment of a heterogeneous kinetic model for the reaction are reported for the first time here.     

Gas-Sensing Properties of Zinc Ferrite Nanoparticles Synthesized by the Molten-Salt Route

Zinc ferrite (ZnFe₂O₄) nanoparticles have been synthesized at 700°C using sodium chloride as a growth inhibitor. Single-phase formation of spinel zinc ferrite having crystallite size in the range of 15–20 nm was observed by XRD and confirmed by TEM. In the present work, the gas-sensing properties of these zinc ferrite nanoparticles toward ethanol, LPG, H₂, NO _x . SO _x , and H₂S have been studied. It was found that they exhibit excellent selective sensitivity toward 200 ppm of H₂S at the operating temperature of 250°C, and thus this nanosized ferrite is expected to be useful in an industrial application as a potential H₂S gas sensor.     

Barriers to access before initiation of hemodialysis: a single-center review

Guidelines recommend that > or =50% of patients starting dialysis have a fistula. We reviewed our experience in consecutive incident patients over a 1-year period. Only 30 of the 93 patients starting hemodialysis had a fistula that was accessed. Late referral (nephrology contact <90 days) was a significant issue in 48% (30/63) of the patients without a fistula. Most (n=21) of the late referrals were acute disease; only 9 were late referrals of chronic disease. Nephrology follow-up exceeded 200 days in the remaining (33/63) without this access. In the cohort with sufficient nephrology referral, we explored variables associated with a fistula (n=30) compared with those without one (n=33). In multivariate logistic regression analysis, peripheral vascular disease (odds ratio [OR] 0.026, 95% confidence interval [CI] 0.002-0.286) and rapid loss of estimated glomerular filtration rate (eGFR) (OR 0.745 per mL/min/1.73 m(2)/year, 95% CI 0.625-0.888) in the year preceding dialysis were significant negative predictors for a fistula. Patients without access experienced faster declines in GFR in the year preceding dialysis (12.1+/-9.9 vs. 4.7+/-3.5 mL/min 1.73 m(2) with access, p<0.001). Glomerular filtration rate loss in the 2 years before starting dialysis was the same between the 2 groups (-0.54+/-10.4 vs. 1.42+/-3.9 mL/min 1.73 m(2)). Age, sex, diabetes, other comorbidity, length of nephrology follow-up, eGFR at dialysis start, hemoglobin, and albumin were not significant. At our center, rapid loss of renal function in otherwise stable chronic kidney disease (CKD) patients is more important than late referral of CKD for the lack of access. Improvements in rapid referral for access creation could help reduce this barrier.     

CATALYTIC UPGRADING OF USED LUBRICATING OILS

Several commercial catalysts were tested for their activity for upgrading waste lubricating oils. The feedstock was vacuum distilled to remove the light and the heavy ends. Two trickle-bed reactors placed in series were employed, the top reactor contained a high surface area alumina and the bottom reactor the catalyst. A Ni-Mo-AI₂O₃ catalyst was selected for further study on the basis of its higner activity and activity maintenance. Several different hydrogen pressures, reactor temperatures, and liquid volume hourly space velocities were employed to arrive at the most optimum process conditions. This paper will discuss the effect of catalyst and process conditions on the product liquid color, viscosity, nitrogen, and sulfur content.     

A kinetic approach to the esterification of maleic anhydride with methanol on H-Y zeolite

The purpose of this work is to study the kinetics of the esterification of maleic anhydride with methanol to form dimethyl maleate in a batch reactor in the presence of H-Y zeolite as a catalyst. This is a series-parallel type multiple reaction where, the first reaction involves the formation of monomethyl maleate that further reacts with alcohol to form dimethyl maleate. Dimethyl maleate was found to be the only product in the reaction mixture. Temperature, speed of agitation, catalyst size, reactant mole ratio and catalyst loading have pronounced effect on the rate of the reaction. A homogeneous rate model and heterogeneous rate models have been derived and fitted with the experimental data. The activation energy was found to be 44.65 kJ/mol.