Dielectric and magnetoelectric properties of co-fired PbZr0.52Ti0.48O3–Co0.6Zn0.4Mn0.3Fe1.7O4–PbZr0.52Ti0.48O3 trilayer composites

In this paper we report the dielectric and magnetoelectric (ME) properties of co-fired Pb_0.52Ti_0.48O₃–Co_0.6Zn_0.4Mn_0.3Fe_1.7O₄–PbZr_0.52Ti_0.48O₃ (PZT–CZFMO–PZT) trilayer composites prepared using Mn and Zn simultaneously substituted CoFe₂O₄ (Co_0.6Zn_0.4Mn_0.3Fe_1.7O₄) as a magnetostrictive phase. For PZT–CZFMO–PZT composites, the maximum values of longitudinal and transverse ME voltage coefficient (α _E33 and α _E31 ) were observed to be comparable in magnitude contrary to the usual trend (α _E31 much greater than α _E33 ) for ME composite structures. The highest transverse ME voltage coefficient α _E31 ~64 mV/cm Oe (at an applied ac magnetic field of frequency ~1 kHz) was obtained for the composite containing the thickest layer of CZFMO. The dielectric constant spectra for PZT–CZFMO–PZT composites demonstrated very high values of resonance frequency (~47–81 MHz) and band width (~9–13 MHz).     

An android for enhancing social skills and emotion recognition in people with autism.

It is well documented that the processing of social and emotional information is impaired in people with autism. Recent studies have shown that individuals, particularly those with high functioning autism, can learn to cope with common social situations if they are made to enact possible scenarios they may encounter in real life during therapy. The main aim of this work is to describe an interactive life-like facial display (FACE) and a supporting therapeutic protocol that will enable us to verify if the system can help children with autism to learn, identify, interpret, and use emotional information and extend these skills in a socially appropriate, flexible, and adaptive context. The therapeutic setup consists of a specially equipped room in which the subject, under the supervision of a therapist, can interact with FACE. The android display and associated control system has automatic facial tracking, expression recognition, and eye tracking. The treatment scheme is based on a series of therapist-guided sessions in which a patient communicates with FACE through an interactive console. Preliminary data regarding the exposure to FACE of two children are reported.     

Electroactive carbon nanotube actuators: Soft-lithographic fabrication and electro-chemical modelling

Carbon nanotube (NT) actuators were fabricated using the micromolding method. In order to prevent the nanotubes from aggregating, they were enclosed in a partially cross-linked polyvinylalcohol–polyallylamine matrix. A unimorph matrix bender in the form of a small multi-layered strip, 5 mm × 15 mm was fabricated. The resulting composite system: NT/PVA, solid polymer electrolyte and metal contact, was characterised using impedance analysis and cyclic voltammetry. Initial measurements on electro-mechanical transduction show a conversion efficiency of 0.2 μm/mV. An electrochemical model of the impedance of the system was then developed, with which the experimental results agree fairly well.     

Multi-User Relaying of High-Rate Space–Time Code in Cooperative Networks

In this paper, we propose high-rate space–time coding for cooperative wireless networks to reduce the overall delay incurred in relaying signals to multiple receivers. The relay structure is optimized in order to achieve maximum SNR at the receiver nodes. The proposed scheme provides a significant reduction in the delay required for the relaying and transmission of the signals to the multiple receivers with a minute loss in performance. We have also shown by simulation that this loss in the performance could be recovered by selecting more number of relays. We propose two relaying strategies for high-rate space–time codes, which are very useful in providing high data-rate in wireless cooperative networks.     

Electricity consumption in G7 countries: A panel cointegration analysis of residential demand elasticities

This article applies recently developed panel unit root and panel cointegration techniques to estimate the long-run and short-run income and price elasticities for residential demand for electricity in G7 countries. The panel results indicate that in the long-run residential demand for electricity is price elastic and income inelastic. The study concludes that from an environmental perspective there is potential to use pricing policies in the G7 countries to curtail residential electricity demand, and thus curb carbon emissions, in the long run.     

Synthesis and characterization of polysaccharide based graft copolymer by using potassium peroxymonosulphate/ascorbic acid as an efficient redox initiator in inert atmosphere

Polysaccharide based graft copolymer (xanthan gum‐g‐4‐vinyl pyridine) was synthesized using potassium peroxymonosulphate/ascorbic acid redox initiator in inert atmosphere at 40°C. By studying the effect of the concentration of monomer, peroxymonosulphate (PMS), ascorbic acid (AA), xanthan gum (XOH), hydrogen ion along with effect of time and temperature on grafting characteristics: grafting ratio (%G), add on (%A), conversion (%C), efficiency (%E), homopolymer (%H), and rate of grafting (Rg), the reaction conditions for optimum grafting were determined. The optimum concentration of AA, H⁺ ion, 4‐VP for maximum grafting were found to be 10.0 × 10^?3 mol dm^?3, 2.5 × 10^?2 mol dm^?3, 10.0 × 10^?3 mol dm^?3, respectively. Maximum %G was obtained at minimum concentration of xanthan gum i.e., at 40.0 × 10^?2 g dm^?3 and at maximum concentration of PMS i.e., at 10.0 × 10^?3 mol dm^?3. The optimum temperature and time duration of reaction for maximum % of grafting were found to be 45°C and 120 min respectively. The synthesized graft copolymer was characterized by FTIR analysis. Thermogravimetric analysis showed that the xanthan gum‐g‐4‐vinyl pyridine is thermally more stable than pure gum. A probable mechanism was suggested for the graft copolymerization. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

An Investigation of Massive Gain in Hybrid Configurable Cylindrical Dielectric Resonator Antenna

Delay Tolerant Networks (DTNs) have attracted various interests these days. Since DTNs are subject to high loss rate, large delay, intermittent connection, and even no end-to-end connectivity, relay nodes, such as throwboxes, are deployed to enhance network performance. Internet-based systems have contemporaneous connectivity between location-distributed nodes, and this does not apply to DTNs. Thus, the traditional relay node deployment strategies are no longer suitable for DTNs. In this paper, we propose a novel strategy, named Connection-2 (\(CO_2\)), to deploy throwboxes to enhance the fault tolerance of DTNs. \(CO_2\) constructs a 2-connected DTN using an approximation algorithm. Every mobile node in the 2-connected DTN can reach another mobile node via two or more node-disjoint paths within its mobility range. While enhancing fault tolerance, the number of throwboxes that \(CO_2\) requires is small. We conduct various experiments based on the simulation of the real Tuscaloosa bus transit system and compare its performance with two popular strategies. Experimental results show that \(CO_2\) is effective.