Stabilization of 6H-Hexagonal SrMnO3 Polymorph by Al2O3 insertion

We demonstrate the structural evolution of polymorphic phases in Al₂O₃-inserted SrMnO₃ ceramics synthesized by solid state reaction. While the 4H-hexagonal phase is predominant in pure SrMnO₃ ceramics, a small amount of 6H-hexagonal polymorph is identified in addition to the primary 4H-hexagonal SrMnO₃ and the secondary hexagonal SrAl₂O₄ phases in the as-sintered ceramics, evidenced by x-ray diffraction and subsequent Rietveld refinement analyses. The existence of the 6H-hexagonal SrMnO₃ phase is corroborated using Raman spectroscopy. The chemical compositions and electronic structures of the Al₂O₃-inserted SrMnO₃ compounds are also examined using energy dispersive spectroscopy and x-ray photoelectron spectroscopy, respectively. The first-principles calculations reveal that there is no clear difference between the total energies of 4H- and 6H-hexagonal polymorphs regardless of the presence/absence of Sr and oxygen vacancies. Possible origins are discussed with the estimation of actual strain based on the refined lattice parameter of 6H SrMnO₃.     

Frequency Insertion Strategy for Channel Assignment Problem

This paper presents a new heuristic method for quickly finding a good feasible solution to the channel assignment problem (CAP). Like many other greedy-type heuristics for CAP, the proposed method also assigns a frequency to a call, one at a time. Hence, the method requires computational time that increases only linear to the number of calls. However, what distinguishes the method from others is that it starts with a narrow enough frequency band so as to provoke violations of constraints that we need to comply with in order to avoid radio interference. Each violation is then resolved by inserting frequencies at the most appropriate positions so that the band of frequencies expands minimally. An extensive computational experiment using a set of randomly generated problems as well as the Philadelphia benchmark instances shows that the proposed method perform statistically better than existing methods of its kind and even yields optimum solutions to most of Philadelphia benchmark instances among which two cases are reported for the first time ever, in this paper. Won-Young Shin was born in Busan, Korea in 1978. He received B.S. in industrial engineering from Pohang University of Science and Technology (POSTECH) in 2001 and M.S in operation research and applied statistics from POSTECH in 2003. Since 2003 he has been a researcher of Agency for Defense Development (ADD) in Korea. He is interested in optimization of communication system and applied statistics. Soo Y. Chang is an associate professor in the Department of Industrial Engineering at Pohang University of Science and Technology (POSTECH), Pohang, Korea. He teaches linear programming, discrete optimization, network flows and operations research courses. His research interests include mathematical programming and scheduling. He has published in several journals including Discrete Applied Mathematics, Computers and Mathematics with Application, IIE Transactions, International Journal of Production Research, and so on. He is a member of Korean IIE, and ORMSS. Jaewook Lee is an assistant professor in the Department of Industrial Engineering at Pohang University of Science and Technology (POSTECH), Pohang, Korea. He received the B.S. degree in mathematics with honors from Seoul National University, and the Ph.D. degree from Cornell University in applied mathematics in 1993 and 1999, respectively. He is currently an assistant professor in the department of industrial engineering at the Pohang University of Science and Technology (POSTECH). His research interests include nonlinear systems, neural networks, nonlinear optimization, and their applications to data mining and financial engineering. Chi-Hyuck Jun was born in Seoul, Korea in 1954. He received B.S. in mineral and petroleum engineering from Seoul National University in 1977, M.S. in industrial engineering from Korea Advanced Institute of Science and Technology in 1979 and Ph.D. in operations research from University of California, Berkeley, in 1986. Since 1987 he has been with the department of industrial engineering, Pohang University of Science and Technology (POSTECH) and he is now a professor and the department head. He is interested in performance analysis of communication and production systems. He has published in several journals including IIE Transactions, IEEE Transactions, Queueing Systems and Chemometrics and Intelligent Laboratory Systems. He is a member of IEEE, INFORMS and ASQ.     

Ethylene polymerization over MgO‐supported zirconocene catalysts

Supported zirconcene catalysts on a new support, MgO, were prepared and tested in ethylene polymerization. Three types of impregnation methods were employed to find an optimum supporting method for MgO. The direct impregnation of Cp₂ZrCl₂ on MgO showed low metal loading and polymerization activity, while the catalyst had a higher metal loading and polymerization activity when MgO was treated with methylaluminoxane (MAO) before supporting. Treatment of MgO with MAO during the supporting step invoked two types of catalytic sites, which was evidenced by the bimodal molecular weight distribution of the polymer products. MgO is considered to have potential as a support for metallocenes.     

Temperament and substance abuse in schizophrenia: is there a relationship?

Dyspnea may be easily appreciated during exercise with dyspneic scales, but methodological standardisation still needs to be specified. Authors review the basic physiological mechanism relating dyspnea to indices obtained during a stress test. They propose to use the dyspnea/VE relationship. With the concept of dyspneic threshold (close to the ventilatory threshold) and the ramp that both could be modified (for instance by rehabilitation programmes including exercise training). Interpretation of dyspnea during an exercise test obviously needs to be integrated with other parameters studied during exercise.     

A new method for seed oil body purification and examination of oil body integrity following germination

Plant seeds store triacylglycerols as energy sources for germination and postgerminative growth of seedlings. The triacylglycerols are preserved in small, discrete, intracellular organelles called oil bodies. A new method was developed to purify seed oil bodies. The method included extraction, flotation by centrifugation, detergent washing, ionic elution, treatment with a chaotropic agent, and integrity testing by use of hexane. These processes subsequently removed non-specifically associated or trapped proteins within the oil bodies. Oil bodies purified by this method maintained their integrity and displayed electrostatic repulsion and steric hindrance on their surface. Compared with the previous procedure, this method allowed higher purification of oil bodies, as demonstrated by SDS-PAGE using five species of oilseeds. Oil bodies purified from sesame were further analyzed by two-dimensional gel electrophoresis and revealed two potential oleosin isoforms. The integrity of oil bodies in germinating sesame seedlings was examined by hexane extraction. Our results indicated that consumption of triacylglycerols reduced gradually the total amount of oil bodies in seedlings, whereas no alteration was observed in the integrity of remaining oil bodies. This observation implies that oil bodies in germinating seeds are not degraded simultaneously. It is suggested that glyoxisomes, with the assistance of mitochondria, fuse and digest oil bodies one at a time, while the remaining oil bodies are preserved intact during the whole period of germination.     

Fast DCT algorithm with fewer multiplication stages

A novel fast DCT scheme with reduced multiplication stages and fewer additions and multiplications is proposed. The proposed algorithm is structured so that most multiplications tend to be performed at the final stage, which reduces the propagation error that could occur in the fixed-point computation. Minimisation of the multiplication stages can further decrease the error     

Isoforms p69 and p100 of 2'',5''-oligoadenylate synthetase induced differentially by interferons in vivo and in vitro

There is no better place to test life-saving resuscitation interventions than in the prehospital setting. Patients rarely survive cardiac arrest if resuscitation techniques have failed before leaving the scene. Also, paramedics are usually very experienced in key initial resuscitative techniques, and they routinely operate under strict paramilitary protocol, resulting in better study compliance. In addition, the large study populations that are derived from emergency medical services (EMS) systems lead to faster study completion and statistically stronger data. Most important, by reinforcing standardized care, rigidly scrutinized trials improve patient care, regardless of the effect of the study intervention. The success of productive EMS research centers requires routine communication between hospital and EMS administrators and their medical directors, designation of mutually acceptable data collectors who guarantee confidentiality, reciprocal exchange of study data provided as educational seminars to the hospitals, commitments to support the budget requests of an EMS program and appropriate system modifications, inclusion of EMS personnel in study design from the very beginning, prospective education of the medical community and media before protocol implementation, an authoritative grassroots medical director, and a paramedic supervisor system.     

Effect of type of processing on the microstructural features and mechanical properties of Al-Cu/SiC metal matrix composites

In this study, an aluminum based metallic matrix (Al-2wt.% Cu) was reinforced with SiC particulates using a conventional casting technique and a new disintegrated melt deposition technique. Microstructural characterization studies conducted on the samples taken from disintegrated melt deposition technique revealed a more uniform distribution of SiC particulates and good interfacial integrity between SiC particulates and metallic matrix when compared to the conventionally cast composite samples. Results of ambient temperature mechanical tests demonstrate an increase in 0.2% YS and ultimate tensile strength of samples taken from disintegrated melt deposition technique when compared with the unreinforced and conventionally cast composite samples. The results of microstructural characterization and mechanical testing were finally rationalized in terms of the nature of processing technique employed to reinforce Al-2wt.% Cu metallic matrix with SiC particulates.