A preliminary investigation into the microscopic depassivation of passive titanium implant materials in vitro

A sensitive electrochemical technique has been used to examine the passive state of titanium-based materials in Ringer's physiological solution. At ambient temperature, the alloy Ti-6Al-4V shows transient microscopic breakdown of the passive state induced by the presence of chloride ions, and enhanced by increased acidity. These breakdown events involve highly localized depassivation of the passive surface followed by repassivation. Under similar experimental conditions no breakdown of passive titanium was detected.     

Comparison of two Varieties of Microcrystalline Cellulose as Filler-Binders II. Hydrochlorothiazide Tablets

In tests of direct-compression hydrochlorothiazide tablets prepared with either of two varieties of microcrystalline cellulose (Avicel PH 101 and Avicel PH 102), PH 102 tablets had better mechanical properties (owing to lower compressibility of mixtures and greater Interparticle bonding), while PH 101 tablets released the active principle faster. These differences are related to observed differences In tablet micropore structure.     

One-Way Functions Using Algorithmic and Classical Information Theories

We prove several results relating injective one-way functions, time-bounded conditional Kolmogorov complexity, and time-bounded conditional entropy. First we establish a connection between injective, strong and weak one-way functions and the expected value of the polynomial time-bounded Kolmogorov complexity, denoted here by?E(K ^t (x|f(x))). These results are in both directions. More precisely, conditions on?E(K ^t (x|f(x))) that imply that?f is a weak one-way function, and properties of?E(K ^t (x|f(x))) that are implied by the fact that?f is a strong one-way function. In particular, we prove a separation result: based on the concept of time-bounded Kolmogorov complexity, we find an interval in which every function?f is a necessarily weak but not a strong one-way function. Then we propose an individual approach to injective one-way functions based on Kolmogorov complexity, defining Kolmogorov one-way functions and prove some relationships between the new proposal and the classical definition of one-way functions, showing that a Kolmogorov one-way function is also a deterministic one-way function. A relationship between Kolmogorov one-way functions and the conjecture of polynomial time symmetry of information is also proved. Finally, we relate?E(K ^t (x|f(x))) and two forms of time-bounded entropy, the unpredictable entropy?H ^unp, in which ??one-wayness?? of a function can be easily expressed, and the Yao⁺ entropy, a measure based on compression/decompression schema in which only the decompressor is restricted to be time-bounded.     

On the constraints violation in forward dynamics of multibody systems

It is known that the dynamic equations of motion for constrained mechanical multibody systems are frequently formulated using the Newton–Euler’s approach, which is augmented with the acceleration constraint equations. This formulation results in the establishment of a mixed set of partial differential and algebraic equations, which are solved in order to predict the dynamic behavior of general multibody systems. The classical solution of the equations of motion is highly prone to constraints violation because the position and velocity constraint equations are not fulfilled. In this work, a general and comprehensive methodology to eliminate the constraints violation at the position and velocity levels is offered. The basic idea of the described approach is to add corrective terms to the position and velocity vectors with the intent to satisfy the corresponding kinematic constraint equations. These corrective terms are evaluated as a function of the Moore–Penrose generalized inverse of the Jacobian matrix and of the kinematic constraint equations. The described methodology is embedded in the standard method to solve the equations of motion based on the technique of Lagrange multipliers. Finally, the effectiveness of the described methodology is demonstrated through the dynamic modeling and simulation of different planar and spatial multibody systems. The outcomes in terms of constraints violation at the position and velocity levels, conservation of the total energy and computational efficiency are analyzed and compared with those obtained with the standard Lagrange multipliers method, the Baumgarte stabilization method, the augmented Lagrangian formulation, the index-1 augmented Lagrangian, and the coordinate partitioning method.     

Least squares support vector machines with tuning based on chaotic differential evolution approach applied to the identification of a thermal process

In the past decade, support vector machines (SVMs) have gained the attention of many researchers. SVMs are non-parametric supervised learning schemes that rely on statistical learning theory which enables learning machines to generalize well to unseen data. SVMs refer to kernel-based methods that have been introduced as a robust approach to classification and regression problems, lately has handled nonlinear identification problems, the so called support vector regression. In SVMs designs for nonlinear identification, a nonlinear model is represented by an expansion in terms of nonlinear mappings of the model input. The nonlinear mappings define a feature space, which may have infinite dimension. In this context, a relevant identification approach is the least squares support vector machines (LS-SVMs). Compared to the other identification method, LS-SVMs possess prominent advantages: its generalization performance (i.e. error rates on test sets) either matches or is significantly better than that of the competing methods, and more importantly, the performance does not depend on the dimensionality of the input data. Consider a constrained optimization problem of quadratic programing with a regularized cost function, the training process of LS-SVM involves the selection of kernel parameters and the regularization parameter of the objective function. A good choice of these parameters is crucial for the performance of the estimator. In this paper, the LS-SVMs design proposed is the combination of LS-SVM and a new chaotic differential evolution optimization approach based on Ikeda map (CDEK). The CDEK is adopted in tuning of regularization parameter and the radial basis function bandwith. Simulations using LS-SVMs on NARX (Nonlinear AutoRegressive with eXogenous inputs) for the identification of a thermal process show the effectiveness and practicality of the proposed CDEK algorithm when compared with the classical DE approach.     

Modeling the reliability of a group membership protocol for dual-scheduled time division multiple access networks

We present reliability models for a group membership protocol designed for TDMA networks such as FlexRay, a protocol that is likely to become the de facto standard for next generation automotive networks. The models are based on discrete-time Markov chains and consider a comprehensive set of fault scenarios. Furthermore, they are parametric allowing for a sensitivity analysis. The results, obtained by a numeric solution of the models using the PRISM model-checker, show that they are computationally practical for realistic configurations and that the GMP can achieve reliability levels in the range required for safety critical applications.     

Resistance variation of conductive ink applied by the screen printing technique on different substrates

This research study focuses on the application of conductive ink by the screen printing technique to evaluate the potential of creating printed electrodes and to investigate the effect of washing upon electrical resistance and flexibility. Two conductive inks were applied by a conventional screen printing method on four different textile substrates, 100% cotton, 50%/50% cotton/polyester, 100% polyester and 100% polyamide. The inks were also applied on a multifibre fabric. Atmospheric plasma treatment was applied to improve the adhesion to the samples, and the resistance values were compared with those of non‐treated samples. The values were measured before and after cleaning and washing tests, which were performed to simulate domestic treatment for garments to predict the behaviour of the inks after normal usage of the fabrics. Comfort properties like stiffness of the fabrics were also evaluated after five and 10 washing cycles. It was observed that PE 825 ink forms a thicker film on the fabric surface, contributing to the loss of flexibility of the textile. However, PE 825 ink also produced the best results in terms of durability and lower values of resistance. Polyamide fabrics lost their conductive property after five washing cycles due to weak bonding between the ink and the fibres, whereas cotton fibres provided the best results.     

Cold Plasma Modification Effects on the Water Flow through Sintered UHMWPE Membranes

Natural rubber latex and various concentration of natural antioxidant were blended in different ratios and irradiated at various absorbed doses by gamma rays from Co-60 source at room temperature. The aqueous extraction of Diospyros peregrina was used as natural antioxidant. It was found that the addition of different concentration of natural antioxidant into natural rubber latex improve the aging property of the film. Decreasing in tensile strength of rubber film with 10 phr natural antioxidant and 15 kGy radiation dose after 24 hours aging at 100°C was 9.34% compared to 13.89% for film without natural antioxidant. The tensile strength, tear resistance and modulus at 500% elongation of the rubber film were found to be optimum at 15 kGy radiation dose and with 10 phr natural antioxidant. Elongation at break, permanent set and swelling ratio decreases with the increasing absorbed radiation dose as well as the concentration of the natural antioxidant.     

Laccase‐mediated grafting of polyphenols onto cationized cotton fibers to impart UV protection and antioxidant activities

Enzyme‐mediated in situ functionalization of cotton fibers was studied using laccase. Caffeic acid and morin were used as reactive phenolic substrates for laccase and further employed to the modification of fiber surfaces. Laccase‐mediated oxidation and polymerization reactions of caffeic acid were monitored by ultraviolet–visible spectroscopy. During the wetting process, initial cationization of fiber surfaces using poly(diallyldimethylammonium chloride) followed by enzymatic treatment with phenolic substrates resulted ineffective polymer grafting evidenced by high color stability. Changes of fiber surface properties by polymer grafting, such as morphology and hydrophilicity/hydrophobicity, were tested using scanning electron microscopy and gravimetric absorption tests. An acceptable level of color resistance to washing stress was obtained on caffeic acid treated samples, and a high level of rubbing resistance was obtained on samples treated with both caffeic acid and morin. Regarding the ultraviolet protection test, the cationized and enzymatically functionalized samples showed a very good protection grade (ultraviolet protection factor = 25). Finally, the antioxidant activity test of the modified fibers presented an improvement for radical scavenging potential due to the phenolic compounds incorporated to cotton fibers by laccase‐mediated catalysis. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45801.     

Resistance of metallic substrates protected by an organic coating containing glass flakes

The resistance against corrosion of an epoxy-polyamine-based coating immersed in a 3 wt.% sodium chloride solution was investigated by electrochemical impedance spectroscopy (EIS). The organic coating contained glass flakes as pigment in order to enhance its barrier characteristics. The data show that this coating is more strongly adhered and exhibits higher protection characteristics when applied onto carbon steel substrates than on galvanized steel. Though the capacitance of the coating (C_C) does not show any appreciable variation with immersion time, the resistance (R_PO) of the film is observed to increase with time upon immersion. The analysis of the data sustains that the organic film behaves as a porous, non-barrier coating. Two time constants are observed even at earlier exposures, and the improved corrosion resistance developed after the coating system was exposed to the test electrolyte is considered to originate from the precipitation of corrosion products within the pores in the film.