Nano fibrillated cellulose-based foam by Pickering emulsion: Preparation,characterizations, and application as dye adsorbent

An ecofriendly and biodegradable porous structure was prepared from drying aqueous foams based on nano fibrillated cellulose (NFC), extracted from softwood pulp by subcritical water/CO₂ treatment (SC-NFC). The primary aim of this work was to use the modified SC-NFC as stabilizer for a water-based Pickering emulsion which upon drying, yielded porous cellulosic materials, a good dye adsorbent. In order to exploit the carboxymethylated SC-NFC (CMSC-NFC, with a degree of substitution of 0.35 and a charge density of 649 μeqv/g) as a stabilizer for water-based Pickering emulsion in subsequent step, an optimized quantity of octyl amine (30 mg/g of SC-NFC) was added to make them partially hydrophobic. A series of dry foam structures were prepared by varying the concentrations of treated CMSC-NFCs and 4 wt% was found to be the optimum concentration to yield foam with high porosity (99%) and low density (0.038 g/cc) along with high compression strength (0.24 MPa), superior to the conventionally extracted NFC. The foams were applied to capture as high as 98% of methylene blue dyes, making them a potential green candidate for treating industrial effluent. In addition, the dye adsorption kinetics and isotherms were found to be well suited with second order kinetics and Langmuir isotherm models.     

Hydrothermally treated chitosan spontaneously forms water-soluble spherical particles stable at a wide pH range

The authors report the spontaneous formation of water-soluble chitosan-tartaric acid (CS-TA) spherical particles. Particles are formed by heating chitosan in the presence of tartaric acid under hydrothermal conditions. Tartaric acid serves as an ionic cross-linker, a depolymerizing agent, and a particle stabilizer in aqueous phase. The CS-TA particles exhibit superior colloidal stability at a wide pH range due to their surface charge tunability, which is due to the colocalization of surface hydroxyl, amine, and carboxyl groups. At physiological pH condition, particles have zwitterionic structure as determined by the zeta potential measurements. Still, CS-TA maintains colloidal stability at neutral pH due to the abundance of surface hydroxyl groups. As a proof-of-concept study, the CS-TA particles were labeled with a model insoluble cargo (fluorescein isothiocyanate [FITC]) to demonstrate their capacity for solubilizing hydrophobic drugs. The CS-TA/FITC conjugates were found to remain well dispersed at neutral pH, while maintaining FITC fluorescence properties.     

Influence of green extraction process of nano fibrillated cellulose using subcritical water/CO2 on its properties and development of its bio composite

The study proposes a new green extraction method of producing nano fibrillated cellulose (NFC) from softwood pulp (SWP) by using subcritical water/CO₂. Subcritical water/CO₂ led to a controlled hydrolysis of SWP and the treated SWP was fibrillated by sonication to produce NFC. Effect of process parameters (time, temperature, and pressure) on the crystallinity and thermal properties of NFC was studied to optimize the process conditions for controlled hydrolysis. The influence of the extraction process on the properties of prepared NFC was studied. Nanocellulosic materials were characterized by using field emission scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, wide-angle X-ray diffraction, and thermo gravimetric analysis. The NFC obtained at optimum process conditions (100 bar, 145°C, and 30 min) showed significantly high crystallinity (66%) and high yield (75–80%) compared to the NFC prepared by conventional mechanical grinding method. The present method of producing NFC uses water and pressurized CO_2, and therefore, eliminate use of acids and chemicals. Plasticized poly vinyl alcohol (p-PVA) based nano composite with NFC shows significant improvement in thermal stability (36%), tensile strength (77%) with reduced water vapor transmission rate as compared to virgin p-PVA indicating their potential as nanofiller for making bio composites.     

Controlled drug release of 5-amino salicylic acid by poly(2-hydroxyethylmethacrylate) grafted agar

The utilization of poly (2-hydroxyethylmethacrylate) grafted agar (Ag-g-P(HEMA)) as a matrix for the controlled release of 5-aminosalicylic acid was investigated. Grafted copolymers of 2-hydroxyethylmethacrylate (HEMA) monomers on agar were synthesized by microwave assisted method. In vitro drug release studies were performed at pH values of 2 and 7 in order to investigate the possibility of pH triggered release for colon targeted drug delivery. Further, the percent grafting vs. t₅₀ (the time taken for release of 50% of the enclosed drug) value was studied and the results indicate that it may be possible to develop a programmable drug release matrix based on grafted polysaccharide. Ag-g-P(HEMA) appears to be a useful matrix for controlled release.     

Synthesis,characterization and application of novel polyacrylamide‐grafted barley

Polyacrylamide‐grafted barley (BAR‐g‐PAM) was synthesized by ceric ion‐based conventional method. The grafting of polyacrylamide chains on the polysaccharide backbone was confirmed through various physicochemical techniques such as intrinsic viscosity measurement, ¹³C‐NMR spectra, FTIR spectroscopy, elemental analysis, scanning electron microscopy morphology, thermogravimetric analysis study, number‐average molecular weight, and aqueous solubility. Furthermore, flocculation efficacy of the graft copolymers was studied in coal fine suspension through “jar test” procedure, toward its possible application as a novel flocculant for treatment of coal washery effluent. BAR‐g‐PAM is reported as a novel flocculant that can be used for bulk treatment of coal washery effluents. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41046.