Effect of titanium substitution on the structure and properties of Fe3Al-based intermetallic alloys

Substitutions (0–16 at%) of titanium for iron in Fe₃Al-based alloys rapidly solidified by chill-block melt-spinning stabilize the D0₃ and B2 ordered structures. Rapid solidification results in total suppression of D0₃ order in binary alloys, whereas alloys containing titanium have D0₃ structure. D0₃ and B2 antiphase domain size, lattice parameter and hardness increase with increasing titanium content of the alloy. The deformation mode changes from single (unit) bcc dislocation in binary alloys to two-fold superdislocation configuration in D0₃Fe₃Al-Ti alloys. Mechanical antiphase boundaries are generated by the movement of these imperfect configurations. All the alloys exhibited cleavage tensile failure. The mechanical properties are correlated with the observed structural changes.     

2,2′-oxo-1,1′-azobenzene: microbial transformation of rye (Secale cereale L.) allelochemical in field soils byAcinetobacter calcoaceticus: III

Acinetobacter calcoaceticus, a gram-negative bacterium isolated from field soil, was found to be responsible for the biotransformation of 2(3H)-benzoxazolinone (BOA) to 2,2-oxo-1,1-azobenzene (AZOB). Experiments were conducted to evaluate the transformation of BOA to AZOB by this microbe in sterile and nonsterile soil. Transformation studies with soils inoculated withA. calcoaceticus indicated that the production of AZOB increased linearly with the concentration of BOA in sterile soil and showed a quadratic trend in nonsterile soils. This also indicated that all soil types studied for the transformation experiments might containA. calcoaceticus capable of the conversion of benzoxazolinones.     

Nutritional and nutraceutical comparison of Jamaican Psidium cattleianum (strawberry guava) and Psidium guajava (common guava) fruits

Psidium cattleianum (strawberry guava) is one of many underutilised edible fruits that grow wild in Jamaica, and could potentially be commercially exploited to yield health and economic benefits. In this study, the total phenolics, proximate contents, and antioxidant, anti-inflammatory, and antimicrobial activities of P. cattleianum and P. guajava (common guava), a well-known species, were compared. Strawberry guavas were found to be superior to common guavas in antioxidant and antimicrobial activities, total phenolics and vitamin C content. They also possessed relatively high fibre content (24.9%). The hexane and ethyl acetate extracts of strawberry guavas showed cyclooxygenase-2 enzyme inhibitory activities of 18.3% and 26.5%, respectively (250 μg/mL), indicating anti-inflammatory activity. The EtOAc and MeOH extracts of P. guajava showed 56.4% (COX-2) and 44.1% (COX-1) inhibitory activity, respectively. Additionally, nine compounds were isolated from strawberry guava fruits, some of which demonstrated anti-inflammatory activity. These results indicate that strawberry guavas are beneficial for health.     

Performance and emission evaluation of a diesel engine fueled with methyl esters of rubber seed oil

Recent concerns over the environment, increasing fuel prices and scarcity of its supply have promoted the interest in development of the alternative sources for petroleum fuels. At present, biodiesel is commercially produced from the refined edible vegetable oils such as sunflower oil, palm oil and soybean oil, etc. by alkaline-catalyzed esterification process. This process is not suitable for production of biodiesel from many unrefined non-edible vegetable oils because of their high acid value. Hence, a two-step esterification method is developed to produce biodiesel from high FFA vegetable oils. The biodiesel production method consists of acid-catalyzed pretreatment followed by an alkaline-catalyzed transesterification. The important properties of methyl esters of rubber seed oil are compared with other esters and diesel. Pure rubber seed oil, diesel and biodiesel are used as fuels in the compression ignition engine and the performance and emission characteristics of the engine are analyzed. The lower blends of biodiesel increase the brake thermal efficiency and reduce the fuel consumption. The exhaust gas emissions are reduced with increase in biodiesel concentration. The experimental results proved that the use of biodiesel (produced from unrefined rubber seed oil) in compression ignition engines is a viable alternative to diesel.     

Minimization of entropy generation in flat heat pipe

A thermodynamic model of flat heat pipe is developed based on the laws of thermodynamics. Major reasons for entropy generation, which is considered as a significant parameter on heat pipe performance, are temperature difference between hot and cold reservoirs, frictional losses in the flow of working fluid, and vapor temperature and pressure drop along heat pipe. The objective of the present work is to minimize the entropy generation in a flat heat pipe. The physical situation is formulated as a non-linear programming problem with non-linear objective function and constraints. Using available software, the optimum values of selected design variables are arrived. The effect of heat load, adiabatic length, etc. on the optimum design variables and corresponding entropy generation are studied.     

Studies on structural transformation and magnetic properties in Sm2Co17 type alloys

Structural transformations and microstructural characterisation of Sm₂Co₁₇ alloys containing Fe, Cu and Zr at different stages of thermal processing have been investigated by X-ray diffraction, optical, scanning electron and transmission electron microscopes. Solution treated samples consist of a mixture of hexagonal TbCu₇ (1:7 H) and rhombohedral Th₂Zn₁₇ (2:17 R) structure types of 2:17 phase. After isothermal aging, TbCu₇ + Th₂Zn₁₇ structures transform into Th₂Zn₁₇ type structure with precipitation of Cu-rich hexagonal SmCo₅ (1:5 H) and Zr-rich platelet phases. In addition to the main phases, a soft magnetic phase of composition Zr₆(FeCo)₂₃ is formed in alloys containing higher Zr composition. Isothermal aging studies reveal that magnetic properties show a peak value when aged at 1108–1123 K for 10 h. TEM studies show cellular precipitate structure with cell interiors having 2:17 R structure, while the fully coherent cell boundaries have the 1:5 H structure. Zr-rich platelets which run across many cells and cell boundaries were found to have 1:7 H structure.     

A review on recent developments in new refrigerant mixtures for vapour compression‐based refrigeration,air‐conditioning and heat pump units

In the present paper, an attempt has been made to review the performance of new refrigerant mixtures employed in vapour compression‐based refrigeration, air‐conditioning and heat pump units. The studies reported with refrigerant mixtures are categorized into six groups as follows: (i) hydrocarbon (HC), (ii) hydroflurocarbons (HFC), (iii) HFC/HC, (iv) hydrochloroflurocarbons (HCFC), (v) carbon dioxide (R744) and (vi) ammonia (R717). This paper explores the studies reported with new refrigerant mixtures in domestic refrigerators, commercial refrigeration systems, air conditioners, heat pumps, chillers and in automobile air conditioners. In addition, the technical difficulties faced with new refrigerant mixtures, further research needs in this field and future refrigerant options for new upcoming systems have been discussed in detail. This paper concludes that HC based refrigerant mixtures are identified as a long‐term alternative to phase out the existing halogenated refrigerants in the vapour compression‐based systems. Copyright © 2010 John Wiley & Sons, Ltd.