Swift and Selective Reduction of Nitroaromatics to Aromatic Amines with Ni–Boride–Silica Catalysts System at Low Temperature

Various nitroaromatics are successfully reduced to amines with 100% conversion and selectivity in methanol at low temperature (≈5 °C), by using versatile system of 5% Ni–SiO₂ catalyst and NaBH₄ and in situ generation of Ni boride. The catalytic efficiency of Ni loading (5%, 10% and 15%) with silica or titania as support materials is investigated for reduction of nitrobenzene. The Ni–titania/NaBH₄ system recorded lower conversion and selectivity. The IR studies indicate that silica support does not have free –OH group on its surface. Thus the nickel boride is anchored to the silica to facilitate the catalytic process.     

Detection and characterization of the electron paramagnetic resonance-silent glutathionyl-5,5-dimethyl-1-pyrroline N-oxide adduct derived from redox cycling of phenoxyl radicals in model systems and HL-60 cells

Rapidly growing knowledge about the nature and behaviour of breast cancer has led to many treatment modalities. Consequently, the possibilities of individualizing the treatment of breast cancer increase. The major tool for the determination of an optimal treatment plan is the estimation of the extent of the disease: in other words, staging. As a consequence, together with the expected result of the treatment, the stage of the disease gives information on the prognosis of the patient. Current staging systems insufficiently describe the clinically important features of breast cancer with respect to management and outcome: local and regional extent, invasiveness, aggressiveness, the state of dissemination, and the effectiveness of different treatment modalities. For staging of the local and regional extent, histology plays a prominent role and should be incorporated in future staging systems. Histological workup therefore needs standardisation. Histological parameters as tumour size, grade, nodal status, and vascular invasion are also the most important prognostic factors. Many so-called biological prognostic factors are related to the invasiveness and aggressiveness (metastatic potential) of the tumour, and therefore to the prognosis of the patient. However, these factors do not necessarily predict the effectiveness of certain systemic treatments. Only if the biological foundation of a prognostic factor is completely clarified can treatment be based on this knowledge, and the factor will become a predictor for the treatment effect. Many "biological" prognostic factors do not fulfil this main criterion and are therefore not useful for clinical decision making. A clinically useful staging system covers three primary aims: (1) to guide locoregional treatment, (2) to prognosticate the chance of survival, and (3) to indicate who needs what kind of adjuvant treatment. For the conception of a new staging system the following steps should be taken: standardization of all aspects of histology, identification of regional nodal involvement, and validation of prognostic factors with respect to their predictive value to treatment outcome.     

Dielectric behavior of gelatine–glycosaminoglycans blends: An impedance analysis

The dielectric behavior of the gelatine–GAGs based blend systems has been studied to understand the dynamic behavior of the water at the protein–GAGs interfaces which are relevant for tissue engineering application. Impedance (Z) and phase have been measured as a function of frequencies from 0.01 Hz to 100 kHz. GAGs tunes the ionic charge drift which initiates polarization mechanisms through charge accumulation at structural interfaces and creates conduction currents. The admittance results showed that at high frequency, the conductivity increases with increasing GAGs concentration indicating changes in hydration shell of the gelatine by the GAGs.     

A Soluble Epoxide Hydrolase Inhibitor, 1-trifluoromethoxyphenyl-3-(1-propionylpiperidin-4-yl) Urea,Ameliorates Experimental Autoimmune Encephalomyelitis

Polyunsaturated fatty acids (PUFAs) are essential FAs for human health. Cytochrome P450 oxygenates PUFAs to produce anti-inflammatory and pain-resolving epoxy fatty acids (EpFAs) and other oxylipins whose epoxide ring is opened by the soluble epoxide hydrolase (sEH/Ephx2), resulting in the formation of toxic and pro-inflammatory vicinal diols (dihydroxy-FAs). Pharmacological inhibition of sEH is a promising strategy for the treatment of pain, inflammation, cardiovascular diseases, and other conditions. We tested the efficacy of a potent, selective sEH inhibitor, 1-trifluoromethoxyphenyl-3-(1-propionylpiperidin-4-yl) urea (TPPU), in an animal model of multiple sclerosis (MS), experimental autoimmune encephalomyelitis (EAE). Prophylactic TPPU treatment significantly ameliorated EAE without affecting circulating white blood cell counts. TPPU accumulated in the spinal cords (SCs), which was correlated with plasma TPPU concentration. Targeted lipidomics in EAE SCs and plasma identified that TPPU blocked production of dihydroxy-FAs efficiently and increased some EpFA species including 12(13)-epoxy-octadecenoic acid (12(13)-EpOME) and 17(18)-epoxy-eicosatrienoic acid (17(18)-EpETE). TPPU did not alter levels of cyclooxygenase (COX-1/2) metabolites, while it increased 12-hydroxyeicosatetraenoic acid (12-HETE) and other 12/15-lipoxygenase metabolites. These analytical results are consistent with sEH inhibitors that reduce neuroinflammation and accelerate anti-inflammatory responses, providing the possibility that sEH inhibitors could be used as a disease modifying therapy, as well as for MS-associated pain relief.     

Trivalent chromium removal from tannery effluent using kaolin‐supported bacterial biofilm of Bacillus sp isolated from chromium polluted soil

BACKGROUND: Bacterial strains belonging to the genus Bacillus, isolated from Cr‐ polluted soil (tannery sludge) were employed as consortium for Cr(III) removal from tannery effluents. Kaolin clay, a natural adsorbent, was used as supporting material for bacterial biofilm formation. The use of clay‐supported bacterial biofilm has not previously been employed for the treatment of tannery effluents containing Cr(III) salt. RESULTS: Commercial tannery effluent containing 1000 ppm initial metal ion concentration was treated in stages. The initial Cr(III) concentration of 1000 ppm was brought down to 2 ppm, a permissible level for discharge, after the fourth stage. The bacterial isolates were found to be Bacillus subtilis VITSCCr01 and Bacillus cereus VITSCCr02 by 16s rRNA gene sequencing. Batch assay and confocal laser scanning microscopy results revealed the role of kaolin as a support material in biofilm formation. Best fit was obtained with the Freundlich adsorption isotherm. The mechanism of sorption was confirmed by Fourier transform infrared (FT‐IR) spectroscopy and scanning electron microscopy–energy dispersive X‐ray spectroscopy (SEM‐EDS). CONCLUSION: Cr(III) removal from tannery effluent using low cost adsorbents such as kaolin and bacteria proved to be effective for metal concentrations ?1000 ppm; this is normally not possible using conventional treatment methods. This work has demonstrated feasible sorption of Cr(III), especially during post‐tanning operations. Copyright © 2011 Society of Chemical Industry     

Mechanical bend fatigue reliability of lead-free and halogen-free PBGA assemblies

In order to comply with impending legislative regulations in Europe (WEEE) and Japan and meet market demand for environmentally friendly products, electronics manufacturers are beginning to introduce lead-free solder and halogen-free PCBs into their products. The change of materials impacts the entire manufacturing supply chain, from component and solder-material suppliers to assembly equipment vendors. The manufacturability and reliability of several alternative lead-free alloys have examined in the literature. A majority of US based companies, working with NEMI, are selecting SnAgCu alloys, with minor compositional variations. However, much work is still required in the area of component and assembly reliability, especially in mechanical fatigue and impact loading, where the failure drivers are independent of the coefficient of thermal expansion. In this paper, the mechanical bend fatigue reliability of plastic ball grid array (PBGA) assemblies is investigated. Reliability of traditional PBGA assemblies is compared to those built with environmentally friendly materials. Experimental data is presented for four different combinations of tin-lead and lead-free solders as well as FR4 and Halogen-Free laminate substrates-TL/FR4, LF/FR4, TL/HF, and LF/HF. The fatigue life was correlated to the different failure modes. A transition in failure modes as a function of the applied load was observed. A three-dimensional parametric finite element model was developed to correlate the local PCB strains and solder joint plastic strains with the fatigue life of the assembly.     

Solid waste removes toxic liquid waste: adsorption of chromium(VI) by iron complexed protein waste

The leather processing industry generates huge amounts of wastes, both in solid and liquid form. Fleshing from animal hides/skins is one such waste that is high in protein content. In this study, raw fleshing has been complexed with iron and is used for removal of chromium(VI). The effect of pH and the initial concentration of chromium(VI) on the removal of Cr(IV) by iron treated fleshing is presented. Iron treatment is shown to greatly improve adsorption of the fleshing for hexavalent chromium. The ultimate adsorption capacity of iron treated fleshing is 51 mg of chromium(VI) per gram of fleshing. That of untreated fleshing is 9 mg/g such that iron treatment increases the adsorption capacity of fleshing by 10-fold. The measured adsorption kinetics is well described by a pseudo-second-order kinetic model. The uptake of chromium(VI) by fleshing is best described by the Langmuir adsorption isotherm model. X-ray photoelectron spectroscopic (XPS) studies show that the iron is incorporated into the protein matrix. Shifts in XPS spectra suggest that dichromate binding occurs with iron at active adsorption sites and that iron treated fleshing removes chromium(VI) without reducing it to chromium(III).     

Type, extent and use of colours in ready-to-eat (RTE) foods prepared in the non-industrial sector – a case study from Hyderabad, India

The type and extent of colours added to ready‐to‐eat (RTE) foods prepared in the non‐industrial sector of India was investigated. Of the 545 RTE foods analysed, 90% contained permitted colours, 2% contained a combination of permitted and non‐permitted colours and 8% contained only non‐permitted colours. However in RTE foods with permitted colours, 73% exceeded 100 ppm, as prescribed by the Prevention of Food Adulteration Act of India, and 27% were within the prescribed levels. Among the permitted colours, tartrazine was the most widely used colour followed by sunset yellow. The maximum concentration of colours was detected in sweet meats (18 767 ppm), non‐alcoholic beverages (9450 ppm), miscellaneous foods (6106 ppm) and hard‐boiled sugar confectioneries (3811 ppm). Among the non‐permitted colours found, rhodamine was most commonly used. Some of the foods, such as savouries and miscellaneous foods like sugar coated aniseed and almond milk, are not supposed to contain colours as per the Prevention of Food Adulteration Act, but were found to contain colours.     

An eco‐efficient rationalized leather process

BACKGROUND: The leather industry is under pressure to develop environmentally efficient leather‐making processes to comply with modern pollution and discharge legislation. Conventional leather‐processing methods are known to contribute significant pollution loads in tannery wastewaters. The rationalized process described here involves a salt‐free curing, lime and sulfide‐free beamhouse process and post‐tanning followed by tanning employing a reverse leather‐processing technique. RESULTS: Scanning electron microscopy (SEM) analysis substantiated that the grain surface, fibre separation and tight packing of fibres are similar for leathers from conventional and rationalized processes. The functional performance of the leathers is found to be on par with that of conventionally processed leathers. The rationalized leather process reduces the usage and discharge of chemicals by 68% and 82%, respectively. It also enjoys the reduction in biochemical oxygen demand (BOD), chemical oxygen demand, Cl^?, SO₄^2? and total solids loads by 58%, 62%, 95%, 66% and 85%, respectively. The rationalized process also results in reduction of water consumption and discharge and energy by 37%, 37% and 38%, respectively. CONCLUSION: The rationalized process utilizes resources efficiently with reduced environmental impact without compromising leather qualities and can be seen as being eco‐efficient compared to the conventional leather process. Copyright © 2007 Society of Chemical Industry     

Structure‐Guided Design of Thiazolidine Derivatives as Mycobacterium tuberculosis Pantothenate Synthetase Inhibitors

The pantothenate biosynthetic pathway is essential for the persistent growth and virulence of Mycobacterium tuberculosis (Mtb) and one of the enzymes in the pathway, pantothenate synthetase (PS, EC: 6.3.2.1), encoded by the panC gene, has become an appropriate target for new therapeutics to treat tuberculosis. Herein, we report nanomolar thiazolidine inhibitors of Mtb PS developed by a rational inhibitor design approach. The thiazolidine compounds were discovered by using energy‐based pharmacophore modelling and subsequent in vitro screening, which resulted in compounds with a half maximal inhibitory concentration (IC₅₀) value of (1.12±0.12) μM . These compounds were subsequently optimised by a combination of modelling and synthetic chemistry. Hit expansion of the lead by chemical synthesis led to an improved inhibitor with an IC₅₀ value of 350 nM and an Mtb minimum inhibitory concentration (MIC) of 1.55 μM . Some of these compounds also showed good activity against dormant Mtb cells.