Surface Reconstruction Engineering with Synergistic Effect of Mixed-Salt Passivation Treatment toward Efficient and Stable Perovskite Solar Cells

Surface passivation treatment is a widely used strategy to resolve trap-mediated nonradiative recombination toward high-efficiency metal-halide perovskite photovoltaics. However, a lack of passivation with mixture treatment has been investigated, as well as an in-depth understanding of its passivation mechanism. Here, a systematic study on a mixed-salt passivation strategy of formamidinium bromide (FABr) coupled with different F-substituted alkyl lengths of ammonium iodide is demonstrated. It is obtained better device performance with decreasing chain length of the F-substituted alkyl ammonium iodide in the presence of FABr. Moreover, they unraveled a synergistic passivation mechanism of the mixed-salt treatment through surface reconstruction engineering, where FABr dominates the reformation of the perovskite surface via reacting with the excess PbI₂. Meanwhile, ammonium iodide passivates the perovskite grain boundaries both on the surface and top perovskite bulk through penetration. This synergistic passivation engineer results in a high-quality perovskite surface with fewer defects and suppressed ion migration, leading to a champion efficiency of 23.5% with mixed-salt treatment. In addition, the introduction of the moisture resisted F-substituted groups presents a more hydrophobic perovskite surface, thus enabling the decorated devices with excellent long-term stability under a high humid atmosphere as well as operational conditions.     

Tunable colors and conductivity by electroless growth of Cu/Cu2O particles on sol-gel modified cellulose

Nano Research - Development of colored surfaces by formation of nano-structured aggregates is a widely used strategy in nature to color lightweight structures (e.g. butterflies) without the use of...     

Lignin from Annual Plants as Raw Material Source for Flavors and Basic Chemicals

The enzymatic conversion of lignins, possibly in combination with electrochemical oxidation, makes aromatics such as syringol, guaiacol, vanillin and catechol available in the qualities required by the fragrance industry. The lignins were obtained by soda digestion from wheat straw and Miscanthus, characterized and then converted with laccases. The overall yield amounted up to 9 wt % with a product spectrum confined to four substances. Catechol was the major product, with a fraction of ≈75 %. It can easily be isolated by extraction with acetone.     

Technology-transfer analysis of the materials research program “Matfo”

The commercial success of the German Federal Ministry's materials research program “Mafto” (1985–1994) was recently evaluated to determine the effectiveness of the direct-funding model in supporting innovative industrial research. Based on the results of a questionnaire, where a 97% return rate was achieved, it was found that the results obtained in 27% of the projects have already been commercialized to some degree, for 26% of the projects a commercialization of the results is planned but has not yet taken place, and for 54% of the projects no commercialization is planned. This study included only projects where at least four years had elapsed since project completion. The reasons why scientifically and technically successfully projects were not commercialized were also surveyed.     

Pharmacokinetic and bioequivalence study of two gemfibrozil preparations

A comparative pharmacokinetic study has been performed in 19 healthy male volunteers in a single-dose, randomized, two way cross-over design with two preparations of gemfibrozil (CAS 25812-30-0) capsules each of them containing 300 mg active ingredient. The test preparation was Innogem 300 mg capsule. The plasma concentration of gemfibrozil was determined by a validated HPLC-UV analytical method. The statistical comparison of individual pharmacokinetic parameters (AUC0-16, AUC0-oc Cmax, tmax) of the two capsule preparations was performed by three-way analysis of variance (ANOVA), Wilcoxon's, Westlake's, Schuirmann's and Hanck-Anderson's method as well as by the calculation of confidence intervals on the ratio of test/reference. The relative bioavailability of the test preparation with respect to the reference preparation in terms of the AUC0-oc was 104.06 +/- 21.61%. No statistically significant difference was found between the pharmacokinetic parameters, calculated from plasma concentration-time curves, indicating that the two preparations were bioequivalent.     

Optical and structural properties of MOVPE grown GaxIn1−xAs/InP strained multiple quantum well atructures

This paper presents a study of the structural and optical properties of strained GaInAs/ InP multiple quantum well (MQW) structures fabricated by LP-MOVPE. The composition of the Ga _x In_1−x As films ranged fromx = 0.17 tox = 1.0 and was determined by sputtered neutral mass spectrometry (SNMS) on thick layers. The structures of the MQW samples with well widths from 1.5 to 5 nm were investigated by high resolution x-ray diffraction (HR-XRD). Simulations of the diffraction patterns showed that transition layers of approximately 2 monolayer (ML) thickness with high lattice mismatch exist at the interfaces. Photoluminescence (PL) measurements indicate well widths of a multiple of a monolayer with local variations of one monolayer. The PL peak energies vary smoothly with the Ga concentration. These results were confirmed by optical absorption measurements.     

Microwave cavity perturbation technique: Part I: Principles

This report reviews the analysis used to extract the complex conductivity of a compound from a microwave cavity perturbation measurement. We intend to present a generalized treatment valid for any spheroidally shaped sample of arbitrary conductivity which is placed at either the electric or magnetic field antinode of the cavity. To begin with, we establish the relationship between the measured parameters and the conductivity for a spherical sample. Next, we extend these results to the case of spheroids; and for the first time, we cover all different configurations that one can possibly use to study an arbitrary conducting sample inside a cavity: in particular, all possible orientations of the sample with respect to the applied field are solved.     

Formation of droplets on Si surfaces bombarded by In from a capillary type liquid metal ion source

Droplet formation on Si surfaces bombarded by 10 keV beams from a liquid metal indium ion source has been observed. It has been verified that excess indium is transported in the ion beam, probably in the form of charged droplets. SIMS, SEM and RBS techniques have been used to study the distribution of droplets at the surface. At the specified ion source operating conditions, equilibrium droplet coverage is of the order of 25%. Individual droplets have an average diameter of 0.35 ωm and an average height of 2.2 nm. At a bombardment current density of 0.1 mA cm^?2, equilibrium coverage is reached in about 1 s.     

Computations of Explosive Boiling in Microgravity

Dynamics of the explosive growth of a vapor bubble in microgravity is investigated by direct numerical simulation. A front tracking/finite difference technique is used to solve for the velocity and the temperature field in both phases and to account for inertia, viscosity, and surface deformation. The method is validated by comparison of the numerical results with the available analytical formulations such as the evaporation of a one-dimensional liquid/vapor interface, frequency of oscillations of capillary waves, and other numerical results. Evolution of a three-dimensional vapor nucleus during explosive boiling is followed and a fine scale structure similar to experimental results is observed. Two-dimensional simulations yield a similar qualitative instability growth.     

Efficient reconstruction from non-uniform point sets

We propose a method for non-uniform reconstruction of 3D scalar data. Typically, radial basis functions, trigonometric polynomials or shift-invariant functions are used in the functional approximation of 3D data. We adopt a variational approach for the reconstruction and rendering of 3D data. The principle idea is based on data fitting via thin-plate splines. An approximation by B-splines offers more compact support for fast reconstruction. We adopt this method for large datasets by introducing a block-based reconstruction approach. This makes the method practical for large datasets. Our reconstruction will be smooth across blocks. We give reconstruction measurements as error estimations based on different parameter settings and also an insight on the computational effort. We show that the block size used in reconstruction has a negligible effect on the reconstruction error. Finally we show rendering results to emphasize the quality of this 3D reconstruction technique.