Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications

Among the thermoplastic elastomers that play important roles in the polymer industry due to their superior properties, styrene-based species and polyurethane block copolymers are of great interest. Poly(styrene-ethylene-butadiene-styrene) (SEBS) as a triblock copolymer seems to have the potential to meet many demands in different applications due to various industrial requirements where durability, biocompatibility, breaking elongation, and interfacial adhesion are important. In this study, the SEBS triblock copolymer was functionalized with natural (Satureja hortensis, SH) and synthetic (nanopowder, TiO₂) agents to obtain composite nanofibers by electrospinning and electrospraying methods for use in biomedical and water filtration applications. The results were compared with thermoplastic polyurethane (TPU) composite nanofibers, which are commonly used in these fields. Here, functionalized SEBS nanofibers exhibited antibacterial effect while at the same time improving cell viability. In addition, because of successful water filtration by using the SEBS composite nanofibers, the material may have a good potential to be used comparably to TPU for the application.     

The effects of periodontal therapy on serum antibody levels to Actinobacillus actinomycetemcomitans and Porphyromonas gingivalis (part II)

Levels of IgG and IgM antibodies were estimated against Actinobacillus actinomycetemcomitans and Porphyromonas gingivalis were determined by enzyme linked immunosorbent assay (ELISA) in 17 patients with juvenile periodontitis, 15 with adult periodontitis and 24 healthy controls at the beginning of treatment and 3 to 8 months after periodontal therapy. After treatment, antibodies to A. actinomycetemcomitans and P.gingivalis had decreased in patients, but the levels were still significantly higher than in healthy controls. Whether or not an of antibody level against a specific bacteria changes after periodontal treatment is however, still debatable.     

Fine grinding of thermoplastics by high speed friction grinding assisted by guar gum

High speed friction grinding has been used to grind plant and food substances in water but never been explored for grinding of thermoplastics like polylactic acid (PLA), low and high density polyethylene and polypropylene. Such grinding was investigated in this work and was made possible by using 0.5% guar gum solution instead of just water because increasing the viscosity of water reduced their settling and the speed of passing through the grinder. Tensile, flexural, and impact strengths of the plastics were studied and higher grinding efficiency of PLA could be explained by its low elongation-at-break compared to low density polyethylene, high density polyethylene, and polypropylene. The microplastics (2000–45 μm) were studied for mass and particle size distributions and by scanning electron microscopy, ¹³C CP/MAS NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. In addition, viscosity of guar gum and contact angles was measured. This new technology can produce finely ground microplastics (710–45 μm) for a variety of applications.     

Edge cracks in a transversely isotropic hollow cylinder

The analytical solution for the linear elastic, axisymmetric problem of inner and outer edge cracks in a transversely isotropic infinitely long hollow cylinder is considered. The z = 0 plane on which the crack lies is a plane of symmetry. The loading is uniform crack surface pressure. The mixed boundary value problem is reduced to a singular integral equation where the unknown is the derivative of the crack surface displacement. An asymptotic analysis is done to derive the generalized Cauchy kernel associated with edge cracks. It is shown that the stress intensity factor is a function of three material parameters. The singular integral equation is solved numerically. Stress intensity factors are presented for various values of material and geometric parameters.     

Towards quality requirements via animated formal specifications

Assuring a high quality requirements specification document involves both an early validation process and an increased level of participation. An approach and its supporting environment which combines the benefits of a formal system specification and its subsequent execution via a rapid prototype is reported. The environment assists in the construction, clarification, validation and visualisation of a formal specification. An illustrative case study demonstrates the consequences of assertions about system properties at this early stage of software development. Our approach involves the pragmatic combination of technical benefits of formal systems engineering based techniques with the context‐sensitive notions of increased participation of both developer and user stakeholders to move us closer towards a quality requirements specification document.     

Performance of teetered bed separator for non-coal applications

In the present investigation, the effect of the most important process variables, which are teeter water velocity (TW) and pressure set point (SP), on the classification and beneficiation performance of a laboratory-scale teetered bed separator (TBS) was evaluated and discussed. Pure silica sand, magnetite concentrate and their artificial mixture were used to observe the effect of mineral density. Classification test results revealed that separation cut size linearly increases with increasing TW and SP. From the beneficiation studies and the size-by-size chemical analysis of artificial mixture, it can be concluded that significant removal of silica is possible by employing TBS.     

Carboxymethyl sago pulp/chitosan hydrogel as an immobilization medium for activated sludge for p-nitrophenol biodegradation

In this study, carboxymethyl sago pulp (CMSP) derived from sago waste was successfully crosslinked with ferric ions in the presence of chitosan forming a novel immobilization matrix for p-nitrophenol (PNP)-acclimated activated sludge. On the basis of the shortest biodegradation time of PNP, the optimized operational conditions of immobilization were found to be: 7 w/v% CMSP, 9 g L⁻¹ of activated sludge, 0.1 M ferric ion, and 15 min of crosslinking time. Observable inhibited PNP biodegradation was exhibited by the suspended activated sludge at the initial PNP concentration of 400 mg L⁻¹. In contrast, complete mineralization was achieved by the CMSP/chitosan-immobilized activated sludge (CMSP/Ch-AS) beads. The results revealed the important role of CMSP/Ch hydrogel in protecting activated sludge from the toxicity of PNP. The CMSP/Ch-AS beads could be reused consecutively up to three and two cycles, respectively, for the biodegradation of PNP at 200 and 400 mg L⁻¹, with the attainment of more than 99% of PNP removal at each cycle. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47531.     

Stochastic resonance in binary composite hypothesis-testing problems in the Neyman–Pearson framework

Performance of some suboptimal detectors can be enhanced by adding independent noise to their inputs via the stochastic resonance (SR) effect. In this paper, the effects of SR are studied for binary composite hypothesis-testing problems. A Neyman–Pearson framework is considered, and the maximization of detection performance under a constraint on the maximum probability of false-alarm is studied. The detection performance is quantified in terms of the sum, the minimum, and the maximum of the detection probabilities corresponding to possible parameter values under the alternative hypothesis. Sufficient conditions under which detection performance can or cannot be improved are derived for each case. Also, statistical characterization of optimal additive noise is provided, and the resulting false-alarm probabilities and bounds on detection performance are investigated. In addition, optimization theoretic approaches to obtaining the probability distribution of optimal additive noise are discussed. Finally, a detection example is presented to investigate the theoretical results.