Magnetically Modified Waste Bark of Aegle marmelos Tree as a Promising Biosorbent for Uranium(VI) Sorption

Radiochemistry - Magnetically modified waste bark of the Aegle marmelos tree was prepared by using green synthesis method and was used in a batch system for U(VI) removal from aqueous solution. The...     

Impact of Climate Change on Future Flood Susceptibility: an Evaluation Based on Deep Learning Algorithms and GCM Model

Floods are common and recurring natural hazards which damages is the destruction for society. Several regions of the world with different climatic conditions face the challenge of floods in different magnitudes. Here we estimate flood susceptibility based on Analytical neural network (ANN), Deep learning neural network (DLNN) and Deep boost (DB) algorithm approach. We also attempt to estimate the future rainfall scenario, using the General circulation model (GCM) with its ensemble. The Representative concentration pathway (RCP) scenario is employed for estimating the future rainfall in more an authentic way. The validation of all models was done with considering different indices and the results show that the DB model is most optimal as compared to the other models. According to the DB model, the spatial coverage of very low, low, moderate, high and very high flood prone region is 68.20%, 9.48%, 5.64%, 7.34% and 9.33% respectively. The approach and results in this research would be beneficial to take the decision in managing this natural hazard in a more efficient way.

     

Nonlinear model predictive control with polytopic invariant sets

Ellipsoidal invariant sets have been widely used as target sets in model predictive control (MPC). These sets can be computed by constructing appropriate linear difference inclusions together with additional constraints to ensure that the ellipsoid lies within a given inclusion polytope. The choice of inclusion polytope has a significant effect on the size of the target ellipsoid, but the optimal inclusion polytope cannot in general be computed systematically. This paper shows that use of polytopic invariant sets overcomes this difficulty, allowing larger stabilizable sets without loss of performance. In the interests of online efficiency, consideration is focused on interpolation-based MPC.     

Theoretical investigation of penetration characteristics in gas metal-arc welding using finite element method

In the modeling of the gas metal-arc (GMA) welding process, heat inputs to the workpiece by the arc and the metal transfers have been considered separately. The heat energy delivered due to the metal transfer has been approximated in the form of a cylindrical volumetric heat source, whose dimensions of the radius and the height are dependent on the molten metal droplet characteristics. The pinch instability theory (PIT) and the static force balance theory (SFBT) of drop detachment have independently been used to obtain the expressions for various characteristics of the drop,i.e., the drop radius, the drop velocity, and the drop frequency at various welding parameters. The occurrence or the nonoccurrence of finger penetration, routinely found in the GMA welding at high welding currents, has been satisfactorily explained by the cylindrical heat source model. The effect of various welding parameters,e.g., the welding current, the wire radiusetc., on the weld bead penetration characteristics has been investigated. In this modeling effort, the heat conduction equation has been solved in three dimensions.     

Effect of temperature on the optical and electro-optical properties of poly(methyl methacrylate)/E7 polymer-dispersed liquid crystal composites

Experiments on the effect of temperature on the optical and electro-optical behaviors of polymer-dispersed liquid crystals (PDLCs) are considered. Composite films composed of poly(methyl methacrylate) (PMMA) and the nematic-type liquid crystal (LC) E7 were prepared by solvent casting in chloroform. The PDLC film contained droplets of E7 from 10 to 80 wt % in a PMMA matrix. Morphological studies illustrated the formation of isolated droplets of LC due to phase separation, and their homogeneous distribution increased with increasing E7 content. Thermo-optical studies showed an increase in the nematic–isotropic transition temperature of composites, which indicated preferential solvation during the phase-separation process. The electro-optical characteristics were studied under the conditions of an externally applied square wave electric field with a He–Ne laser (λ = 632.8 nm) as a light source. The responses improved as the E7 content in PMMA increased. Semipermanent memory effects were noticed in composites at higher temperatures. Changes in the transmittance due to thermal variations provided the possibility of using such a device as a temperature sensor. The results obtained indicate that under these experimental conditions, the output can be controlled to the desired level by the selection of a suitable loading of LC to prepare PDLC electro-optically active composite films with a response time on the order of only a few milliseconds. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of polymeric pour point depressants for Nada crude oil (Gujarat,India) and its impact on oil rheology

Five flow improvers have been synthesized to study rheological properties of Nada crude oil (Gujarat, India). Anhydride copolymers were prepared making use of the copolymerization of acrylates of different alkyls with maleic anhydride and the Poly (n-alkyl acrylates-co-N-hexadecylmaleimide) were prepared by the reaction of copolymer with hexadecylamine. The additives were purified and characterized by FTIR, GPC. The prepared polymeric additives shows dual function both as wax dispersants and flow improvers and all of them acts as good pour point depressants. Yield stress and the viscosity of the crude oil at different temperatures and concentrations of additives were evaluated by zero friction advanced rheometer AR-500 of TA instrument. Comparison of morphologies and structures of wax crystals or aggregates in waxy crude oils beneficiated with and without a PPD was also done by micro photographic studies which show the modification in wax crystal morphology due to additives.     

Testing of box-type solar cooker: Second figure of merit F2 and its variation with load and number of pots

The performance of a box-type solar cooker can be represented in terms of two figures of merit, F₁ and F₂. The second figure F₂ is a controlling factor in the sensible heating of a load. The present work validates F₂ by computing this figure from experimental data by two different procedures and comparing the results. An attempt has also been made to provide some guidelines for selecting a suitable temperature interval for determination of F₂. The results of some experiments to study the effect of number of pots and the load on F₂ have also been presented. It is recommended that for standardization tests should be conducted at full load.     

Crystal structure,phonon modes,and bond characteristics of AgPb2B2V3O12 (B = Mg,Zn) microwave ceramics

AgPb₂B₂V₃O₁₂ (B = Mg, Zn) ceramics with low sintering temperature were synthesized via the conventional solid-state reaction route. Rietveld refinements of the X-ray diffraction patterns confirm cubic symmetry with space group . The number of observed vibrational modes and those predicted by group theoretical calculations also confirm the space group. At the optimum sintering temperature of 750°C/4 hours, AgPb₂Mg₂V₃O₁₂ has a relative permittivity of 23.3 ± 0.2, unloaded quality factor () of 26 900 ± 500 GHz (), and temperature coefficient of resonant frequency of 19.3 ± 1 ppm/°C, while AgPb₂Zn₂V₃O₁₂ has the corresponding values of 26.4 ± 0.2, 28 400 ± 500 GHz () and –18.4 ± 1 ppm/°C at 590°C/4 hours. Microwave dielectric properties of a few reported garnets and Pb₂AgB₂V₃O₁₂ (B = Mg, Zn) ceramics were correlated with their intrinsic characteristics such as the Raman shifts as well as width of A_1g Raman bands. Higher quality factor was obtained for lower full width at half-maxima (FWHMs) values of A_1g modes. The increase in B-site bond valence contributes to high and low |τ_f| with the substitution of Zn²⁺ by Mg²⁺. Furthermore, the high ionic polarizability and unit cell volume with Zn²⁺substitution contribute to increased relative permittivity.     

Development of new encryption system using Brownian motion based diffusion

Multimedia Tools and Applications - A new cryptographic model is proposed incorporating intertwining logistic map based confusion process and two dimensional Brownian Motion based diffusion...