Lattice-Dome Design Using a Knowledge-Based System Approach

In the design of lattice domes, design engineers need expertise in areas such as configuration processing, nonlinear analysis, and optimization. These are extensive numerical, iterative, and time-consuming processes that are prone to error without an integrated design tool. This article presents the application of a knowledge-based system in solving lattice-dome design problems. An operational prototype knowledge-based system, LADOME, has been developed by employing the combined knowledge representation approach, which uses rules, procedural methods, and an object-oriented blackboard concept. The system's objective is to assist engineers in lattice-dome design by integrating all design tasks into a single computer-aided environment with implementation of the knowledge-based system approach. For system verification, results from design examples are presented.     

Elaborative verbal rehearsals and college students' cognitive performance.

Two experiments were conducted to determine the potential of elaborative verbal rehearsal (EVR) as a learning strategy for high-risk college students. In Exp 1, a correlational inquiry was used to explore the relation between Ss' EVRs and their overall test performance. Sixty-four Ss studied an extended text, prepared an EVR, and then took the test. There were significant correlations between the quality of Ss' EVRs and their overall test performance. In Exp 2, 50 Ss were trained to produce either EVRs or verbatim rehearsals and then took the same test in immediate and delayed conditions. The EVR Ss performed significantly better on almost every variable. EVRs appear to be a powerful learning strategy for high-risk students. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Grafting polymerization of 2‐[3‐(2h‐benzotriazol‐2‐yl)‐4‐hydroxyphenyl]ethyl methacrylate on vinyltriethoxysilane‐treated cotton for the preparation of ultraviolet‐protective fabrics

Vinyltriethoxysilane was used to modify the surface of cotton to provide polymerizable vinyl groups on the fiber surface. An ultraviolet‐absorbing monomer, 2‐[3‐(2H‐benzotriazol‐2‐yl)‐4‐hydroxyphenyl]ethyl methacrylate, was polymerized on the vinyltriethoxysilane‐treated fabric to prepare ultraviolet‐protective cotton. The effects of the amounts of the solvent, silane coupling agent, and 2‐[3‐(2H‐benzotriazol‐2‐yl)‐4‐hydroxyphenyl]ethyl methacrylate on the surface morphology and ultraviolet‐protection factor of the treated cotton fabric were investigated. With a suitable process, poly{2‐[3‐(2H‐benzotriazol‐2‐yl)‐4‐hydroxyphenyl]ethyl methacrylate} was successfully coated onto the fabric, and it significantly reduced ultraviolet transmission through the fabric, resulting in a cotton fabric with excellent ultraviolet‐protection properties. The use of a silane coupling agent helped to ensure a polymer coating with good uniformity and good resistance to washing. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Production and characterization of biodegradable terpolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-4-hydroxybutyrate) by Alcaligenes sp. A-04

The production of the terpolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-4-hydroxybutyrate), P(3HB-co-3HV-co-4HB), by Alcaligenes sp. A-04 was investigated to determine the superior biodegradable polymer properties over those of poly(3-hydroxybutyrate), P(3HB), and its copolymers. The highest terpolymer content of 68% (w/w) was produced by Alcaligenes sp. A-04 at 60 h by shake-flask cultivation. The terpolymer with 93 mol% 4HB mole fraction units was produced when the cultivation time was extended to 96 h. Moreover, it was found that Alcaligenes sp. A-04 could utilize 1,4-butanediol for the synthesis of 3HB and 4HB monomers as well as the sodium salt of 4-hydroxybutyrate. The terpolymer content was 30% (w/w) and the composition was P(33%3HB-co-16%3HV-co-51%4HB). Next, terpolymers with 4HB mole fraction units ranging from 50 to 90 mol% were produced by varying the medium composition and cultivation time. The thermal and mechanical properties of the resulting terpolymers were different from those of the copolymers with a similar mole fraction of monomer units. The terpolymer P(4%3HB-co-3%3HV-co-93%4HB) showed an elongation of 430%, a toughness of 33 MPa, and Young's modulus of 127 MPa similar to those of low-density polyethylene. The terpolymer P(11%3HB-co-34%3HV-co-55%4HB) showed Young's Modulus of 618 MPa similar to that of polypropylene.     

Pineapple leaf fiber reinforced thermoplastic composites: Effects of fiber length and fiber content on their characteristics

Pineapple leaf fiber (PALF) was used as a reinforcement in polyolefins. Polypropylene (PP) and low‐density polyethylene (LDPE) composites with different fiber lengths (long and short fibers) and fiber contents (0–25%) were prepared and characterized. The results showed that the tensile strength of the composites increased when the PALF contents were increased. It was observed that the composites containing long fiber PALF were stronger than the short fiber composites as determined by greater tensile strength. An SEM study on the tensile fractured surface confirmed the homogeneous dispersion of the long fibers in the polymer matrixes better than dispersion of the short fibers. The unidirectional arrangement of the long fibers provided good interfacial bonding between the PALF and polymer which was a crucial factor in achieving high strength composites. Reduction in crystallinity of the composites, as evident from XRD and DSC studies suggested that the reinforcing effect of PALF played an important role in enhancing their mechanical strength. From the rule of mixtures, the stress efficiency factors of the composite strength could be calculated. The stress efficiency factors of LDPE were greater than those of PP. This would possibly explain why the high modulus fiber (PALF) had better load transfers to the ductile matrix of LDPE than the brittle matrix of PP. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Organosulfonic acid-functionalized mesoporous composites based on natural rubber and hexagonal mesoporous silica

This study is the first report on synthesis, characterization and catalytic application of propylsulfonic acid-functionalized mesoporous composites based on natural rubber (NR) and hexagonal mesoporous silica (HMS). In comparison with propylsulfonic acid-functionalized HMS (HMS-SO₃H), a series of NR/HMS-SO₃H composites were prepared via an in situ sol–gel process using tetrahydrofuran as the synthesis media. Tetraethylorthosilicate as the silica source, was simultaneously condensed with 3-mercaptopropyltrimethoxysilane in a solution of NR followed by oxidation with hydrogen peroxide to achieve the mesoporous composites containing propylsulfonic acid groups. Fourier-transform infrared spectroscopy and ²⁹Si MAS nuclear magnetic resonance spectroscopy results verified that the silica surfaces of the NR/HMS-SO₃H composites were functionalized with propylsulfonic acid groups and covered with NR molecules. After the incorporation of NR and organo-functional group into HMS, the hexagonal mesostructure remained intact concomitantly with an increased framework wall thickness and unit cell size, as evidenced by the X-ray powder diffraction analysis. Scanning electron microscopy analysis indicated a high interparticle porosity of NR/HMS-SO₃H composites. The textural properties of NR/HMS-SO₃H were affected by the amount of MPTMS loading to a smaller extent than that of HMS-SO₃H. NR/HMS-SO₃H exhibited higher hydrophobicity than HMS-SO₃H, as revealed by H₂O adsorption–desorption measurements. Moreover, the NR/HMS-SO₃H catalysts possessed a superior specific activity to HMS-SO₃H in the esterification of lauric acid with ethanol, resulting in a higher conversion level.     

Effects of KF Loading on Mg–Al Mixed Oxides for the Selective Synthesis of Trimethylolpropane Triesters

A series of Mg–Al hydrotalcites (HTCs) calcined at different temperatures were evaluated for their suitability as solid base catalysts for the selective synthesis of trimethylolpropane triesters (TMPTEs) via transesterification of trimethylolpropane (TMP) with a mixture of C₈–C₁₀ fatty acid methyl esters (FAMEs). The effect of potassium fluoride (KF) loading of the calcined HTCs on the physicochemical and catalytic properties of the materials attained was ascertained. Using a 5?wt% catalyst loading and a FAME:TMP molar ratio of 3.5:1 at 170°C for 8?h, the Mg–Al mixed oxide obtained by calcining HTC at 500°C (HTC-500) gave the highest TMPTE selectivity and FAME conversion. Impregnating HTC-500 with 10?wt% KF (KF/HTC-500) generated strongly basic KMgF₃, KOH, K₂O, and coordinatively unsaturated F^? sites. The FAME conversion and TMPTE yield obtained over different HTC and KF/HTC-500 catalysts depended on their total basicity, where a basic strength of 15?H_{_}?3, a common homogeneous base for the polyol ester production.     

Effect of fiber surface modification on the mechanical properties of sisal fiber‐reinforced benzoxazine/epoxy composites based on aliphatic diamine benzoxazine

Sisal fibers were incorporated into a mixture of benzoxazine and bisphenol A type epoxy resins to form a unidirectionally reinforced composite. Surface modifications of the sisal fibers were carried out with sodium hydroxide, γ‐aminopropyltrimethoxysilane, and γ‐glycidoxypropyltrimethoxysilane. The surface treatments led to changes in the morphology, chemical groups, and hydrophilicity of the fibers. The effect of the fiber surface treatments on the fiber–matrix interfacial adhesion and mechanical properties of the composites were also studied. The results showed that surface treatments with sodium hydroxide and a silane coupling agent led to improved fiber–matrix adhesion; this could be seen in the scanning electron micrographs of the fractured surfaces from mechanical testing and the reduction in the impact strength of the composites made from treated fibers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007