Enhanced radiative efficiency in GaN quantum dots grown by molecular beam epitaxy

Self-assembled GaN quantum dots (QDs), grown on AlN by molecular beam epitaxy, were investigated by time-resolved photoluminescence spectroscopy. We investigate the emission mechanism in GaN QDs by comparing the carrier recombination dynamics in single and multiple period QDs. At 100 K, the PL decay time in single period QD structures is considerably shorter than in stacked QDs. Compared to single period QDs, the room temperature PL efficiency is considerably enhanced in 20 period QDs due to the reduction in nonradiative recombination processes.     

Unified modeling technique for high-viscosity,melt-phase,condensation polymer reactors

Mathematical models for chemical reaction and mass transfer occurring in the manufacture of high-viscosity condensation polymers are considered. A preliminary study indicates that several diverse models can be represented using a single formula based upon an effectiveness factor. The effectiveness factor is shown to depend upon a ratio of time scales of mixing and reaction. The formula giving the effectiveness factor in terms of the time scales ratio is shown to depend upon mixing assumptions only. Starting with a mixing-cell model, a new modeling framework is developed and shown to include the previous models as special cases. The framework is free of inherent mixing assumptions and can be applied to a wide variety of situations once the mixing characteristics are specified. © 1993 John Wiley & Sons, Inc.     

Developing a virtual machining model to generate MTConnect machine-monitoring data from STEP-NC

The ability to predict performance of manufacturing equipment during early stages of process planning is vital for improving efficiency of manufacturing processes. In the metal cutting industry, measurement of machining performance is usually carried out by collecting machine-monitoring data that record the machine tool’s actions (e.g. coordinates of axis location and power consumption). Understanding the impacts of process planning decisions is central to the enhancement of the machining performance. However, current methodologies lack the necessary models and tools to predict impacts of process planning decisions on the machining performance. This paper presents the development of a virtual machining model (called STEP2M model) that generates machine-monitoring data from process planning data. The STEP2M model builds upon a physical model-based analysis for the sources of energy on a machine tool, and adopts STEP-NC and MTConnect standardised interfaces to represent process planning and machine-monitoring data. We have developed a prototype system for 2-axis turning operation and validated the system by conducting an experiment using a Computer Numerical Control lathe. The virtual machining model presented in this paper enables process planners to analyse machining performance through virtual measurement and to perform interoperable data communication through standardised interfaces.     

Zodiac: A history-based interactive video authoring system

Easy-to-use audio/video authoring tools play a crucial role in moving multimedia software from research curiosity to mainstream applications. However, research in multimedia authoring systems has rarely been documented in the literature. This paper describes the design and implementation of an interactive video authoring system called Zodiac, which employs an innovative edit history abstraction to support several unique editing features not found in existing commercial and research video editing systems. Zodiac provides users a conceptually clean and semantically powerful branching history model of edit operations to organize the authoring process, and to navigate among versions of authored documents. In addition, by analyzing the edit history, Zodiac is able to reliably detect a composed video stream's shot and scene boundaries, which facilitates interactive video browsing. Zodiac also features a video object annotation capability that allows users to associate annotations to moving objects in a video sequence. The annotations themselves could be text, image, audio, or video. Zodiac is built on top of MMFS, a file system specifically designed for interactive multimedia development environments, and implements an internal buffer manager that supports transparent lossless compression/decompression. Shot/scene detection, video object annotation, and buffer management all exploit the edit history information for performance optimization.     

A simple and efficient sun tracking mechanism using programmable logic controller

To increase the unit area illumination of solar ray on PV panel, it is required to track the sun throughout the day. So to reach the goal various type of sun tracking mechanism is already developed but in this paper we designed two different types of sun tracking mechanism: single axis and dual axis tracking using programmable logic controller (PLC) as it has numbers of unique advantages like??it is faster, reliable, requires less maintenance and reprogrammable. A comparative study between those two systems is also presented in this paper. The whole system has been designed and tested using GE, FANUC PLC.     

Predictive Thermal Inactivation Model for Effects and Interactions of Temperature, NaCl, Sodium Pyrophosphate, and Sodium Lactate on Listeria monocytogenes in Ground Beef

The effects and interactions of heating temperature (60 °C to 73.9 °C), salt (0.0 % to 4.5 %?w/v), sodium pyrophosphate (0.0 % to 0.5 %?w/v), and sodium lactate (0.0 % to 4.5 %?w/v) on the heat resistance of a five-strain mixture of Listeria monocytogenes in 75 % lean ground beef were examined. Meat samples in sterile filtered stomacher bags were heated in a temperature controlled waterbath to determine thermal death times. The recovery medium was tryptic soy agar supplemented with 0.6 % yeast extract and 1 % sodium pyruvate. Weibull survival functions were employed to model the primary survival curves. Then, survival curve-specific estimated parameter values obtained from the Weibull model were used for determining a secondary model. The results indicate that temperature and salt have a large impact on the inactivation kinetics of L. monocytogenes, while sodium lactate (NaL) has an impact in the presence of salt. The model presented in this paper for predicting inactivation of L. monocytogenes can be used as an aid in designing lethality treatments meant to control the presence of this pathogen in ready-to-eat products.     

Structural and Luminescence Studies on Barium Sodium Borosilicate Glasses Containing Uranium Oxides

Barium sodium borosilicate glasses containing different amounts of uranium oxides were prepared by conventional melt quench method and investigated for their structural aspects by ²⁹Si and ¹¹B MAS NMR technique combined with steady‐state luminescence and lifetime measurements. Based on MAS NMR studies, it is confirmed that uranium ions act as network modifier up to 15 wt% and beyond which a separate uranium containing phase is formed. From the luminescence studies, it is inferred that uranyl species is in a highly distorted environment. For more than 15 wt% uranium oxide incorporation, weaker U–O–U linkages are formed at the expense stronger U–O–Si/B linkages, as suggested by the excited state lifetime value of the uranyl species as well as red shift in emission peak maximum. For glass samples containing more than 25 wt% uranium oxides, crystalline barium uranium silicate gets phase separated from glass matrix as confirmed by XRD studies.     

Reductionin Listeria monocytogenes,Salmonella enterica and Escherichia coli O157:H7 in vitro and on tomato by sophorolipid and sanitiser as affected by temperature and storage time

Increased consumption of produce by consumers has been attributed to perceived health benefits of postharvest produce. Pathogen control is crucial because periodic occurrences and contamination of tomato and leafy greens have exacerbated food safety risks for consumers. We investigated the effects of temperatures (5 and 25 °C), storage time (30 min and 24 h) for inactivation of Listeria monocytogenes, Salmonella enterica and Escherichia coli O157:H7 by sophorolipid (SL‐p) produced fermentatively using palmitic acid as a co‐substrate at different concentrations in vitro. Reduction in pathogenic bacteria on grape tomato by SL‐p, sanitiser (Lovit) and combinations of SL‐p and sanitiser was determined. Temperature and storage time significantly (P < 0.05) affected pathogen inactivations by SL‐p as pathogen reductions were greater at 25 °C and 24 h than at 5 °C and 30 min of storage. L. monocytogenes was the most sensitive to SL‐p treatment as reductions of 5 log relative to untreated controls were attained at 0.12% of SL‐p. Significant reductions in S. enterica (1.91–3.85 logs) and E. coli O157:H7 (0.87–4.09 logs) were recorded at 2–5% of SL‐p. Lower populations of Salmonella and E. coli O157:H7 were inactivated than L. monocytogenes. On grape tomato, pathogen populations inactivated increased at higher SL‐p levels at 25 °C. Sanitiser and sanitiser + SL‐p reduced bacterial populations on tomato by 5.29–5.76 logs and 0.71–3.3.66 logs, respectively. These results imply the interactions of temperature, storage time and SL‐p significantly (P < 0.05) affected pathogen strain reductions. The combination of SL‐p with sanitiser led to synergistic effect on E. coli O157:H7, but not L. monocytogenes and S. enterica.     

Printed circuit technology for fabrication of plastic-based microfluidic devices

One of the primary advantages of using plastic-based substrates for microfluidic systems is the ease with which devices can be fabricated with minimal dependence on specialized laboratory equipment. These devices are often produced using soft lithography techniques to cast replicas of a rigid mold or master incorporating a negative image of the desired surface structures. Conventional photolithographic micromachining processes are typically used to construct these masters in either thick photoresist, etched silicon, or etched glass substrates. The speed at which new masters can be produced using these techniques, however, can be relatively slow and often limits the rate at which new device designs can be built and tested. In this paper, we show that inexpensive photosensitized copper clad circuit board substrates can be employed to produce master molds using conventional printed circuit technology. This process offers the benefits of parallel fabrication associated with photolithography without the need for cleanroom facilities, thereby providing a degree of speed and simplicity that allows microfluidic master molds with well-defined and reproducible structural features to be constructed in approximately 30 min in any laboratory. Precise control of channel heights ranging from 15 to 120 microm can be easily achieved through selection of the appropriate copper layer thickness, and channel widths as small as 50 microm can be reproducibly obtained. We use these masters to produce a variety of plastic-based microfluidic channel networks and demonstrate their suitability for DNA electrophoresis and microfluidic mixing studies.