Tuning of shear thickening behavior and elastic strength of polyvinylidene fluoride via doping of ZnO-graphene

ZnO rice like nonarchitects are grafted on the graphene carbon core via a rapid microwave synthesis route. The prepared grafted systems are characterized via XRD, SEM, RAMAN, and XPS to examined the structural and morphological parameters. Zinc oxide grafted graphene sheets (ZnO-G) are further doped in β-phase of polyvinylidene fluoride (PVDF) to prepare the polymer nanocomposites (PNCs) via mixed solvent approach (THF/DMF). β-phase confirmation of PVDF PNCs is done by FTIR studies. It is observed that ZnO-G filler enhances the β-phase content in the PNCs. Non-doped PVDF and PNCs are further studied for rheological behavior under the shear rate of 1–100 s⁻¹. Doping of ZnO-G dopant to the PVDF matrix changes its discontinuous shear thickening (DST) behavior to continues shear thickening behavior (CST). Hydrocluster formation and their interaction with the dopant could be the reason for this striking DST to CST behavioral change. Strain amplitude sweep (10⁻³% -10%) oscillatory test reveals that the PNCs shows extended linear viscoelastic region with high elastic modulus and lower viscous modulus. Effective shear thickening behavior and strong elastic strength of these PNCs present their candidature for various fields including mechanical and soft body armor applications.     

Large Area Self-Assembled Ultrathin Polyimine Nanofilms Formed at the Liquid–Liquid Interface Used for Molecular Separation

Separation membranes with higher molecular weight cut-offs are needed to separate ions and small molecules from a mixed feed. The molecular sieving phenomenon can be utilized to separate smaller species with well-defined dimensions from a mixture. Here, the formation of freestanding polyimine nanofilms with thicknesses down to ≈14 nm synthesized via self-assembly of pre-synthesized imine oligomers is reported. Nanofilms are fabricated at the water–xylene interface followed by reversible condensation of polymerization according to the Pieranski theory. Polyimine nanofilm composite membranes are made via transferring the freestanding nanofilm onto ultrafiltration supports. High water permeance of 49.5 L m^-2 h⁻¹ bar⁻¹ is achieved with a complete rejection of brilliant blue-R (BBR; molecular weight = 825 g mol⁻¹) and no more than 10% rejection of monovalent and divalent salts. However, for a mixed feed of BBR dye and monovalent salt, the salt rejection is increased to ≈18%. Membranes are also capable of separating small dyes (e.g., methyl orange; MO; molecular weight = 327 g mol⁻¹) from a mixed feed of BBR and MO. Considering a thickness of ≈14 nm and its separation efficiency, the present membrane has significance in separation processes.     

Regional chemotherapy of liver tumors

In the absence of adequate autogenous vein for tibial artery bypass in limb salvage surgery, the use of prosthetic grafts with a distal anastomotic vein cuff or patch has shown promising results. Here, we describe how the Florester Internal Vessel Occluder (Meadox UK, Bedfordshire, UK) can facilitate the construction of a distal anastomotic vein cuff.     

Modeling the tensile properties in β-processed α/β Ti alloys

The development of a set of computational tools that permit microstructurally based predictions for the tensile properties of commercially important titanium alloys, such as Ti-6Al-4V, is a valuable step toward the accelerated maturation of materials. This paper will discuss the development of neural network models based on a Bayesian framework to predict the yield and ultimate tensile strengths of Ti-6Al-4V at room temperature. The development of such rules-based model requires the population of extensive databases, which in the present case are microstructurally based. The steps involved in database development include producing controlled variations of the microstructure using novel approaches to heat treatments, the use of standardized stereology protocols to characterize and quantify microstructural features rapidly, and mechanical testing of the heat-treated specimens. These databases have been used to train and test neural network models for prediction of tensile properties. In addition, these models have been used to identify the influence of individual microstructural features on the tensile properties, consequently guiding the efforts toward development of more robust mechanistically based models. Based on the neural network model, it is possible to investigate the influence of individual microstructural features on the tensile properties, and in certain cases these dependencies can point toward unrecognized phenomena. For example, the apparently unexpected trend of increase in tensile strength with increasing prior β-grain size has led to the determination of the pronounced role of the basketweave microstructure in strengthening these alloys, especially in case of larger prior β grains. This article is based on a presentation made in the symposium “Computational Aspects of Mechanical Properties of Materials,” which occurred at the 2005 TMS Annual Meeting, February 13–17, 2005, in San Francisco, CA, under the auspices of the MPMD-Computational Materials Science & Engineering (Jt. ASM-MSCTS) Committee.     

Acidolysis Reaction of Sal Fat (Shorea robusta) with Palmitic Acid

Acidolysis reaction of sal fat (Shorea robusta) with palmitic acid has been studied in relation to the operating variables like catalyst system and concentration, reaction temperature and time and molar ratios of reactants with the object of introducing more palmitic acid which is low in sal fat. The results demonstrate that as low as 2.5% and as high as 39% palmitic acid can be introduced in sal fat at the expense of other acids under the influence of various operating conditions. The products obtained differ from original sal fat in respect of chemical composition and slip point. The importance of such study is that there are possibilities of getting plastic fats of diverse properties for edible and industrial uses.     

Study of polyaniline polyacrylamide composites by positron annihilation technique

Polyaniline doped with nonoxidizing Bronsted acids is recognized as a conducting material, as its electrical conductivity changes with percentage of doping. In the present work, different percentages of doped polyaniline were blended with polyacrylamide and their electrical conductivities as well as the positron annihilation lifetimes were measured. Analysis of data yielded three lifetime components. It was observed that the value of the short lifetime component remained constant for doping concentration, whereas that of the intermediate component τ₂ decreased. The relative intensity pertaining to τ₂, however, increased with the increase in doped PANI concentration. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 930–933, 2003     

High molecular weight polypropylene nanospheres: Synthesis and characterization

The high molecular weight (MW) polypropylene with average particle size of 60 nm was synthesized by controlled growth mechanism using Ziegler–Natta catalyst. The atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) studies showed that PP nanoparticles were spherical in shape. Structure and crystallinity were concomitantly studied through Fourier transform infrared spectroscopy and X‐ray diffraction, respectively. It shows nanospherical PP particles with more crystallinity (～ 75%) compared with macrosized PP (～ 59%). In addition, differential scanning calorimetry studies revealed the finite particle size effect on T_g and the scale dependence T_g followed a first order exponential trend. As particle size goes down to nano‐ scale from macrosize, continuous elevation of T_g's were observed from ?25 to ?11°C. This phenomenon was directed to configuration entropy of single spherical nanoparticles of PP. The mechanical properties and surface roughness were also evaluated through AFM. At last, the properties of nanosized PP were compared with micron and macrosized particles. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Conducting blends of poly(o‐toluidine) and ethylene–propylene–diene terpolymer

Poly(o‐toluidine) (POT) is an electroactive polymer with poor mechanical and thermal characteristics. We examined the scope for improving such properties by making blends of POT with ethylene–propylene–diene rubber (EPDM). We prepared POT–EPDM blends containing different weight fractions of POT by intimately mixing known volumes of separate solutions of the two polymers (POT in THF and EPDM in toluene). Films of EPDM and POT–EPDM blends in solution were obtained by spreading, solvent evaporation, and film casting techniques. POT, EPDM, and their blends were characterized in solution by ultraviolet‐visible spectroscopy, and the respective dried samples were analyzed by Fourier transform infrared spectroscopy and thermogravimetry. The polymer samples were further analyzed morphologically by scanning electron microscopy, and their tensile strengths were also evaluated. Spectroscopic and thermal studies of the blends indicated some sort of interaction between the two constituent polymers. The direct current electrical conductivity of the blends in increasing order of POT loading (12.5–100%) was in the range 9.9 × 10^?5 to 11.6 × 10^?2 S cm^?1. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2550–2555, 2003     

Epoxy‐montmorillonite clay nanocomposites: Synthesis and characterization

Nanocomposites of epoxy resin with montmorillonite clay were synthesized by swelling of different proportions of the clay in a diglycidyl ether of bisphenol‐A followed by in situ polymerization with aromatic diamine as a curing agent. The montmorillonite was modified with octadecylamine and made organophilic. The organoclay was found to be intercalated easily by incorporation of the epoxy precursor and the clay galleries were simultaneously expanded. However, Na‐montmorillonite clay could not be intercalated during the mixing or through the curing process. Curing temperature was found to provide a balance between the reaction rate of the epoxy precursor and the diffusion rate of the curing agent into the clay galleries. The cure kinetics were studied by differential scanning calorimetry. The exfoliation behavior of the organoclay system was investigated by X‐ray diffraction. Thermogravimetric analysis was used to determine the thermal stability, which was correlated with the ionic exchange between the organic species and the silicate layers. The morphology of the nanocomposites was evaluated by scanning electron microscopy. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2201–2210, 2004