Relationship between Surface Roughness,Internal Crystal Perfection,and Crystal Growth Rate

Potential mechanisms affecting growth rate dispersion (GRD) are investigated. Previous studies have identified surface roughness and internal lattice perfection as key mechanisms which are both evaluated with respect to GRD. Crystal growth of potassium dihydrogen phosphate was studied in two solvent mixtures, water and water‐ethanol. The surface roughness was analyzed by atomic force microscopy and the internal crystal perfection by X‐ray diffraction using a synchrotron source. The crystals grown at higher supersaturation have more pronounced and more frequent surface irregularities, supporting previous findings on a feedback mechanism between surface roughness and growth rate. No significant relationship was found between internal crystal perfection and growth rate, however, this is likely due to the size of the crystals analyzed herein and not the absence of any such mechanism in small crystals.     

Structure–Property–Process Relationship for Blown Films of Bimodal HDPE and Its LLDPE Blend

Blown films of bimodal‐high‐density polyethylene (HDPE) (BPE) and its blend containing 40 wt% of linear low‐density polyethylene (LLDPE) are prepared in various neck‐heights (NHs). The crystal structures of both films are investigated in detail using small‐angle X‐ray scattering and wide‐angle x‐ray diffraction techniques. The results show that the blending of LLDPE notably modifies the crystal structure of BPE, including crystal density (ρ_c), crystallite size of the 110 plane (〈L₁₁₀〉), thickness of the lamellar crystal (L_c), and grain widths of the lamellae. The relationships between NH, crystal structure, and the resistance of dart‐drop impact (DDI) are investigated for both BPE and BPE/LLDPE films. The results indicate that the reorientation of lamellae might be a primary factor responsible for the DDI property. However, large values of ρ_c, L_c, and 〈L₁₁₀〉 are required for the film to achieve high DDI.     

Phase behavior,in vitro drug release,and antibacterial activity of thermoresponsive poloxamer–polyvinyl alcohol hydrogel-loaded mupirocin nanoparticles

This research was designed to develop thermoresponsive poloxamer (P407)–polyvinyl alcohol (PVA) hydrogels to deliver mupirocin nanoparticles for wound healing. The mupirocin nanoparticles containing drug and gelatin or poly (acrylic acid) were prepared by spray drying. The hydrogel phases were evaluated by small-angle X-ray scattering. An in vitro drug release study was performed and the antibacterial activity of mupirocin nanoparticles-loaded hydrogel (MLH) was evaluated. Fourier transform infrared and proton nuclear magnetic resonance spectrum spectra of the mupirocin nanoparticles indicated a weak interaction between mupirocin and the carriers of carbopol and gelatin. The mupirocin molecules were surrounded by the carrier molecules. The MLH appeared to exhibit single diamond (Fd3m) phase behavior similar to P407 and the hydrogel base. The release of MLH in vitro indicated first-order kinetics (R² = .9839–.8868). The MLH showed lower minimum inhibitory concentrations and minimum bactericidal concentrations against Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa, and Escherichia coli than mupirocin ointment.     

Dispersion and properties of natural rubber‐montmorillonite nanocomposites fabricated by novel in situ organomodified and latex compounding method

Natural rubber (NR)‐montmorillonite (MMT) nanocomposites were prepared by a novel in situ organomodified and latex compounding method, followed by melt compounding technique. Effects of cationic surfactant on MMT dispersion, curing characteristic, mechanical, and dynamical properties were investigated. The number of layers in the layered MMT stack was determined by Small‐Angle X‐Ray Scattering (SAXS). The dispersion of MMT tends to form high ordered structure in NR‐MMT masterbatch when cationic surfactant of more than 4 phr was used. The morphology of Na‐MMT shows partly intercalated and exfoliated structure in the matrix after mixing and hot pressing process with reduced number of layers compared to the pristine MMT. The use of cationic surfactant over 4 phr introduces a plasticizing effect resulting in the reduction of crosslink density, hardness and modulus, but increase in tensile strength due to higher interfacial adhesion between NR and MMT as determined by Maeir‐Goritz model and Field Emission Scanning Electron Microscopy (FESEM). The optimum cationic surfactant loading is observed at 4 phr with the highest stable bonds, which result in the highest crosslink density, tear strength and storage modulus while the lowest Payne effect and tan delta at 60°C. POLYM. ENG. SCI., 59:1830–1839, 2019. © 2019 Society of Plastics Engineers     

Phase‐separation of heterophasic polymer in solution: A model case of impact‐resistant polypropylene copolymer

Impact‐resistance polypropylene copolymer (IPC) has been well known as commercial heterophasic polymer in which ethylene–propylene random copolymer (EPR) domain is dispersed in the homo‐polypropylene matrix. The phase‐separation of those phases is one of the keys to control the polymer properties. However, especially in the solution, there is rarely report that addresses to the phase‐separation of the IPC due to the difficulties in the investigation; i.e., (i) the proximity of the refractive indices of those phases and (ii) the small size of the EPR droplet. Here, the phase‐separation of the commercial IPC in xylene is traced by the in situ small angle X‐ray scattering which the phase‐separation temperature is clearly revealed. The results also show that the evolution of the EPR domain is strongly depended on the polymer composition. Moreover, the migrations of the copolymers are evidenced, and this could be a model for other heterophasic systems. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45069.