Toughening of polybenzoxazine by alloying with urethane prepolymer and flexible epoxy: A comparative study

The toughness of polybenzoxazine can effectively be improved by alloying with isophorone diisocyanate (IPDI)‐based urethane prepolymers (PU) or with flexible epoxy (EPO732). The experimental results, i.e., flexural testing and dynamic mechanical analysis, reveal that the toughness of the alloys of the rigid polybenzoxazine and the PU or the EPO732 systematically increases with the amount of either toughener, due to the addition of more flexible molecular segments in the polymer hybrids. The curing temperature of the benzoxazine resin (bisphenol A‐aniline type [BA‐a]) at about 225°C shifts to a higher value when the fraction of BA‐a in either alloy decreases. Interestingly, the enhancement in the glass transition temperature (T_g) of BA‐a/PU alloys is clearly observed, i.e., T_g of the BA‐a/PU alloys are significantly higher (T_g beyond 200°C) than those of the parent resins, i.e., 165°C for BA‐a and ?70°C for PU. However, this characteristic is not observed in the BA‐a/EPO732 alloy systems. The enhanced T_g of the BA‐a/PU alloy at a 70/30 mass ratio is found to be 220°C, while that of BA‐a/EPO732 at the same mass ratio is observed to be only 95°C, which further decreases as the content of epoxy fraction increases. Furthermore, the degradation temperature based on 5% weight loss in the thermogravimetric analyzer (TGA) thermograms of the BA‐a/PU alloys is found to improve with the presence of the PU, though the opposite trend is observed in the BA‐a/EPO732 systems. The char yield of both alloy systems is steadily enhanced with the increased benzoxazine content because the char yield of the polybenzoxazine is inherently higher than that of the two tougheners. Therefore, the polybenzoxazine alloys with the IPDI‐based urethane prepolymer, e.g., the 70/30 BA‐a/PU, are a promising system for a tough, high thermal stability polymeric network, suitable for both bulk and composite matrix applications. POLYM. ENG. SCI. 45:288–296, 2005. © 2005 Society of Plastics Engineers.     

Synthesis of potassium niobate (KNbO3) nano-powder by a modified solid-state reaction

Crystalline lead-free piezoelectric potassium niobate (KNbO₃) powders have been synthesized through a modified solid-state reaction method. The thermal behavior of the K₂C₂O₄·H₂O and Nb₂O₅ raw material mixture was investigated by thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The X-ray diffraction technique (XRD) was used to investigate the phase formation and purity. The morphology of the powder obtained was characterized using a scanning electron microscope (SEM). The XRD pattern showed that the monophasic perovskite phase of KNbO₃ could be synthesized successfully at a temperature as low as 550 °C for 240 min, with an average crystallite size of 36 ± 8 nm. The SEM images suggested that the average particle size of the powder obtained was 278 ± 75 nm.     

An approach for preparing an absorbable porous film of silk fibroin–rice starch modified with trisodium trimetaphosphate

The absorbable porous material, especially gelatin porous film, is widely used for surgical use to stop bleeding, but its price is quite high. Thus, a new material at lower price with desirable properties is required. This article presents an approach to prepare a porous film of silk fibroin–rice starch (SF–RS) modified with trisodium trimetaphosphate (STMP). The preparation was performed using freeze‐drying method aiming to increase the porosity and improve some other properties of the modified porous film. The solutions of SF and RS (5 : 95 weight ratio) and STMP were mixed and adjusted to pH 12 before being neutralized to pH 7 and freeze‐dried for 48 h. Result from the SEM images showed that the average pore size of the SF–RS film increased from 17 to 126 μm after STMP was added up to 5.0% w/w. Similar to the SF–RS–STMP hydrogel, the linkages within the modified SF–RS porous film also occurred mainly between the O? H groups of RS and the triphosphate group of STMP. Moreover, cross‐linking density of the porous film increased with the increasing content of STMP, evidenced from the increase of relative methylene blue adsorption. The addition of STMP also affected the physical properties of the modified porous film such as degree of swelling, oxygen permeability, but not the water solubility. Whereas, the residual ash of the modified porous films was lower than 2.0% and the degradation of the film ceased after soaking in 0.01M PBS solution for about 2 weeks. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41517.     

Photodetector performance enhancement using an electron accelerator controlled by light

A new method of photodetector performance enhancement using an embedded optical accelerator circuit within the photodetector is proposed. The principle of optical tweezer generation using a light pulse within a PANDA ring is also reviewed. By using a modified add-drop optical filter known as a PANDA microring resonator, which is embedded within the photodetector circuit, the device performance can be improved by using an electron injection technique, in which electrons can be trapped by optical tweezers generated by a PANDA ring resonator. Finally, electrons can move faster within the device via the optical waveguide without trapping center in the silicon bulk to the contact, in which the increase in photodetector current is seen. Simulation results obtained have shown that the device's light currents are increased by the order of four, and the switching time is increased by the order of five. This technique can be used for better photodetector performance and other semiconductor applications in the future.     

Increasing magnesium intakes in relation to magnesium absorption in dry cows

Earlier studies with temporarily isolated rumen of heifers show saturation kinetics of Mg efflux across the rumen wall. Therefore, we hypothesized that high Mg intakes would not further increase the rate of Mg absorption in cows. To test our hypothesis, six ruminally fistulated non-pregnant dry cows were given diets with different Mg concentrations in a 6 x 6 Latin square design. Desired concentrations of Mg were attained by adding MgO to the basal diet and the Mg concentrations in the total rations were 3.8, 6.4, 9.1, 11.8, 14.1 and 173 g Mg/kg dry matter, which provided Mg intakes of 27.1, 44.6, 64.6, 83.5, 100.4 and 124.3 g/d, respectively. Increasing Mg intakes were associated with increased (P<0.001) faecal Mg excretion. However, apparent Mg absorption expressed as g/d was not significantly different for Mg intakes from 100.4 to 124.3 g/d while Mg absorption expressed as a proportion of intake was not significantly different for Mg intakes ranging from 64.6 to 124.3 g/d. Mg concentrations in rumen fluid after feeding increased (P<0.001) with increasing Mg intakes. Apparent absorption of Mg appeared to become saturated at a ruminal Mg concentration of 17.5 mM (Mg intake of 83.5 g/d). Group-mean post-feeding concentrations of Mg and Na in rumen fluid were significantly correlated (Pearson's r=-0.96; P=0.003, n=6). This study showed that under conditions of practical dairy cow feeding, Mg absorption was maximal at Mg intakes > or = 84 g/d.     

Inorganic and Organic Compounds of Freshwater Filamentous Cyanobacteria under Normal and Salt Stress Conditions

The main aim of this work was to investigate the effects of salt stress conditions on the inorganic and organic compounds of extracts from six filamentous cyanobacteria： Arthospira platensis, Oscillatoria sp., Oscillatoria salina, Tolypothrix sp., Oscillatoria sp. SWU （Srinakharinwirot University）121 and Tolypothrix sp. SWU213. All cyanobacteria were cultures in BG （blue-green algae）11 medium： pH 7.5 at 35 ℃ for 30 days of sodium chloride in the culture medium presented 0-1.0 M. The cyanobacteria isolates grew well in BGH medium, nevertheless, growth of the majority of isolates was reduced by about 50% in the same medium containing 0.5 M NaCl. The inorganic compounds such as, Na^＋, K^＋, Ca^2＋, Mg^2＋, NH4^＋ and NO3^- were determined. All ions were reduced when NaCI was increased and Na^＋ showed highest amount in the medium followed with Mg^2＋, NH4^＋, NO3^- and Ca^2＋ in all cyanobaeteria. The organic compounds such as, betaine, proline and total lipid were determined under normal and salt stress conditions. We found that all cyanobacteria increased interesting organic compound under salt stress condition at least two folds to compare with normal condition. This is the first finding indicated that freshwater filamentous cyanobacteria could grow under salt stresses by accumulation of some organic compounds as osmoprotectants such as betaine and amino acids, being the reduction related to the amount of inorganies compounds present in cultures.     

Micro-optical probe model using integrated triple microring resonators for vertical depth identification

Microsystem Technologies - The nonlinear microring resonator system is designed and the triple vertically Panda rings arranged for 3D imaging probe generation. The required whispering gallery modes...     

Role of silk fibroin and rice starch on some physical properties of hydroxyapatite‐based composites

The role of organic blends of silk fibroin (SF) and rice starch (RS) in bone composites based on inorganic hydroxyapatite (HA) is studied. The physical property of HA‐based composites prepared by using the sol–gel method from Ca(OH)₂ and H₃PO₄ in ethanol and water solvent (4 : 1 volume ratio) could be improved by adding SF and RS (1 : 2 weight ratio) to HA (7 : 3 weight ratio). The Fourier transform infrared spectrometer spectrum shows that the SF and RS organic phases are blended homogeneously into the HA crystal structure. Addition of SF increases the pore size and surface area of the composites, as measured by Brunauer–Emmett–Teller method, but their pore volume is slightly decreased. The values of lattice parameters, crystallinity, and crystallite size, as determined from the field‐emission scanning electron microscope, transmission electron microscope, and X‐ray diffractometer results, increase after adding RS. The results are agreeable with the increase of their compressive strength and Young's modulus. Thus, the improved physical property of the prepared HA–SF/RS composites is better suited as bone‐filling material than the standard HA or HA‐based composites with either SF or RS only. Therefore, due to its low cost, biocompatibility, and nontoxicity, this innovative solution could be worth taken under consideration by the restorative dental and orthopedic implants industry. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42722.     

Effect of A-site and B-site ion replaced with small ions on the intermediate phase in PbZrO3 ceramic

The solid solution of (1 − x)PbZrO₃–xNaNbO₃ ceramics, where x = 0.0–0.08, was synthesized by solid state reaction. The basic characterizations were performed using X-ray diffraction (XRD), dielectric spectroscopy, hysteresis measurement and differential scanning calorimetry (DSC) techniques. The results indicated that the crystal structure of the solid solution, (1 − x)PZ–xNN, where x = 0.00–0.08, is of orthorhombic symmetry. It was found that the effect of NN being replaced with small ions at the A-site and B-site can induce an AFE-like phase in PZ. The FE intermediate phase of PZ cannot be induced, although Zr⁴⁺ ions were substituted by small Nb⁵⁺ ions. This is due to the decreasing average rate of radii in the A-site (0.1 Å mol⁻¹) being higher than that in the B-site (0.08 Å mol⁻¹).