Prediction of axial velocity profiles and solids hold-up in a rotary kiln

Axial bed depth profiles were experimentally measured in a rotary kiln containing ilmenite particles under steady state and transient conditions. The variables include feed rate of solids, inclination and rotational speed of the kiln. and dam height. The variation of the axial velocity with kiln axis was estimated. The semi-experimental model proposed by Perron and Bui (1990) was modified to include the effect of the variables of the present study. The mean residence time of solids was estimated from the fractional hold-up and expressed in terms of the process variables. The transients induced by a step change in any of the operating conditions were measured as variation of discharge rate of solids with time.     

Growth mechanism of NaClO3 and NaBrO3 crystals from aqueous solutions

A study of growth rates of NaClO₃ and NaBrO₃ has been carried out using a small growth cell by in situ observation. Normal growth rates of (100) faces of NaClO₃ and (111) faces of NaBrO₃ along 〈110〉 direction are measured under relatively high supersaturation ranging from 3–8%. In the initial stages of growth, (100), (110) and (111) faces develop in NaClO₃ and gradually all the faces are replaced by the (100) faces only. In the case of NaBrO₃, mostly (111) faces develop with occasional occurrence of small (100) faces at the intersection of (111) faces. The growth mechanisms are investigated from growth rate vs supersaturation plots and from the observations of surface features. In the present supersaturation range, the growth mechanism appears to be due to two-dimensional growth mechanism.     

Note: Compact high voltage pulse transformer made using a capacitor bank assembled in the shape of primary

The experimental results of an air-core pulse transformer are presented, which is very compact (<10 Kg in weight) and is primed by a capacitor bank that is fabricated in such a way that the capacitor bank with its switch takes the shape of single-turn rectangular shaped primary of the transformer. A high voltage capacitor assembly (pulse-forming-line capacitor, PFL) of 5.1 nF is connected with the secondary of transformer. The transformer output voltage is 160 kV in its second peak appearing in less than 2 μS from the beginning of the capacitor discharge. The primary capacitor bank can be charged up to a maximum of 18 kV, with the voltage delivery of 360 kV in similar capacitive loads.     

Optimization of fermentation condition for co-production of ethanol and 2,3-butanediol (2,3-BD) from hemicellolosic hydrolysates by Klebsiella oxytoca XF7

Microbial production of ethanol and 2,3-butanediol (2,3-BD) from agro-residues has been attracting interest because of their applications in various industries, including generation of biofuel molecules. In the present investigation, the hemicellulosic fraction of corncob was hydrolyzed by indigenous holocellulase from novel psychrotolerant Aspergillus niger SH3 resulting in high xylose release (34.61?g?L^?1), followed by the bioconversion of xylose to ethanol and 2,3-BD. Taguchi design was adopted to optimize the process which resulted in 5.25- and 3.31-fold increase in 2,3-BD (12.18?±?0.53?g?L^?1) and ethanol (4.08?±?0.03?g?L^?1), as compared with un-optimized condition. For the first time, co-production of ethanol and 2,3-BD from the corncob hemicellulosic hydrolysate was performed using a newly isolated Klebsiella oxytoca XF7 strain, under the optimized fermentation conditions. These results suggest that K. oxytoca XF7 is a promising candidate for co-production of ethanol and 2,3-BD, with high xylose conversion efficiency (96.65%), facilitating the economical production of biofuel molecules.     

Revisiting the size selective performance of EPA's high-volume total suspended particulate matter (Hi-Vol TSP) sampler

Under the National Ambient Air Quality Standard (NAAQS) for airborne lead, measurements are conducted by means of a high-volume total suspended particulate matter (Hi-Vol TSP) sampler. In the decade between 1973 and 1983, there were 12 publications that explored the sampling characteristics and effectiveness of the Hi-Vol TSP, yet there persists uncertainty regarding its performance. This article presents an overview of the existing literature on the performance of the Hi-Vol TSP, and identifies the reported sampler effectiveness with respect to four factors: particle size (reported effectiveness of 7%–100%), wind speed (?36% to 100%), sampler orientation (7%–100%), and operational state (107%–140%). Effectiveness of the Hi-Vol TSP was evaluated with a solid, polydisperse aerosol in a controlled wind tunnel setting. Isokinetic samplers were deployed alongside the Hi-Vol TSP to investigate three wind speeds (2, 8, and 24 km h^?1), three sampler orientations (0°, 45°, 90°), and two operational states (on, off) for aerosols with aerodynamic diameters from 5 to 35 µm. Results indicate that particle diameter was the largest determining factor of effectiveness followed by wind speed. Orientation of the sampler did not have a significant effect at 2 and 8 km h^?1 but did at 24 km h^?1. In a passive state, the Hi-Vol TSP was collected between 1% and 7% of available aerosol depending on particle size and wind speed. Results of this research do not invalidate results of previous studies but rather contribute to our overall understanding of the Hi-Vol TSP's size-selective performance. While results generally agreed with previous studies, the Hi-Vol TSP was found to exhibit less dependence on these four factors than previously reported.

© 2017 American Association for Aerosol Research     

A Novel Highly Sensitive Humidity Sensor Based on ZnO/SBA‐15 Hybrid Nanocomposite

This work deals with the study of hydrothermally synthesized zinc oxide (ZnO) loaded mesoporous SBA‐15 hybrid nanocomposite for relative humidity sensing (RH) at room temperature. The sensor exhibits an excellent ~5 orders impedance change along with excellent linearity, quick response time (17 s), rapid recovery time (18 s), negligible hysteresis (1.2%), good repeatability, and stability (1.8%) in 11%–98% RH range. In addition, complex impedance spectra of the sensor at different RHs were analyzed to understand the humidity sensing mechanism. Our study can open a new way for realizing ZnO/SBA‐15 hybrid nanocomposite for fabrication of high‐performance RH sensors.     

Structural characteriztion of Nd-doped in silica host matrix prepared by net chemical process

Silica host matrix containing neodymium which is potentially important for the formation of nanocrystalline metal oxides was prepared by solgel method, using tetra-ethoxysilane and Nd(NO3)3 as precursor materials. The prepared samples were changed from amorphous to nanocrystallites phase at sintered temperature 550℃ (4 h), 750℃ (8 h) and 950 ℃ (12 h). The thermally treated sample microstructures were investigated using X-ray diffraction (XRD), Fourier transformation infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). While a further increase of the temperature at 750 ℃ and annealing time (8 h) resulted in the formation of cubic and hexagonal Nd2O3 nanocrystallites. At constant sintering temperature 950℃ for 12 h, the samples showed sharper and intense peaks. The sizes of Nd2O3 nanocrystallites were characterized by XRD with average size～46 nm.     

Approximate Shortest Paths Avoiding a Failed Vertex: Near Optimal Data Structures for Undirected Unweighted Graphs

Let G=(V,E) be an undirected unweighted graph. A path between any two vertices u,v∈V is said to be t-approximate shortest path if its length is at most t times the length of the shortest path between u and v. We address the problem of building a compact data structure which can efficiently answer the following query for any u,v,x∈V and t>1: Report t-approximate shortest path between u and v when vertex x fails. We present data structures for the single source as well as all-pairs versions of this problem. The query time guaranteed by our data structures is optimal up to a constant factor. Moreover, the size of each of them nearly matches the size of the corresponding data structure with no failures.     

Anthocyanin-rich fruit vinegar from Grewia and Cantaloupe fruit blends

Grewia is a tropical berry rich in anthocyanins and antioxidants but highly perishable in nature. In this study, desirable composite blend of overripe Grewia (Phalsa) berries and cantaloupe was sought for conversion to acetic acid. Composition of raw macerate, and the alcoholic and acetic ferments was analysed for sugars, alcohol and acetic acid. The primary alcohol yield varied significantly (5.75–99.44%) with blend composition. Vinegar from select blend attained 4.98% acidity with 138.57 mg mL⁻¹ of phenols and high anthocyanins retention (74.77%). Gompertz model was used to fit the growth curves of S. cerevisiae and A. aceti (R²> 0.92) during fermentation. Presence of ethyl acetate, iso-pentyl alcohols explained pleasant sweet fruity aroma of resulting vinegar. Thus, high quality functional red fruit vinegar can be obtained to prevent spoilage and utilise the functional potential of this delicate and nutritious berry.     

Performance analysis of diamond search algorithm over full search algorithm

Microsystem Technologies - Motion estimation is a progression used to estimate motion vectors between two or more images with a high degree of temporal redundancy. It is commonly used in video...