The influence of delayed light curing on the degree of conversion and polymerization contraction stress in dual-cured resin luting agents

The aim of the study was to assess the effect of delayed photo-initiation on the polymerization contraction stress (PCS) and degree of conversion (DC) of a dual-cure resin-luting agent. Thirty-five disk (6 mm × 1 mm) samples (n = 10 each group) of dual cure resin luting agent for PCS assessment were fabricated and polymerized using two illuminated quartz rods. Based on the delay in photo-initiation, 30 disks were divided among six groups [group A-0 min (min) delay, group B-2 min, group C-4 min, group D-6 min, group E-8 min and group F-10 min]. A non-photoinitiated group (group G – chemical cure – n = 5) was included as control. The PCS for all specimens was assessed using a Tensometer. For DC evaluation thirty-five specimens were divided into seven groups with delays in photo-initiation (group H-0 min, group I-2 min, group J-4 min, group K-6 min, group L-8 min and group M-10 min, group N-chemical cure). DC was assessed using attenuated total reflectance spectroscopic technique. Statistical comparison among groups was performed using analysis of variance (α = 0.05). The maximum and minimum PCS and DC values with delayed photo-initiation was observed in group-C (3.34 MPa) & group-F (2.44 MPa); and group-M (0.78 MPa) and group-H (0.55 MPa) respectively. Chemically cured samples showed the least PCS (group-G, 1.94) and DC (group-N, 0.53) values in their respective categories. PCS significantly decreased with delayed photo-initiation. A significant increase in DC was noticed when photo-initiation was delayed in the dual cure resin luting agent.     

Viscoelastic properties of high pressure and heat induced tofu gels

Tofu gels were rheologically examined to determine their storage or elastic (G′) and loss or viscous (G″) moduli as a function of frequency within their linear viscoelastic limits. The tofu gels were made using either glucono-δ-lactone (GDL) or calcium sulphate (CaSO₄·2H₂O), followed by either heat treatment (heated soymilk at ?97 °C prior to coagulation and subsequently held at 70 °C for 60 min, HT) or high pressure treatment (400 MPa at 20 °C for 10 min, HP). The overall moduli values of the GDL gels and CaSO₄·2H₂O gels of both physical treatments were similar, each gave frequency profiles expected for weak viscoelastic materials. However, although both temperature and high pressure treatments could be used to produce tofu gels, the final products were not the same. Pressure formed gels, despite having a higher overall “consistency” (increasing values of their moduli), had a proportionately higher contribution from the loss modulus (increased tan δ). Differences could also be observed using confocal scanning laser microscopy. While such treatment may give rise to differing systems/structures, with new or modified organoleptic properties, the more “open” structures obtained by pressure treatment may well cause processing difficulties if subsequent reworking or moulding is required.     

Synthesis and characterization of poly[(methyl methacrylate)‐co‐(methacrylic acid)] for a UV‐sensitive aqueous base developable lithographic plate

Syntheses of the copolymers of methyl methacrylate and methacrylic acid were carried out by free radical chain polymerization in the presence of benzoyl peroxide (BPO) as an initiator. The effects of the monomer ratio and polymerization time on the averaged molecular weights, polydispersity index, and glass transition temperature were investigated. FTIR and NMR were used for functional group characterization, GPC for average molecular weights and the distribution, elemental analysis for CHO content, and DSC for the glass transition temperature. The copolymers were mixed with tripropylene glycol diacrylate (TPGDA) and trimethylol propane ethoxylated triacrylate (TMPEOTA), 2‐hydroxy‐2‐methyl‐1‐phenyl‐propan‐1‐one (Darocur® 1173) and benzophenone (Darocur® BP) with anthraquinone for visibility of images. The photosensitive coating was spin‐coated onto the anodized aluminum plate on which a thin film was formed. The wet film was then coated with PVA solution as an oxygen barrier layer. The plate assembled with a control wedge and a black color separation film was exposed to UV radiation at different exposure times. The plate was developed in a dilute alkaline developer. The resulting plate was evaluated for its reproduction properties in terms of surface properties (hydrophilic/hydrophobicity) by contact angle measurement of image/nonimage areas, resolution by microline, tone reproduction, and adhesion tests. The article describes the results of the syntheses, characterizations, and uses of the copolymer as a binder of a negative, lithographic printing plate. The present lithographic printing plate is good for a medium viscosity printing ink to produce medium printing quality on uncoated paper. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1829–1837, 2002