Evaluations of the stability of sheathless electrospray ionization mass spectrometry emitters using electrochemical techniques

The processes that cause the failure of sheathless electrospray ionization (ESI) emitters, based on different kinds of gold coatings on fused-silica capillaries, are described and explained. The methods chosen for this study include electrochemical methods, ICPMS analysis of the electrolytes used, SEM studies, and electrospray experiments. Generally, the failure occurs by loss of the conductive coating. It is shown that emitters with sputter-coated gold lose their coatings because of mechanical stress caused by the gas evolution accompanying water oxidation or reduction. Emitters with gold coatings on top of adhesion layers of chromium and nickel alloy withstand this mechanical stress and have excellent durability when operating as cathodes. When operating as anodes, the adhesion layer is electrochemically dissolved through the gold film, and the gold film then flakes off. It is shown that the conductive coating behaves as a cathode even in the positive electrospray mode when the magnitude of a superimposed reductive electrophoretic current exceeds that of the oxidative electrospray current. Fairy-dust coatings developed in our laboratory (see Barnidge, D. R.; etal.Anal. Chem. 1999, 71, 4115-4118,) bygluing gold dust onto the emitter, are unaffected by the mechanical stress due to gas evolution. When oxidized, the fairy-dust coatings show an increased surface roughness and decreased conductivities due to the formation of gold oxide. The resistance of this oxide layer is however negligible in comparison with that of the gas phase in ESI. Furthermore, since no flaking and only negligible electrochemical etching of gold was found, practically unlimited emitter lifetimes may be achieved with fairy-dust coatings.     

Exergy analysis of chemical-looping combustion systems

A power plant based on chemical-looping combustion offers both a possibility of high net power efficiency and separation of the greenhouse gas CO₂. This is due to the way the oxidation of the fuel takes place. Instead of oxidizing the fuel with oxygen from the combustion air, the fuel is oxidized by an oxygen carrier, i.e., an oxygen-containing compound. The oxygen carriers that have been suggested in previous studies are metal oxides like NiO, Fe₂O₃ and Mn₃O₄. The reduced oxygen carrier is in the next step reoxidized by air in a second reactor and then recirculated to the first reactor. In this way, fuel and air are never mixed and the fuel oxidation products CO₂ and water leave the system undiluted by air. All that is needed to get an almost pure CO₂ product is to condense the water vapour and remove the liquid water.Chemical-looping combustion (CLC) is also claimed to reduce the fuel exergy destruction in the overall reaction of combustion of the fuel. This gives a possibility to increase the net power efficiency.This paper gives an introduction to chemical-looping combustion. Results from simulations and a detailed exergy analysis of two different CLC gas turbine (GT) systems are also presented. The first system utilizes methane as a fuel and NiO as oxygen carrier. The second system utilizes a fuel gas mixture consisting mainly of CO and H₂, simulating a fuel gas from for instance coal gasification. Results for this system are given for simulations with both NiO and Fe₂O₃ as oxygen carrier. The two systems are compared to comparable simulated systems with conventional combustion of the same fuel. The exergy analysis shows that the irreversibilities generated upon combustion of the fuel are reduced. The net power efficiency of the CLC–GT systems is similar or higher than for the corresponding GT systems with conventional combustion. The net power efficiency of CLC systems could be even further increased if the exergy remaining in the exhaust could be utilized in an efficient way.     

Hydrogen permeability through rhenium and an Mo-Re alloy with and without chemically vapor-deposited tungsten coatings

The rate of silicon regrowth via transport of silicon through an overlying aluminum or aluminum alloy metallization at 500°C was studied as a function of doping level and grain size of the silicon and metal alloy composition, It is shown that the regrowth rate was significantly reduced or eliminated by (1) heavy phosphorus or nitrogen doping, (2) increasing the silicon grain size by laser annealing or (3) the use of an Al-Cu alloy for metallization. Conversely, the rate was found to be greater for Al-Si in comparison with Al-Cu or aluminum. These results are consistent with a model involving a nucleation step at the silicon-metal film interface and silicon transport through the grain boundaries of both films.     

Constitutive expression of the Wilms'' tumor gene (WT1) in the leukemic cell line U937 blocks parts of the differentiation program

OBJECTIVE: To characterize relationships among blood pressure, pulse rate, vitamin C status and other protective and risk factors for older British people, from a national survey. DESIGN: A cross-sectional analysis of survey data. SETTING: A population study, representative of mainland Britain. SUBJECTS: Among 914 people of both sexes living in the community, 373 were taking blood-pressure-lowering drugs and were therefore excluded from the analyses. INTERVENTIONS: Completion of an interview on health, lifestyle and dietary habits, recording of a 4-day dietary record, anthropometry and taking of a blood sample to determine haematological and biochemical status. MAIN OUTCOME MEASURES: Systolic and diastolic blood pressures, pulse rate, indices of micronutrient status including plasma ascorbate concentration, nutrient intake and haematology. RESULTS: Plasma ascorbate concentration was inversely correlated to systolic and diastolic blood pressures and pulse rate. Other covariates of blood pressure included age, sex, domicile, plasma retinol, fibrinogen and gamma-tocopherol concentrations, erythrocyte count, prothrombin time and urine sodium: creatinine ratio. Covariates of pulse rate included sex, domicile, plasma fibrinogen and platelet count. Blood pressure was also correlated to intake of vitamin C. CONCLUSIONS: Plasma ascorbate concentration and intake of vitamin C are covariates of blood pressure in older people living in Britain. New intervention studies are now needed, to test for possible causalities.     

Creating hot nanoparticle pairs for surface-enhanced Raman spectroscopy through optical manipulation

We use optical tweezers to move single silver nanoparticles into near-field contact with immobilized particles, forming isolated surface-enhanced Raman spectroscopy (SERS) active Ag particle dimers. The surface-averaged SERS intensity increases by a factor approximately 20 upon dimerization. Electrodynamics calculations indicate that the final approach between the particles is due to "optical binding". The described methodology may facilitate controlled single molecule SERS analysis.     

Microelectronics in today's industrial revolution: it's aboutcommunication between people-the rest is technology. I

The author reviews some general issues of telecommunications and IT, and their impact on society. The author then addresses the specific issues of microelectronics and their impacts on industry and society. The state of the telecommunication market is discussed as are the factors affecting market growth, and in particular of mobile communications. Near future telecommunication developments are also discussed     

Water Adsorption on Lubricated a-CH x in Humid Environments

Humidity influences the tribological performance of the head-disk interface in magnetic data storage devices. In this work a quartz crystal microbalance was used to measure the uptake of water on amorphous hydrogenated carbon (a-CH _x ) films at room temperature and pressures of water corresponding to relative humidities of 25%. These experiments have used a-CH _x films of varying thickness with and without lubricant. The lubricants used included Fomblin Z-03, Z-disoc, and Z-tetraol deposited on the surfaces of a-CH _x films of various thickness. The amount of water adsorbed on the unlubricated a-CH _x films is roughly independent of a-CH _x film thickness. The presence of the lubricant reduces the amount of adsorbed water; however, the amount of water adsorbed in the presence of a lubricant does not depend significantly on the type of lubricant. These observations imply that water is adsorbed on the surfaces of the lubricant or the a-CH _x film rather than being absorbed in their bulk.     

Influence of the storage material on the storage of NO x at low temperatures

The NO _x storage performance at low temperature (100–200 °C) has been studied for model NO _x storage catalysts. The catalysts were prepared by sequentially depositing support, metal oxide and platinum on ceramic monoliths. The support material consisted of acidic aluminium silicate, alumina or basic aluminium magnesium oxide, and the added metal oxide was either ceria or barium oxide. The NO _x conversion was evaluated under net-oxidising conditions with transients between lean and rich gas composition and the NO _x storage performance was studied by isothermal adsorption of NO₂ followed by temperature programmed desorption of adsorbed species. The maximum in NO _x storage capacity was observed at 100 °C for all samples studied. The Pt/BaO/Al₂O₃ catalyst stored about twice the amount of NO _x compared with the Pt/Al₂O₃ and Pt/CeO₂/Al₂O₃ samples. The storage capacity increased with increasing basicity of the support material, i.e. Pt/Al₂O₃ · SiO₂ < Pt/Al₂O₃ < Pt/Al₂O₃ · MgO. Water did not significantly affect the NO _x storage performance for Pt/Al₂O₃ or Pt/BaO/Al₂O₃.

     

Numerical solution of multicolumn adsorption processes under periodic countercurrent operation

Numerical solutions of the dimensionless equations describing multicolumn adsorption processes are presented. The columns are operated in series and move periodically countercurrent to a continuous fluid flow. Results are given for intraparticle mass transfer resistance separately and in combination with film resistance assuming a linear adsorption isotherm. Comparisons are made with columns in periodic operation and in continuous countercurrent operation. The utilization of the particles in a multicolumn arrangement, or equivalently in a pulsed bed system, compared to that in a column in continuous countercurrent operation is commonly about 80% for two columns in series and more than 90% for four columns in series, when the total column lengths and the fluid flowrates are the same.     

Calibration, pose and novel views from single images of constrained scenes

We exploit the common constraint of having a right-angle corner of two rectangular planes in the scene in order to calibrate a perspective projection camera and compute its pose relative to the coordinate system defined by the corner. No metric information about the corner is assumed. The camera is constrained to have its image x- and y-axes to be orthogonal with the same scale factor, which is valid for most real-world cameras. We then reproject the image of the corner to an arbitrary viewpoint. We can also compute the metric properties of the scene to scale. We report experimental results with subjectively acceptable quality. The approach shows the power of exploiting constraints that are abundant in typical architectural scenes.