Effects of feed composition,protein denaturation and storage of milk serum protein/lactose powders on lactosylation

During whey powder production, the feed is subjected to several heat treatments which can cause lactosylation of proteins. In this study, lactosylation of whey proteins was evaluated in spray-dried powders before and after storage by varying the native protein fraction as well as the serum protein/lactose ratio in the powders. The lactosylation of native α-lactalbumin and β-lactoglobulin in the powders before storage was not affected to a large extent by the protein denaturation or if the feed had been heat treated in a high or low lactose environment. After storage (relative humidity of 23.5%, 30 °C, 25 days), the kinetic of lactosylation tended to increase with increasing native protein fraction and bulk protein content in the powders. An explanation could be that proteins dissolved in the lactose glassy structure might have a lower reactivity, while proteins present in the protein glassy structure with dissolved lactose may display higher lactosylation reactivity.     

Maternal nutrition and socio-economic status as determinants of birthweight in chronically malnourished African women

The birthweight is the most important determinant of mortality and morbidity in the neonatal period and may have an influence on health in adult life. The high rate of low birthweight in developing countries is therefore a major health problem. Maternal malnutrition is usually assumed to be a causal factor but other environmental factors are also involved. In this study we analysed maternal nutritional and socio-economic factors as determinants of birthweight in term infants from a rural African society characterised by a high rate of chronic malnutrition. Relations of maternal weight, gestational weight gain, parity, socio-economic status and infant sex with birthweight were analysed in 1,477 women and child pairs. The selected women were followed from early pregnancy and had an uncomplicated delivery at term of a living singleton child. The gestational weight gain was 5.6 (SD 6.0) kg and the mean birthweight 2.933 kg (SD 408). Maternal weight, representing the maternal long-term nutritional situation, was the most important independent determinant of birthweight, accounting for 13.0% of the variance in birthweight. The weight gain, representing the short-term nutritional situation, explained only 5.6% of the variance. Birthweight increased by 20 g (CI 18-23) for each kg maternal weight and by 15 g (CI 12-18) for each kg gestational weight gained. The socio-economic difference in birth-weight was 153 g (CI 109-196) 88 of which (CI 48-128) remained unexplained after adjustment for differences in maternal weight, parity and gender. Improved long-term nutritional situation and living conditions seems to be the most important prerequisites to counteract low birthweight in developing countries.     

Role of macrophage overactivation in the development of acute pancreatic injury in rats

PURPOSE: To report quantitative changes in the anterior chamber configuration after small-incision cataract surgery with implantation of a posterior chamber intraocular lens by means of ultrasound biomicroscopy. METHODS: We examined the anterior chamber configuration of 20 eyes of 20 patients before and 3 months after small-incision cataract surgery (phacoemulsification and aspiration plus foldable intraocular lens implantation through a 3.0- to 4.0-mm self-sealing wound) by means of ultrasound biomicroscopy. The following variables were measured: the anterior chamber depth at the center of the cornea, the angle-opening distance 250 microns from the scleral spur (AOD250), the angle-opening distance 500 microns from the scleral spur (AOD500), and the trabecular-iris angle. RESULTS: The anterior chamber depth at the center of the cornea, AOD250, AOD500, and trabecular-iris angle increased significantly after surgery. The preoperative anterior chamber depth at the center of the cornea and trabecular-iris angle were negatively correlated with the differences between the postoperative and preoperative values (P < .01). The preoperative values of all variables examined were negatively correlated with the ratios of the postoperative value to the preoperative value (P < .002). CONCLUSIONS: The present results showed that small-incision cataract surgery significantly deepened the anterior chamber and widened its angle. The more shallow the preoperative anterior chamber was, the greater the postoperative change of the chamber was; and the more narrow the preoperative angle was, the greater the postoperative change of the angle was.     

Titanium and bioactive glass-ceramic coated titanium as materials for keratoprosthesis

The current problem with keratoprosthesis is the ingrowth of corneal or conjunctival epithelium into the anterior chamber. This may lead to infections and extrusion of the prosthesis as well as to the development of retroprosthetic membrane and secondary glaucoma. Glass-ceramic coated and uncoated titanium has been tested as material for the keratoprosthesis to prevent epithelial ingrowth. Twenty-two Supra-Descemet's membrane keratoprostheses were inserted in the eyes of 22 rabbits for 1, 2, 4, 8, or 12 months. The prosthesis had an optic part made of polymethylmetacrylate (PMMA). The support for the optic part and the flange of the prosthesis were made of titanium. Eleven of the prostheses were coated with glass-ceramic. The histological sections of the enucleated eyes were prepared through the central part of the cornea and the prosthesis using a cutting-grinding method. The histological analysis was made on both halves of the implants separately giving two analysis areas in each eye. All 11 titanium prostheses were retained for the time period planned. Two glass-ceramic coated prostheses were lost at 2 and 4 weeks, respectively. This was caused by difficulties at surgery due to a thick coating. These eyes were excluded from the histological analysis. No significant ingrowth of epithelium was seen in 15/18 (83%) and in 16/22 (73%) of the analysed areas of the glass-ceramic coated and titanium prostheses, respectively. Titanium appears to be a suitable material for the keratoprosthesis. The ingrowth of the epithelium may be hindered further by coating the titanium with bioactive glass-ceramic.     

Crystallographic electron microscopy

We present a family of techniques for the transmission electron microscope that generate surface zone-axis patterns. These patterns display the variation of the diffracted-beam intensity as a function of the angle of the incident electrons. The conditions of the experiments are those of reflection high-energy electron diffraction at near grazing incidence. The techniques are: surface convergent-beam diffraction, a surface analogue of the Tanaka method and a modified double-rocking scheme. Experimental results are presented for diffraction from surfaces of MgO and MoS₂. We anticipate that surface zone-axis patterns (surface ZAPs) will become established as an important tool for surface characterization, especially when used in conjunction with high-resolution surface imaging and surface energy loss spectroscopy; surface ZAPs may be expected to play, in surface analysis, a role analogous to that played by convergent-beam diffraction in normal transmission electron microscopy.     

Putting it all together – Formal verification of the VAMP

In the verified architecture microprocessor (VAMP) project we have designed, functionally verified, and synthesized a processor with full DLX instruction set, delayed branch, Tomasulo scheduler, maskable nested precise interrupts, pipelined fully IEEE compatible dual precision floating point unit with variable latency, and separate instruction and data caches. The verification has been carried out in the theorem proving system PVS. The processor has been implemented on a Xilinx FPGA. A shorter version of this article with the title “Instantiating uninterpreted functional units and memory system: functional verification of the VAMP” appeared in [8]. The work reported here was done while all the authors were with Saarland University.     

Extracting electrical material parameters of electrically large dielectric objects from reverberation chamber measurements of absorption cross section

Reverberation chambers can be used to measure the absorption cross section of a dielectric object. The absorption cross section of a dielectric object depends on its size, shape, and electrical material parameters. By comparing with a theoretical model of the absorption cross section, material parameters can be extracted from measurements. A model based on a plane wave approach of incident fields is used here, valid for electrically large material samples in an isotropic environment such as that in a reverberation chamber. Which material parameter can be extracted depends on the properties of the material sample. The presented method combines the accuracy of cavity methods with the flexibility of being able to measure samples of arbitrary size and shape. Because both the reverberation chamber and the material sample are electrically large, the method is particularly useful at millimeter-wave frequencies.     

Influence of body segment dynamics on loads at the lumbar spine during lifting.

Flexion-extension moments acting at the L5/S1 level and hip joints were calculated using three different techniques; a pure static analysis, a static analysis including the inertial force of the load, and a dynamic analysis. Ten subjects participated in the study and were asked to lift a box weighing either 50 N or 150 N, using a freestyle technique. The lifts were performed at normal and fast speed. The intra-subject lifting techniques were consistent when lifting the same loads. The moments predicted by the dynamic analysis and the static analysis were the same when holding weights in static postures. When performing the lifts, differences in the peak moments occurred between static and dynamic analyses. These differences were influenced by external load and by lifting speed. Taking the effect of the inertia of load into account in the static analysis resulted in an increase in the moment magnitude, but the predicted moment was still much less than in the dynamic analysis which yielded the largest moment magnitudes. The difference between dynamic and static analysis was greatest when lifting 50 N at fast speed; an 87% increase in L5/S1 moment and a 95% increase in hip moment was observed when replacing the pure static with a dynamic analysis.