Transmittance and cathodoluminescence of AlN ceramics sintered with Ca3Al2O6 as sintering additive

Aluminum nitride ceramics were prepared by sintering with 0–4.8 mass% of Ca₃Al₂O₆ (C₃A) as a sintering additive. The transmittance in the range of 260–550 nm increased with increasing amount of C₃A. The cathodoluminescence intensity attributed to oxygen-induced defects decreased with increasing amount of C₃A. From the results, the increase of the transmittance in the range of 260–550 nm was considered to be related to the decrease of the oxygen-induced defect density.     

Ulcerative colitis with skip lesions at the mouth of the appendix: a clinical study

OBJECTIVE: We examined the clinical characteristics of ulcerative colitis patients who demonstrated endoscopically discontinuous lesions at the mouth of the appendix. METHODS: Of patients with initial or recurrent active ulcerative colitis who underwent total colonoscopy during the past 3 yr at Osaka City General Hospital, we selected those who had skip lesions in the mouth of the appendix before treatment, and examined their gender, age, disease type, sites of lesions, inflammatory reaction, severity of disease, effects of treatment, and posttreatment course. RESULTS: Discontinuous lesions at the mouth of the appendix were found in 10 patients, who had the following common clinical features: the major lesion was usually present in the lower part of the large bowel including the rectum, many of the patients had suffered an initial attack only, all patients had mild disease, and many of the patients responded quite satisfactorily to treatment with salicylazosulfapyridine. CONCLUSION: Numerous patients with ulcerative colitis with discontinuous lesions at the mouth of the appendix were observed and their clinical characteristics were examined. Determination of the clinical significance of skip lesions in the appendix will contribute to elucidation of the pathogenesis of ulcerative colitis.     

Experimental infection of Naegleria fowleri in mice

PURPOSE: To determine possible cognitive and behavioral effects of antiepileptic drug (AED) therapy by assessing children with newly diagnosed epilepsy before and after initiation of treatment. A comparison group of children with diabetes mellitus (DM) was included to control for the effects of practice, maturation, and chronic illness. METHODS: Baseline neuropsychological assessments were completed for children with epilepsy (n = 37) and children with DM (n = 26) recruited through outpatient clinics at a regional children's hospital. Children were reevaluated 6 months from baseline testing. At follow-up, children with epilepsy had therapeutic AED levels and controlled seizures. Statistical analysis included a between-group repeated measures ANCOVA with pretest scores serving as the covariate. RESULTS: Significant differences between groups were not found for any cognitive or behavioral factors, including attention (p < 0.24), immediate memory (p < 0.24), delayed memory (p < 0.10), complex motor speed (p < 0.19), or behavior problems (p < 0.89). CONCLUSIONS: Changes in performance on cognitive and behavioral measures were not different for children treated with AEDs and controls. Although adverse effects may be associated with prolonged treatment, results would not suggest adverse effects from AED monotherapy during the first 6 months of therapy.     

Net shape formation of sub-micron alumina with reduced flaws by high-speed centrifugal compaction process

A new compacting method for powder materials is presented. High-Speed Centrifugal Compaction Process (HCP) utilizes centrifugal force of about 10,000 g for the compaction. HCP is suitable for net shape compaction of fine sub-micron and nano-powders. HCP possesses a unique compacting mechanism that is different from other colloidal processes including Pressure Casting (PC), and has a number of useful characteristics. HCP has a higher compacting speed than PC, wide applicability for net shape formation, as well as a defect removing function. Because of homogeneous and flawless green microstructure, HCP alumina shows superior sinterability and higher strength and hardness than most of other aluminas. This article is based on a presentation made in the symposium “The 3rd KIM-JIM Joint Symposium on Advanced Powder Materials“, held at Korea University, Seoul, Korea, October 26–27, 2001 under auspices of The Korean Institute of Metals and Materials and The Japan Institute of Metals.     

Effects of bile acid feeding on hepatic deoxycholate 7α-hydroxylase activity in the hamster

In order to investigate the effects of bile acid feeding on hepatic microsomal deoxycholate 7α-hydroxylase activity, three different bile acids were administered (0.2% w/w in chow) to hamsters for two weeks. Deoxycholate 7α-hydroxylase activity was increased markedly by feeding of cholic acid (CA) and slightly by deoxycholic acid (DCA) Chenodeoxycholic acid (CDCA) had little effect on the enzyme activity. Feeding each of the bile acids significantly inhibited the activity of cholesterol 7α-hydroxylase in the order CDCA≥ DCA>CA. There was no correlation between deoxycholate 7α-hydroxylase activity and cholesterol 7α-hydroxylase activity. It is concluded that the activity of deoxycholate 7α-hydroxylase is up-regulated by feeding DCA and CA and that the mechanism seems to be different from that of cholesterol 7α-hydroxylase. The increased activity of hepatic deoxycholate 7α-hydroxylase by CA and DCA should be beneficial in minimizing the toxic effects of DCA in the hamster.     

Microstructures and magnetic properties of heatproof domain-refined grain-oriented silicon steel sheets

Microstructures and magnetic properties of heatproof domain- refined grain- oriented silicon steel sheets were studied. Local strains were introduced using two types of gear roll as well as cog tips, one 35 Μm and the other 85 Μm. After the local strains were introduced onto sheets, the distribution of hardness near the groove was measured. The nuclei of micrograins were investigated at various applied rolling loads. After stress-relief annealing, various shapes of microgranes and grooves were observed. The effect of these various shapes of grooves and micrograins on magnetic properties was clarified. The role of micrograins and grooves on domain refining is discussed.     

Mixed Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>:MoO<Subscript>3</Subscript> (95:5 and 85:15) thin films and their properties for electrochromic device applications

Nb₂O₅:MoO₃ (95:5 and 85:15) thin films were deposited onto glass and fluorine doped tin oxide coated glass substrates at 100 and 300 °C by RF magnetron sputtering technique. The physical and electrochromic properties of the films were studied. XRD result reveals that deposited films were amorphous. The XPS study confirms the compositional purity and the presence of Nb⁵⁺ and Mo⁶⁺ in the deposited film. Surface morphological study shows platelet like features of deposited film. The average transmittance of the film is varied between 91 and 85 %. Photoluminescence study exhibits three characteristic emission peaks and confirms the better optical quality of deposited film. Raman spectra show the LO–TO splitting of Nb–O stretching of the deposited film. Electrochromic behavior of the deposited films characterized by cyclic voltammetry using 0.5 M LiClO₄·PC and 0.5 M H₂SO₄ electrolyte solutions show all the films are having better reversibility and reproducibility in their electrochemical analysis.