Compact electrostatic levitator for diffraction measurements with a two axis diffractometer and a laboratory x-ray source

A compact electrostatic levitator was developed for the structural analysis of high-temperature liquids by x-ray diffraction methods. The size of the levitator was 200 mm in diameter and 200 mm in height and can be set up on a two axis diffractometer with a laboratory x-ray source, which is very convenient in performing structural measurements of high-temperature liquids. In particular, since the laboratory x-ray source allows a great amount of user time, preliminary or challenging experiments can be performed with trial and error, which prepares and complements synchrotron x-ray experiments. The present small apparatus also provides the advantage of portability and facility of setting. To demonstrate the capability of this electrostatic levitator, the static structure factors of alumina and silicon samples in their liquid phases were successfully measured.     

Performance evaluation of fuzzy rule-based classification systems obtained by multi-objective genetic algorithms

In this paper, we examine the classification performance of fuzzy if-then rules selected by a GA-based multi-objective rule selection method. This rule selection method can be applied to high-dimensional pattern classification problems with many continuous attributes by restricting the number of antecedent conditions of each candidate fuzzy if-then rule. As candidate rules, we only use fuzzy if-then rules with a small number of antecedent conditions. Thus it is easy for human users to understand each rule selected by our method. Our rule selection method has two objectives: to minimize the number of selected fuzzy if-then rules and to maximize the number of correctly classified patterns. In our multi-objective fuzzy rule selection problem, there exist several solutions (i.e., several rule sets) called “non-dominated solutions” because two conflicting objectives are considered. In this paper, we examine the performance of our GA-based rule selection method by computer simulations on a real-world pattern classification problem with many continuous attributes. First we examine the classification performance of our method for training patterns by computer simulations. Next we examine the generalization ability for test patterns. We show that a fuzzy rule-based classification system with an appropriate number of rules has high generalization ability.     

生产阻燃剂聚酯和阻燃性母料的方法

正专利提供了生产阻燃性聚酯的方法,聚酯通过共聚含有高浓度的磷,共聚物具有高聚合度,而且二乙二醇组分的共聚合度低,不易变色。生产阻燃聚酯的方法包括边搅拌组成物边加热的步骤,组成物含有下述(A)-(E)的组分:(A)用通式(1)表示的磷化合物;(B)不饱和的二羧酸或其形成的酯化合物;(C)由以乙二醇为主所构成的饱和脂肪烃多元醇和/或酯-形成性的衍生物;(D)(B)成分外的多元羧酸或     

High-Temperature Stability of Alumina in Argon and Argon/Water-Vapor Environments

The high-temperature stability of alumina (Al₂O₃) in argon and argon/water-vapor (Ar/H₂O) environments has been investigated. Samples were exposed at temperatures of 1300°C–1700°C for 10 h. The microstructure, flexural strength, and volume all showed significant changes in the Ar/H₂O environment at 1700°C. Samples also became whiter, because of the oxidation of graphite impurities that had diffused from the hot-processing dies. In the Ar/H₂O environment at 1700°C, grain-boundary etching occurred and was much more severe than in the pure-argon environment, which was very likely caused by the enhanced formation of gaseous Al(OH)₃ and Al(OH)₂ along grain boundaries. In addition, in the Ar/H₂O environment, substantial grain growth occurred in the surface vicinity. This grain growth, together with grain-boundary etching, led to a decrease in flexural strength.     

Toughening of Silicon Nitride Matrix Composites by the Addition of Both Silicon Carbide Whiskers and Silicon Carbide Particles

Si₃N₄ matrix composites reinforced by SiC whiskers, SiC particles, or both were fabricated using the hot-pressing technique. The mechanical properties of the composites containing various amounts of these SiC reinforcing materials and different sizes of SiC particles were investigated. Fracture toughness of the composites was significantly improved by introducing SiC whiskers and particles together, compared with that obtained by adding SiC whiskers or SiC particles alone. On increasing the size of the added SiC particles, the fracture toughness of the composites reinforced by both whiskers and particles was increased. Their fracture toughness also showed a strong dependence on the amount of SiC particles (average size 40 μm) and was a maximum at the particle content of 10 vol%. The maximum fracture toughness of these composites was 10.5 MPa·m^1/2 and the flexural strength was 550 MPa after addition of 20 vol% of SiC whiskers and 10 vol% of SiC particles having an average particle size of 40 μm. These mechanical properties were almost constant from room temperature to temperatures around 1000°C. Fracture surface observations revealed that the reinforcing mechanisms acting in these composites were crack deflection and crack branching by SiC particles and pullout of SiC whiskers.     

日本蓄冷(热)空调系统的发展与最新业绩

介绍了日本减缓温室效应的对策、能源与电力行业现状、蓄冷(热)技术的发展与现状及其应用实例.在区域供热制冷工程中的实际应用数据表明,蓄冷(热)技术无论从减缓温室效应还是经济性角度来说都值得推广.     

Analysis of large deflection of plates by the finite element method

The large deflection problem of a rectangular plate is analysed by using the finite element method and employing the iteration technique. In the present study, the stiffness matrix of a rectangular plate element for bending proposed by Greene is employed, and results of numerical examples duly justifies applicability of the present method.     

Structure Analysis of Molten Ba–Ge Alloys Using Electrostatic Levitation Technique Combined With High-Energy X-Ray Diffraction

High-energy synchrotron X-ray diffraction experiments were performed for clathrate-forming barium–germanium (Ba–Ge) alloys in the liquid state near the eutectic composition. The accurate structure information of highly reactive melts has been obtained by applying electrostatic levitation technique as a containerless method. The structure information obtained from the reverse Monte Carlo simulation suggests that the short-range ordering between the Ge atoms occurs with the addition of Ba atoms in the liquid Ba–Ge alloys. This can be associated with the formation of the cage-like structure composed of the Ge atoms in the liquid alloys near the eutectic composition.     

Comparison of enteral nutrition with combined enteral and parenteral nutrition in post-pancreaticoduodenectomy patients: a pilot study

Background  

Many clinical studies have demonstrated that early postoperative enteral nutrition (EN) improved the postroperative course. Post-pancreaticoduodenectomy (PD), patients tend to suffer from postoperative nausea, abdominal distention, and diarrhoea, causing difficulty in the introduction of EN. In this pilot study, we investigated the appropriate nutritional mode post-pancreatic surgery.