A method for locating fault section by using sequential information at substations

This paper presents a new real-time method for locating fault section at substations. When a fault occurs, considerable information resulting from protective relay operation and circuit-breaker operation is recorded. Using this information an attempt is made to locate the fault section, especially by considering the sequential relationship of the information and by dividing fault areas. Primarily, in this method, the fault area is divided into several sections based on protection area and operation time of protective relays. Next, expecting subsequent operation of backup relays, the “waiting time” for reasoning is given to each divided section. After a lapse of “waiting time,” all the suspected fault sections are extracted and given priority based on the empirical knowledge of experts. A prototype of the expert system was developed for fault section location, which was applied to various complicated fault cases. The effectiveness of the method was proved even in case of multiple faults and no-operation of protective relays the circuit breakers.     

Systematic analysis of neutron yields from thick targets bombarded by heavy ions and protons with moving source model

A simple phenomenological analysis using the moving source model has been performed on the neutron energy spectra produced by bombarding thick targets with high energy heavy ions which have been systematically measured at the Heavy-Ion Medical Accelerator (HIMAC) facility (located in Chiba, Japan) of the National Institute of Radiological Sciences (NIRS). For the bombardment of both heavy ions and protons in the energy region of 100–500 MeV per nucleon, the moving source model incorporating the knock-on process could be generally successful in reproducing the measured neutron spectra within a factor of two margin of accuracy. This phenomenological analytical equation is expressed having several parameters as functions of atomic number Z_p, mass number A_p, energy per nucleon E_p for projectile, and atomic number Z_T, mass number A_T for target. By inputting these basic data for projectile and target into this equation we can easily estimate the secondary neutron energy spectra at an emission angle of 0–90° for bombardment with heavy ions and protons in the aforementioned energy region. This method will be quite useful to estimate the neutron source term in the neutron shielding design of high energy proton and heavy ion accelerators.     

Theoretical and measured characteristics of metal(CoSi2)-insulator(CaF2) resonant tunnelingtransistors and the influence of parasitic elements

We report on the theoretical and measured characteristics of triple-barrier metal (CoSi₂)-insulator(CaF₂) (M-I) resonant tunneling transistors (RTT) grown on an n-Si(111) substrate, and the influence of their parasitic elements on the measured characteristics. First, we analyze theoretical characteristics of an M-I RTT, and then show fabrication process and current-voltage (I-V) characteristics obtained at 77 K, in which several degradations are observed: large resonance voltage, low peak-to-valley (P-V) ratios at negative differential resistance (NDR), and reverse base current. Analysis, taking several parasitic elements (e.g., base resistance, substrate resistance and leakage currents connected to the intrinsic transistor) into account, explains observed characteristics well. Finally, we show the first transistor action with large P-V ratios at 300 K, which is achieved by reducing collector-emitter leakage currents     

Preparation of oriented gold plate/cellulose nanofiber composite films by using TEMPO-oxidized cellulose nanofiber as a reducing agent

Microsystem Technologies - TEMPO-oxidized cellulose nanofiber (TOCN) has been drawing much attention as a useful material for preparation of transparent and stiff films or substrates. In this work,...     

Hydroxyapatite crystal growth on calcium hydroxyapatite ceramics

Calcium hydroxyapatite (Ca-HAP) ceramics containing tricalcium phosphate (TCP) were soaked in three solutions: phosphate buffer, tris buffer, and simulated body fluid (SBF). Petal-like crystals of Ca-HAP were deposited on the Ca-HAP ceramics when (i) Ca-HAP ceramics contained -TCP, (ii) the soaking solution contained phosphate ion and (iii) the pH of soaking solution was higher than 7.3. These conditions facilitate the presence of HPO ₄ ^2– and Ca²⁺ ions, the latter from dissolution of -TCP. A well-defined X-ray diffraction pattern for the deposited Ca-HAP crystals indicates preferred growth of {002} planes. Slower crystal growth of Ca-HAP was found for SBF (pH=7.5) than in the phosphate buffer, due possibly to the lower phosphate ion content in SBF.     

Role of tungsten in promoting selective reduction of NO with CO over Ir/WO3–SiO2 catalysts

Catalytic hydrogenation of naphthalene to decalin was studied over a carbon-supported rhodium catalyst in supercritical carbon dioxide solvent at 333 K, and the results were compared with those in an organic solvent. cis-, trans-Decalin and tetralin were formed from the beginning of the reaction in supercritical carbon dioxide. Higher concentration of hydrogen in carbon dioxide solvent and on the active site, and also the suppression of desorption of partially hydrogenated tetralin molecules from the active site would be responsible for higher selectivity to cis-decalin in supercritical carbon dioxide than that in an organic solvent.     

Optical element converting linear polarization into circular-tangential polarization

A new optical element capable of converting linear polarization into circular-tangential polarization (i.e., the electric vector is along the tangential direction to a circle) is proposed and demonstrated. The conversion characteristics of the fabricated element are evaluated, and the magnitude of aberration produced by the element is shown to be insignificant.     

Fabrication of a concentric-circular focusing grating coupler by a conic-wave-front interference method and light-convergence experiments using the coupler

An interference method utilizing conic-wave-front light for the fabrication of a concentric-circular and chirped grating is proposed. The design method and fabrication of an interference lens that generates conic-wave-front light are also shown. A focusing element is constructed from a concentric-circular grating coupler with a 0.4-mm diameter and a concentric-circular focusing grating coupler with an annular aperture of 2-mm focal length and 2.0-4.0-mm diameter. Light-convergence experiments using the focusing element were able to obtain a focusing spot of 0.5 μm × 0.7 μm at half-intensity widths for a wavelength of 820 nm in combination with liquid-crystal polarization elements.     

Buoyancy engine developed for underwater gliders

A buoyancy engine with a swashplate-type axial piston pump was developed. Its oil extrusion and drawing properties under high hydraulic pressure were evaluated. This buoyancy engine is now installed in an underwater glider that will achieve long-term monitoring of ocean environments up to 2100 m depth in a designated area with lower operational costs. This bidirectionally functioning pump can control the amount of oil in extrusion and draw operations. When drawing oil under high pressure, the hydraulic pump and the electric motor, respectively, act as a hydraulic motor and an electric generator. The generated electric power is absorbed by a damping resistor. The oil-drawing and extrusion properties were measured using a large hyperbaric chamber that is able to produce an almost identical environment to that of actual operations. Results confirmed stable oil extrusion operations up to 21 MPa. Regarding oil-drawing properties, although it was measured only up to 10 MPa in the hyperbaric chamber, it can be inferred that the system can draw the oil and can control the buoyancy precisely up to 21 MPa by replacing the two-way ball valve with an electromagnetic latching solenoid valve.     

Hydrocarbons with a homoconjugated polyene system and their monoepoxy derivatives: Sex attractants of geometrid and noctuid moths distributed in Japan

Although several sex pheromones of the family Geometridae have been characterized, investigations on Japanese species are limited. In order to obtain more information, screening using known sex pheromones and their analogs was carried out. The (Z,Z,Z)-3,6,9-triunsaturated and (Z,Z)-6,9-diunsaturated hydrocarbons with straight C¹⁹-C²¹ chains were synthesized by the Grignard coupling reaction as a key step starting from linolenic and linoleic acids, respectively. Oxidation of the homoconjugated trienes withm-chloroperoxybenzoic acid yielded a 111 mixture of three monoepoxy derivatives that could be separated by silica gel chromatography. The chemical structure of each positional isomer was confirmed using two-dimensional NMR techniques and MS measurements, which enabled characteristic fragment ions from the isomers to be identified. Field tests using lures incorporating only one of the above six hydrocarbons or nine epoxides were carried out in a forest in Tokyo. Consequently, attraction of male moths of 14 geometrid species in addition to four species in another family, the Noctuidae, was observed. It was concluded that hydrocarbons with a homoconjugated polyene system and the monoepoxy derivatives are important components of sex pheromones produced by Japanese lepidopterous insects, particularly the geometrid moths.