Collection efficiency of liquid‐based samplers for fungi in indoor air

This study assessed the collection efficiency (CE) of two popularly used sampling devices (BioSampler and Coriolis sampler) for fungal aerosols. Phosphate‐buffered saline (PBS) supplemented with or without surfactant (Tween‐20, Tween‐80, or Triton X‐100) and antifoam agent was prepared and used as collection liquids. The agar impactor (BioStage) was simultaneously operated with liquid‐based samplers to collect fungi from seven sites located at a university building, public library, and animal farming. Fungal concentrations determined by liquid samplers were divided by those by BioStage, and the ratio values represented CE. Results indicate that the CE of BioSampler was superior to that of Coriolis (P = 0.0001) and the PBS containing surfactant collected fungi better than that without surfactant (P < 0.0001), whereas antifoam agent showed no influence (P = 0.8). Moreover, fungal concentrations determined by BioSampler with surfactant‐added PBS were statistically indifferent from those by BioStage (P > 0.05) with a Spearman correlation coefficient of 0.81‐0.83 (P < 0.01). In addition to sampler and collection liquid, sampling location was also identified as a significant CE factor (P = 0.006), implying potential influences by fungal genera in the studied fields. Overall, BioSampler with surfactant‐supplemented PBS (eg, Triton X‐100) is recommended considering the great CE and compatibility with a variety of analytical assays.     

Sliding wear of Al2O3P/6061 Al composite

The mild sliding wear behaviour of a 15 vol % Al₂O_3P/6061 Al composite has been investigated by using a pin-on-disc reciprocating sliding machine. The composite has been shown to exhibit an excellent wear resistance as compared to the unreinforced matrix alloy. The wear rate of the composite under dry wear conditions with a 12N load is approximately one tenth of that in the 6061 aluminium alloy. The wear rate of the composite under lubrication with 15W/40 gear oil under a 100N load is only one thousandth ofthat in the 6061 aluminium alloy.The dry wear resistance of an over-aged sample is shown here to be better than a peak aged or under-aged sample when the composite was aged at 160°C. The coefficient of friction of the composite was approximately 0.5–0.6 under dry conditions and 0.07 in lubricated wear experiments.In the initial stage, the worn surface of the composite under dry conditions is primarily composed of ploughed grooves and ductile tear. The composite makes a conducting contact with the steel pin. The worn surface is composed of compacted powder and the contact potential gradually increases when the period of the wear experiment goes beyond 2 h.     

Efficiency improvement of near-ultraviolet InGaN LEDs using patterned sapphire substrates

The use of conventional and patterned sapphire substrates (PSSs) to fabricate InGaN-based near-ultraviolet (410 nm) light-emitting diodes (LEDs) was demonstrated. The PSS was prepared using a periodic hole pattern (diameter: 3 /spl mu/m; spacing: 3 /spl mu/m) on the (0001) sapphire with different etching depths. From transmission-electron-microscopy and etch-pit-density studies, the PSS with an optimum pattern depth (D/sub h/=1.5 /spl mu/m) was confirmed to be an efficient way to reduce the thread dislocations in the GaN microstructure. It was found that the output power increased from 8.6 to 10.4 mW, corresponding to about 29% increases in the external quantum efficiency. However, the internal quantum efficiency (@ 20 mA) was about 36% and 38% for the conventional and PSS LEDs, respectively. The achieved improvement of the output power is not only due to the improvement of the internal quantum efficiency upon decreasing the dislocation density, but also due to the enhancement of the extraction efficiency using the PSS. Finally, better long-time reliability of the PSS LED performance was observed.     

Enhanced output power of near-ultraviolet InGaN-GaN LEDs grown on patterned sapphire substrates

Near-ultraviolet nitride-based light-emitting diodes (LEDs) with peak emission wavelengths around 410 nm were fabricated onto c-face patterned sapphire substrates (PSS). It was found that the electroluminescence intensity of the PSS LED shown 63% larger than that of the conventional LED. For a typical lamp-form PSS LED operating at a forward current of 20 mA, the output power and external quantum efficiency were estimated to be 10.4 mW and 14.1%, respectively. The improvement in the light intensity could be attributed to the decrease of threading dislocations and the increase of light extraction efficiency in the horizontal direction using a PSS.     

Solving the bi-objective personnel assignment problem using particle swarm optimization

A particle swarm optimization (PSO) algorithm combined with the random-key (RK) encoding scheme (named as PSORK) for solving a bi-objective personnel assignment problem (BOPAP) is presented. The main contribution of this work is to improve the f₁_f₂ heuristic algorithm which was proposed by Huang et al. [3]. The objective of the f₁_f₂ heuristic algorithm is to get a satisfaction level (SL) value which is satisfied to the bi-objective values f₁, and f₂ for the personnel assignment problem. In this paper, PSORK algorithm searches the solution of BOPAP space thoroughly. The experimental results show that the solution quality of BOPAP based on the proposed method is far better than that of the f₁_f₂ heuristic algorithm.     

Bending-beam measurement of solvent diffusions in polyimides: Theoretical and experimental

A general formula correlating the bending curvature variation ratio of a layered structure caused by solvent-induced swelling in its polymer overcoat with diffusion time under case II diffusion has been presented. In the event of case II diffusion, the diffusion front velocity, v, can be calculated by using this formula and measured by a bending-beam apparatus. At room temperature, the diffusion of n-methyl-pyrrolidone (NMP) solvent in the film of pyromellitic phenylene diamine (PMDA-PDA) is case II. While in PMDA-B (-benzidine) and benzophenone tetracarboxylic dianhydride (BPDA-PDA), no diffusion progress can be observed. But, the diffusion in 6F-dianhydride- (6FDA-PDA) is case I with D = 0.85 × 10^?9 cm²/s. It becomes anomalous when mixing with 25% PMDA-B, but becomes case II diffusion with more PMDA-B. The preabsorbed moisture in the films does not affect the v value. In PMDA-PDA, v = 7.3 × 10^?8 cm/s. In the 25/75 and 50/50 6FDA-PDA/PMDA-B blends, v = 6.3 and 11.3 × 10^?8 cm/s.     

Evaluation of two cooling systems under a firefighter coverall

Firemen often suffer from heat strain. This study investigated two chest cooling systems for use under a firefighting suit. In nine male subjects, a vest with water soaked cooling pads and a vest with water perfused tubes were compared to a control condition. Subjects performed 30 min walking and 10 min recovery in hot conditions, while physiological and perceptual parameters were measured. No differences were observed in heart rate and rectal temperature, but scapular skin temperature and fluid loss were lower using the perfused vest. Thermal sensation was cooler for the perfused vest than for the other conditions, while the cool pad vest felt initially cooler than control. However, comfort and RPE scores were similar. We conclude that the cooling effect of both tested systems, mainly providing a (temporally) cooler thermal sensation, was limited and did not meet the expectations.