Process Intensification of Living Cationic Polymerization of Isobutylene by a Flow Reaction System

Increasing the reaction temperature of the living cationic polymerization of isobutylene is crucial for industrial production due to the cost of refrigeration. The reaction temperature increase was achieved with an accelerated reaction rate using a flow reaction system. The polymerization conditions, including the flow reactor design, were based on the results of kinetic studies. Utilizing a milli‐scale flow reactor, polyisobutylene, which has a narrow molecular weight distribution, was obtained within a considerably short residence time at a high temperature. Furthermore, it was confirmed that the value of M_w/M_n correlates with the product of the Reynolds number and the angle of collision.     

Combustion synthesis of AlN doped with carbon and oxygen

Carbon-and-oxygen-doped AlN specimens were prepared by combustion synthesis using Al, graphite, and AlN. Graphite addition changed the product color from white to blue. By XRD, the lattice constant increased slightly with increasing carbon content. Blue AlN powder was synthesized with a molar ratio of the diluent AlN of 0.2-0.5 with a fixed graphite content of 0.05. At an AlN molar ratio exceeding 0.6, carbon was not successfully incorporated due to the lower reaction temperature. Calcination at 800°C in air removed residual graphite without changing the crystal structure or product color. Oxygen, nitrogen, and carbon analyses revealed that blue AlN powders contained 0.45-0.54 mass% carbon and 1.4-1.6 mass% oxygen, while the undoped AlN contained 0.021 mass% carbon and 0.94 mass% oxygen. The origin of the white-to-blue color change was investigated via reflection measurements. Blue AlN exhibits an absorption peak at 634 nm (1.96 eV). From first-principles electronic structure calculations, the C-doped AlN and carbon-and-oxygen-doped AlN with a 1:1 ratio could be classified as p-type, whereas the O-doped AlN and 1:3 carbon-and-oxygen-doped AlN were n-type. One reason for the absorption peak at 634 nm may be a transition from the conduction band to an upper unoccupied state. These results suggest the possible control of optical and electronic properties of AlN via carbon-and-oxygen doping.     

A Bayesian propensity score adjustment for latent variable modeling and MCMC algorithm

The estimation of the differences among groups in observational studies is frequently inaccurate owing to a bias caused by differences in the distributions of covariates. In order to estimate the average treatment effects when the treatment variable is binary, Rosenbaum and Rubin [1983. The central role of the propensity score in observational studies for causal effects. Biometrika 70, 41-55] proposed an adjustment method for pre-treatment variables using propensity scores. Imbens [2000. The role of the propensity score in estimating dose-response functions. Biometrika 87, 706-710] extended the propensity score methodology for estimation of average treatment effects with multivalued treatments.However, these studies focused only on estimating the marginal mean structure. In many substantive sciences such as the biological and social sciences, a general estimation method is required to deal with more complex analyses other than regression, such as testing group differences on latent variables. For latent variable models, the EM algorithm or the traditional Monte Carlo methods are necessary. However, in propensity score adjustment, these methods cannot be used because the full distribution is not specified.In this paper, we propose a quasi-Bayesian estimation method for general parametric models that integrate out the distributions of covariates using propensity scores. Although the proposed Bayes estimates are shown to be consistent, they can be calculated by existing Markov chain Monte Carlo methods such as Gibbs sampler. The proposed method is useful to estimate parameters in latent variable models, while the previous methods were unable to provide valid estimates for complex models such as latent variable models.We also illustrated the procedure using the data obtained from the US National Longitudinal Survey of Children and Youth (NLSY1979-2002) for estimating the effect of maternal smoking during pregnancy on the development of the child's cognitive functioning.     

Identification of stress-induced leakage current components and thecorresponding trap models in SiO2 films [MOStransistors]

Time-decay stress-induced leakage current (SILC) has been systematically investigated for the cases of both Fowler-Nordheim (FN) stress and substrate hot-hole stress. From the three viewpoints of the reproducibility of the current component for the gate voltage scan, the change of oxide charge during the gate voltage scan, and the resistance of the current component to thermal annealing, it has been found that time-decay stress-induced leakage current is composed of five current components, regardless of stress type. Trap models corresponding to each current component have been proposed. In addition, it has also been proven that holes generate the electron traps related to one of those current components     

Effect of surfactants on phenol removal by the method of polymerization and precipitation catalysed by Coprinus cinereus peroxidase

The removal of phenol by peroxidase‐catalysed polymerization was examined using Coprinus cinereus peroxidase in the presence of surfactants. The non‐ionic surfactants with poly(oxyethene) residues, Triton X‐100, Triton X‐405 and Tween 20, enhanced the phenol removal efficiency at a level similar to high relative molecular mass poly(ethylene glycol) (relative molecular mass 3000). Although the improvement in the removal efficiency was less than that of Triton X‐100, Span 20, sodium lauryl sulfate (SDS) and lauryl trimethylammonium bromide (DTAB) also enhanced the removal efficiency. The requirement of the enzyme for almost 100% removal of 100 mg dm^?3 phenol decreased to one‐fourth by the addition of 30 mg dm^?3 Triton X‐100. Triton X‐100, Triton X‐405, Tween 20 and DTAB could reactivate the enzyme precipitated with the phenol polymer, leading to the restarting of the phenol removal reaction. Copyright © 2003 Society of Chemical Industry     

Activity measurement of the constituents in molten Fe–B and Fe–B–C alloys

The distribution ratios of Fe and B between molten Fe–B alloy and molten Ag were measured at temperatures between 1573 and 1923 K. Also, distribution ratios of Fe and B between molten Fe–B–C_satd. alloys and molten Ag were measured at 1873 K. It was found that the excess Gibbs free energy of mixing in molten Fe–B and Fe–B–C alloys can be expressed by utilizing the Redlich–Kister polynomial. The activity curves of the elements in molten Fe–B alloy and Fe–B–C alloy were estimated.     

Preparation and properties of transparent cellulose hydrogels

Highly transparent cellulose hydrogels with physical crosslinkage were prepared from nonaqueous organic cellulose solutions and viscose by coagulating and regenerating cellulose in an aqueous solution containing a water‐miscible organic solvent. Nonaqueous organic cellulose solutions used were LiCl/dimethylacetamide, paraformaldehyde/dimethyl sulfoxide, and triethylammonium chloride/dimethyl sulfoxide. Preparation conditions and physical properties of the transparent cellulose hydrogels were studied. The transparency of the cellulose hydrogels depended on the composition of the aqueous solution containing the organic solvent. Furthermore, transparent cellulose hydrogels from viscose showed high tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3020–3025, 2003     

High-performance carbon counter electrode for dye-sensitized solar cells

Here, we reported that a new carbon electrode prepared with an activated carbon was superior to a Pt sputtered electrode as the counter electrode of dye-sensitized solar cells. The photovoltaic performance was largely influenced by the roughness factor of carbon electrode. The open-circuit voltage increased by about 60 mV using the carbon counter electrode compared to the Pt counter electrode because of positive shift of the formal potential for I₃⁻/I⁻ couple.     

Oligosaccharide structures formed during the hydrolysis of lactose by Aspergillus oryzae β-galactosidase

Di-, tri-, tetra-, penta- and hexasaccharides were formed during the hydrolysis of lactose by transgalactosylation reaction of Aspergillus oryzae β-galactosidase. In this study the isolation and characterization of the major constituents of tri-, tetra- and pentasaccharides are described. The structure elucidation of 3 tri-, 2 tetra- and 1 pentasaccharides was carried out by methylation analysis, mass spectrometry and ¹³C-nmr spectrometry. The trisaccharides are $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 3)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}\text{(3′-}\text{galactosyl-lactose}\text{)}$, $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}\text{(6′-}\text{galactosyl-lactose}\text{)}$ and $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-O-[β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)]-}\text{d}\text{-}\text{glucose}\text{(4,6-}\text{digalactosyl-glucose}\text{)}$. Tetrasaccharides are $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}$ and $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 3)}$ [or $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 3)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)]-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}$. Pentasaccharide is $\text{O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 6)-O-β-}\text{d}\text{-}\text{galactopyranosyl}\text{-(1 → 4)-}\text{d}\text{-}\text{glucose}$.     

Optical Energy Gap and Below Gap Optical Absorption of Fullerene Films Measured by the Constant Photocurrent Method and Photothermal Deflection Spectroscopy

The CPM spectra of fullerene films was measured to obtain the below gap absorption. The optical energy gap E_o was obtained by using the Tauc's plots. E_o did not change greatly with intercalated impurities. The absorption due to intercalated impurities was found below 1.6eV.