High-resolution long-array thermal ink jet printhead fabricated by anisotropic wet etching and deep Si RIE

This paper describes the fabrication and characterization of a thermal ink jet (TIJ) printhead suitable for high speed and high-quality printing. The printhead has been fabricated by dicing the bonded wafer, which consists of a bubble generating heater plate and a Si channel plate. The Si channel plate consists of an ink chamber and an ink inlet formed by KOH etching, and a nozzle formed by inductively couple plasma reactive ion etching (ICP RIE). The nozzle formed by RIE has squeezed structures, which contribute to high-energy efficiency of drop ejector and, therefore, successful ejection of small ink drop. The nozzle also has a dome-like structure called channel pit, which contributes to high jetting frequency and high-energy efficiency. These two wafers are directly bonded using electrostatic bonding of full-cured polyimide to Si. The adhesive-less bonding provided an ideal shaped small nozzle orifice. Use of the same material (Si substrate) in heater plate and channel plate enables the fabrication of high precision long printhead because no displacement and delamination occur, which are caused by the difference in thermal expansion coefficient between the plates. With these technologies, we have fabricated a 1" long printhead with 832 nozzles having 800 dots per inch (dpi) resolution and a 4 pl. ink drop volume.     

Network information criterion-determining the number of hiddenunits for an artificial neural network model

The problem of model selection, or determination of the number of hidden units, can be approached statistically, by generalizing Akaike's information criterion (AIC) to be applicable to unfaithful (i.e., unrealizable) models with general loss criteria including regularization terms. The relation between the training error and the generalization error is studied in terms of the number of the training examples and the complexity of a network which reduces to the number of parameters in the ordinary statistical theory of AIC. This relation leads to a new network information criterion which is useful for selecting the optimal network model based on a given training set.     

Aging time dependence of catastrophic optical damage (COD) failureof a 0.98-μm GaInAs-GaInP strained quantum-well laser

In this paper, we studied the aging time dependence of the catastrophic optical damage (COD) failure of an Al-free uncoated 0.98-μm GaInAs-GaInP strained quantum-well laser with an injection current as a parameter. Based on the stress-strength model, we first investigated experimentally the dependence of the critical power level (CPL) at which COD would take place upon the aging time. Then applying a statistical treatment to this result, we found for the first time that CPL data at each aging time could be considered to distribute according to the Weibull statistics, and the decrease rate of the CPL with the aging time depended very strongly on the injection current. Finally, using the relationship between the decrease rate of the CPL with the aging time and the current, we predicted roughly the time of a COD failure occurrence for both large and small current cases. As a result, we clarified that for our Al-free uncoated 0.98-μm laser, a COD failure became a fatal problem in the case of a large-current (high-power) operation     

DNA damage induced by m-phenylenediamine and its derivative in the presence of copper ion

We have previously reported that long-term priming of human polymorphonuclear neutrophilic granulocytes (PMN) with interferon-gamma (IFN-gamma) increased the fMLP-stimulated calcium influx. We now show that also after short-term incubation with IFN-gamma, PMN calcium metabolism is modulated. Single adherent cells in three different calcium-containing buffers (high, normal, and low [Ca2+]) were stimulated with the bacterial peptide fMLP or the Ca-ATPase inhibitor thapsigargin (Tg) after about 5 min preincubation with IFN-gamma. The results of this protocol indicated that IFN-gamma increases both calcium influx and calcium sequestration. Store dependent Ca2+ influx, directly measured on readdition of calcium to Tg-treated cells incubated in EGTA buffer, was significantly enhanced in IFN-gamma-treated cells. This effect of IFN-gamma was enhanced by the tyrosine kinase inhibitor herbimycin A. Strikingly, in low extracellular calcium concentrations, IFN-gamma induced calcium transients in 20%-60% of the cells. The proportion of PMN responding with Ca2+ transients increased with decreasing extracellular calcium concentration. Average lagtime from addition of IFN-gamma to a response that could be measured was 7.3 sec, and average increase in [Ca2+] above the basal level was 790 nM. These IFN-gamma-induced transients could not be depressed by herbimycin A. Thus, IFN-gamma can increase capacitative calcium influx, induce calcium transients, and possibly affect calcium sequestration in human PMN.     

25 Gbit/s selector module using 0.2 mu m GaAs MESFET technology

A high-speed selector module has been developed. It is constructed from a selector IC mounted in a ceramic package, a power supply unit, phase shifters, and coaxial cables. The IC was designed using LSCFL and fabricated with 0.2 mu m gate length GaAs MESFETs. The selector module operated above 25 Gbit/s. It is expected to be applied to high-speed IC measurements.<>     

Separation of di- and tripeptides with solvent extraction and an emulsion liquid membrane

The extraction equilibria of various di- and tripeptides with di-2-ethylhexylphosphoric acid (D2EHPA) were studied at low pH values. The complex extracted to organic phase consisted of one molecule of peptide and two molecules of D2EHPA dimer. The extraction constants of the peptides correlated well with the distribution coefficients of peptides between 1-octanol and water, which is a measure of hydrophobicity. The permeation rates of peptides through an emulsion liquid membrane were examined by using D2EHPA as a carrier, Span 80 as an emulsifier and kerosene as a diluent. The rates varied considerably with peptide type, depending upon the hydrophobicity.     

A Composite Index of Compliance for Chronic In‐Center Hemodialysis Patients

We developed a composite compliance index as the sum of the compliance scores for interdialytic weight gain (IDWG), pre‐dialysis serum potassium and phosphorus concentrations (each scored from zero to 3, with 3 indicating the poorest compliance), and skipping hemodialysis sessions (scored from zero to 9, with 9 indicating the poorest compliance). We used this composite score to prospectively evaluate compliance in 25 prevalent hemodialysis patients over a period of 1 year. We then followed these patients for another 3.5 years. The patients studied were divided into two groups: group A (poor compliance) consisted of 9 subjects with composite score ≥ 9 (13.2 ± 3.2); group B (better compliance) consisted of 16 subjects with composite score < 9 (4.7 ± 1.8). Age, duration of hemodialysis, and frequency of diabetes mellitus did not differ between the groups. Group A contained higher fractions of subjects with history of alcoholism (66.7% vs 12.5%, p = 0.010), other substance addiction (44.4% vs 0%, p = 0.010), and severe psychosocial problems (88.9% vs 18.8%, p = 0.002). Mean survival from the beginning of observation, estimated by actuarial life‐table survival analysis, was 1.19 years in group A and 2.60 years in group B (p = 0.0265). A composite compliance index incorporating domains indicating adherence to diet, medications, and dialysis schedule identified other behavioral problems in poorly compliant patients. Hemodialysis patients characterized by this composite index as poorly compliant had shortened survival.     

Non-linear current–voltage characteristics related to native defects in SrTiO3 and ZnO bicrystals

SrTiO₃ and ZnO bicrystals with various types of boundaries were fabricated in order to examine their current–voltage characteristics across single grain boundaries. Their grain boundary structures were also investigated by high-resolution transmission electron microscopy. In Nb-doped SrTiO₃, electron transport behaviors depend on the type of boundaries. Random type boundaries exhibit highly non-linear current–voltage characteristics, while low angle boundaries show a slight non-linearity. On the contrary, undoped ZnO does not exhibit non-linear current–voltage characteristics in any type of boundaries including random ones. It is suggested that the differences observed in current–voltage properties between the two systems are mainly due to the difference in the accumulation behavior of acceptor-like native defects at grain boundaries. A clear non-linearity is obtained by means of Co-doping even for the highly coherent Σ1 boundary in a ZnO bicrystal. This is considered to result from the production of acceptor-like native defects by Co-doping.     

Survey of switching techniques in high-speed networks and their performance

One of the most promising approaches for high speed networks for integrated service applications is fast packet switching, or ATM (asynchronous transfer mode). ATM can be characterized by very high speed transmission links and simple, hard-wired protocols within a network. To match the transmission speed of the network links, and to minimize the overhead due to the processing of network protocols, the switching of cells is done in hardware switching fabrics in ATM networks. A number of designs have been proposed for implementing ATM switches. Although many differences exist among the proposals, the vast majority of them are based on self-routeing multistage interconnection networks. This is because of the desirable features of multi-stage interconnection networks such as self-routeing capability and suitability for VLSI implementation. Existing ATM switch architectures can be classified into two major classes: blocking switches, where blockings of cells may occur within a switch when more than one cell contends for the same internal link, and non-blocking switches, where no internal blocking occurs. A large number of techniques have also been proposed to improve the performance of blocking and non-blocking switches. In this paper, we present an extensive survey of the existing proposals for ATM switch architectures, focusing on their performance issues.     

H∞ control versus disturbance-observer-basedcontrol

In the motion control field, a disturbance observer-based disturbance canceling control is often used as a robust control methodology. However, this method is nothing more than an alternative design of an integral controller, and the robust stability issue cannot be directly accounted for. In this paper, an extended H_∞ control scheme is proposed as a new robust motion control method which achieves the disturbance cancellation ability and guarantees robust stability automatically