Polarization characteristics of poly(vinyl alcohol) films containing metal iodide

The polarization properties of iodine complex layer deposited by oxidation of poly(vinyl alcohol) (PVA) containing metal iodide were investigated. Heat-resistant polarizing films with high polarization efficiency were produced by oxidizing and stretching the PVA containing metal iodide. The results indicate that i) the polarization efficiency of a polarizing film prepared by oxidation of a PVA film containing 1 mmol or more of potassium iodide (KI)/g PVA at 0°C for 120 s in a 10 wt.-% aqueous solution of H₂O₂ and a degree of stretching of 400% is high, ii) the heat resistance of the polarizing film in this experiment is higher than that of a filter prepared from a commercial PVA film.     

Thermal Transformation of Ring-Opened [2 2] C60 Dimer into a Wide-Bridged C120 Isomer. A Computational Evaluation of Fulvalene-Naphthalene Rearrangements

As a continuation of the studies on thermal transformation of the [2+2] C₆₀ dimer (1), the consequence of the pyracylene-rearrangement-like valence isomerization of the fulvalene partial structure at the bridge of the ring-opened product from 1, namely 2, was searched by dynamic reaction coordinate /AM1 semiempirical MO calculations. It is predicted that the fulvalene bridge of 2 rearranges into naphthalene partial structure by the concerted 'in-plane' mechanism to give a wide-bridged C₁₂₀ intermediate having twenty five-membered rings and two ten-membered rings (3). The computed energy of activation (145 kcal/mol) is 40 kcal/mol lower than those computed for pyracylene rearrangements. In contrast, the recently reported analogous rearrangement of indigo (13) to dibenzonaphthyridindione (14) is computed to occur by the stepwise 'sp³' mechanism.     

Polymerization via zwitterion 25. Alternating copolymerizations of cyclic acyl phosphorite and phosphite with vinyl monomers having an electron withdrawing group

Summary Spontaneous copolymerizations of cyclic acyl phosphonite (SPO) and phosphite (SPI) with an electron-deficient vinyl monomer such as methyl acrylate (MA), methyl vinyl ketone (MVK), and acrolein (AL), gave the corresponding alternating copolymers. These copolymerizations took place without added initiator and proceeded through zwitterion intermediates. Copolymer structures 1a, 1b, 2 and 3 have been established, all of which were derived in a regiospecific manner of ambident anions. The scheme of the copolymerizations is presented.     

Catalysis of gasification of coal-derived cokes and chars

Calcium is the most important in-situ catalyst for gasification of US coal chars in O₂, CO₂ and H₂O. It is a poor catalyst for gasification of chars by H₂. Potassium and sodium added to low-rank coals by ion exchange and high-rank coals by impregnation are excellent catalysts for char gasification in O₂, CO₂ and H₂O. Carbon monoxide inhibits catalysis of the CH₂O reaction by calcium, potassium and sodium; H₂ inhibits catalysis by calcium. Thus injection of synthesis gas into the gasifier will inhibit the CH₂O reaction. Iron is not an important catalyst for the gasification of chars in O₂, CO₂ and H₂O, because it is invariably in the oxidized state. Carbon monoxide disproportionates to deposit carbon from a dry synthesis gas mixture (3 vol H₂ + 1 vol CO) over potassium-, sodium- and iron-loaded lignite char and a raw bituminous coal char, high in pyrite, at 1123 K and 0.1 MPa pressure. The carbon is highly reactive, with the injection of 2.7 kPa H₂O to the synthesis gas resulting in net carbon gasification. The effect of traces of sulphur in the gas stream on catalysis of gasification or carbon-forming reactions by calcium, potassium, or sodium is not well understood at present. Traces of sulphur do, however, inhibit catalysis by iron.     

Self-aligned fabrication of single crystal diamond gated field emitter array

This paper describes a self-aligned fabrication process for diamond gated field emitter array (FEA). Utilizing the non-conformal coverage sputtering conditions of silicon oxide, an interesting “sphere on cone” structure is formed on diamond nano tip array, which is the key point of gate hole opening process. This structure causes shadowing at certain regions of side-wall during Ti / Au gate metal deposition. Removal of “sphere” by wet etching leads to the successful fabrication of a single crystalline diamond gated FEA. Scanning electron microscope observations reveal the fabrication of a uniform emitter array with tip radius of curvature (20 nm) and gate hole (1.4 μm). We also confirmed that no noticeable physical damage exists on tip. In field emission characteristics of the fabricated single crystal diamond gated FEA, gate voltage control of field emission current is realized.     

Development of flexible organic light‐emitting diode on barrier film and roll‐to‐roll manufacturing

To come out with a successful organic light‐emitting diode (OLED) lighting business, it is very important to have clear differentiation of OLED from LEDs. Flexible OLED has merits, such as capability to be mounted on the curved wall, which is not easy for LEDs to achieve the feature. There are several approaches to make flexible OLEDs especially among those plastic barrier films that can bring high level of flexibility, which could not be achieved by any conventional lighting method. In this paper, barrier films with various water vapor transmission rate values, including 10^{? 6} order, are applied, and the conditions to have almost no dark spot growth under 85 °C and 85% high temperature/humidity test are shown. Flexible OLED panels are manufactured with the world's first roll‐to‐roll equipment using plastic barrier film.     

Phosphonitrilic chloride: 37. Reaction of 1,1-diamino-3,3,5,5-tetrakis (2,2,2-trifluoroethoxy) cyclotriphosphazene with organosilanes

The Spiro compound N₃P₃(OCH₂CF₃)₄(NH)₂Si(CH₃)₂ formed by reaction of 1,1-diamino-3,3,5,5-tetrakis(2,2,2-trifluoroethoxy)cyclotriphosphazene N₃P₃(OCH₂CF₃)₄(NH₂)₂ and dimethyldichlorosilane Cl₂Si(CH₃)₂ is a yellow or orange coloured oil soluble in organic solvents, vapourized at 160°C without decomposition, and not hydrolysed appreciably in boiling water. Linear compounds are formed by reaction of N₃P₃(OCH₂CF₃)₄(NH₂)₂ with diphenyldichlorosilane or phenyltrichlorosilane owing to hindrance of the phenyl radical. These compounds are amorphous or tacky solids, soluble in organic solvents and stable to water.     

Synthesis and properties of poly (organophosphazenes) ionomers [NP(HNC6H5)2−(x+y)(HNC6H4SO3H) x (HNC6H4SO3Li) y ] n

Poly(anilino sulphamicphosphazenes) such as [NP(HNC₆H₅)_2–x (HNC₆H₄SO₃H) _x ] _n for polymer (I) x=0.3 and for polymer (II) x=0.8 were prepared by the reaction of poly(anilinophosphazene) [NP(HNC₆H₅)₂] _n and sulphonic chloride HSO₃Cl in tetrachloroethane solvent several timeS. Also, H protons in the polymer (I) and (II) were prepared from lithum hydroxide in aqueous solution. It was found, by chemical analysis, that the product prepared with (I) and (II) had compositions such as [NP(HNC₆H₅)_1.7 (HNC₆H₄SO₃H)_0.1(HNC₆H₄SO₃Li)_0.2] _n (III) and [NP(HNC₆H₅)_1.2(HN-C₆H₄SO₃Li)_0.8] _n (IV). Also, the resistivity of products (III) and (IV) were determined and found to be 3.3×10⁷ and 1.5×10⁷ cm^–1, respectively.     

Nanocrystallization of Pd74Si18Au8 metallic glass

The crystallization process of Pd₇₄Si₁₈Au₈ amorphous alloy has been investigated by transmission electron microscopy, small angle X-ray scattering and three-dimensional atom probe techniques. Although literature suggests that the alloy decomposes into two glassy phases prior to the crystallization, we found that the crystallization occurs directly from a single amorphous phase by the primary crystallization of fcc Pd–Au solid solution, followed by the polymorphous crystallization of the remaining amorphous phase to a Pd₃Si phase.