Pressure anomaly in the paramagnetic region of bcc solid3He

The isochoric pressure of bcc Solid³He in the vicinity of the triple point has been measured by changing the temperature stepwisely and waiting for thermal equilibrium. We observed anomalous pressure kinks of the temperature dependence in the paramagnetic region near the triple point. This anomaly appeared at 0.37 to 0.40 tesla, and disappeared below 0.36 tesla. Moreover, critical phenomena at the transition point from the paramagnetic phase (PP) to the high field phase was observed and the phase line curves toward the PP side.     

Effect of Forming Pressure on the Internal Structure of Alumina Green Bodies Examined with Immersion Liquid Technique

Green bodies prepared by compaction of alumina granules were made transparent by an immersion liquid technique, and the internal structure was characterized with an optical microscope to study the effect of forming pressure on the internal structure. Clear images obtained by the technique provide more detailed information than other existing methods for structures ranging from one to tens of micrometers. Intergranular pores were present between unfractured granules. Their sizes and concentration tended to decrease with increasing forming pressure. However, pores were clearly present even in the green body prepared at 600 MPa. A rod- and needlelike feature was also found and was concluded to correspond to a high-density region. The significance of large pores and high-density regions on processing as well as the details of the technique is discussed.     

GABA and glutamate levels in the substantia nigra reticulata following repetitive cerebral ischemia in gerbils

Repetitive cerebral ischemia produces more severe damage than a similar single duration insult. We have previously shown that, in gerbils, damage in the substantia nigra reticulata (SNr) is seen with repetitive insults rather than a single insult. We have also shown that there is a progressive decrease in the extracellular GABA in the striatum in the days preceding such damage, speculating that a loss of GABA may be in part responsible for this damage. This study evaluates the GABA levels in the SNr in animals exposed to repetitive ischemic insults. Each animal received a total of three ischemic insults of 3-min duration at hourly intervals. In vivo microdialysis was carried out to analyze the GABA and glutamate dialysate levels on Days 1, 3, 5, 7, and 14 following the ischemic insult. In the control and treated (ischemic) animals, there was a significant increase in the GABA levels with the introduction of nipecotic acid on Days 1, 3, 5, and 14. However, on Day 7 there was a significant attenuation in the GABA response to nipecotic acid in the treated animals in comparison to the controls. The glutamate levels in the treated animals were similar to the control animals on Days 1, 3, 5, and 7. However, on Day 14 the glutamate levels were significantly lower than on previous days. Our experiments for the first time measure extracellular glutamate and GABA responses in the SNr in animals exposed to repetitive ischemic insults. Our experiments show that there is a significant decrease in the GABA concentrations at a time when ischemic damage is developing in this region. This confirms our hypothesis that a decrease in GABA may be one factor contributing to neuronal damage during the period following repetitive ischemic insults. Further, the rebound increase in GABA levels on Day 14 with a concomitant fall in glutamate levels would indicate that reparative processes are still active in the 2 weeks following the insult.     

Dependence of thin film transistor characteristics on thedeposition conditions of silicon nitride and amorphous silicon

The systematic relation between thin film transistors' (TFT's) characteristics and the deposition conditions of amorphous silicon nitride (a-SiN) films and hydrogenated amorphous silicon (a-Si:H) films is investigated. It is observed that field effect mobility μ_FE and threshold voltage V_th of the TFT's strongly depend on the deposition conditions of these films. The maximum μ_FE of 0.88 cm²/V·s is obtained for the TFT of which a-SiN film is deposited at a pressure of 85 Pa. This phenomenon is due to the variation of the interface states density between a-Si:H film and a-SiN film     

High-performance polymer alloys of polybenzoxazine and bismaleimide

Two series of high-performance polymer alloys were prepared by mixing typical benzoxine monomers, 3-phenyl-3,4-dihydro-2H-1,3-benzoxazine (P-a) or 6,6-(1-methylethyliden)-bis-(3,4-dihydro-3-phenyl-2H-1,3-benzoxazine) (B-a), with a typical bismaleimide, 4,4-bismaleimidodiphenyl methane by various ratios followed by thermal treatment up to 240 °C. DSC and IR of the alloys were examined to follow the curing reaction. These analyses showed that the obtained polymer alloys are AB co-cross-linked polymer networks through the formation of ether linkage between the hydroxyl group of polybenoxazine and the double bond of bismaleimide. Viscoelastic analysis and softening temperature measurement revealed that the polymer alloys have much higher glass transition temperatures than those of each homopolymer. The thermal stability also increased with the increase of bismaleimide content as evidenced by TGA.     

Low-cycle fatigue behavior of Sn-Ag, Sn-Ag-Cu, and Sn-Ag-Cu-Bi lead-free solders

Low-cycle fatigue (LCF) tests on as-cast Sn-3.5Ag, Sn-3Ag-0.5Cu, Sn-3Ag-0.5Cu-1Bi, and Sn-3Ag-0.5Cu-3Bi solders was carried out using a noncontact strain-controlled system at 20°C with a constant frequency of 0.1 Hz. The addition of Cu does not significantly affect the fatigue life of eutectic Sn-Ag solder. However, the fatigue life was significantly reduced with the addition of Bi. The LCF behavior of all solders followed the Coffin-Manson relationship. The fatigue life of the present solders is dominated by the fracture ductility and can be described by the ductility-modified Coffin-Manson’s relationship. Steps at the boundaries of dendrite phases were the initiation sites for microcracks for Sn-3.5Ag, Sn-3Ag-0.5Cu, and Sn-3Ag-0.5Cu-1Bi solders, while for Sn-3Ag-0.5Cu-3Bi solder, cracks initiated along both the dendrite boundaries and subgrain boundaries in the dendrite phases. The linking of these cracks and the propagation of cracks inside the specimen occurred both transgranularly through eutectic phases and intergranularly along dendrite boundaries or subgrain boundaries.     

Stromal CCL5 Promotes Breast Cancer Progression by Interacting with CCR3 in Tumor Cells

Chemokines secreted from stromal cells have important roles for interactions with carcinoma cells and regulating tumor progression. C-C motif chemokine ligand (CCL) 5 is expressed in various types of stromal cells and associated with tumor progression, interacting with C-C chemokine receptor (CCR) 1, 3 and 5 expressed in tumor cells. However, the expression on CCL5 and its receptors have so far not been well-examined in human breast carcinoma tissues. We therefore immunolocalized CCL5, as well as CCR1, 3 and 5, in 111 human breast carcinoma tissues and correlated them with clinicopathological characteristics. Stromal CCL5 immunoreactivity was significantly correlated with the aggressive phenotype of breast carcinomas. Importantly, this tendency was observed especially in the CCR3-positive group. Furthermore, the risk of recurrence was significantly higher in the patients with breast carcinomas positive for CCL5 and CCR3 but negative for CCR1 and CCR5, as compared with other patients. In summary, the CCL5-CCR3 axis might contribute to a worse prognosis in breast cancer patients, and these findings will contribute to a better understanding of the significance of the CCL5/CCRs axis in breast carcinoma microenvironment.     

Direct Observation of Internal Structure in Spray-Dried Alumina Granules

The internal structure of spray-dried alumina granules was characterized by optical microscopy by immersing them in a liquid having a refractive index close to that of alumina. This method provides a unique technique for the detailed analysis of the internal structure of spray-dried granules.     

Development of an anisotropic conductive adhesive film (ACAF) from epoxy resins

A thermoset type anisotropic conductive adhesive film (ACAF), which electrically connects an ITO glass and a flex circuit both having conducting pattersn of less than 100 μm in pitch, has been developed. In this development, bisphenol A and bisphenol F epoxy resins were tested to formulate an ACAF with easy-to-handle tackiness, flexibility, and strenght. A curing agent that gives fast cure and long shelf-life properties to the epoxy resin was also selected. The tensile stress–strain responses of obtained adhesive films were successfully used for determining the formulation. Good aftercure physical properties (electrical and mechanical) were obtained. Durability against high temperature and high humidity were also tested to confirm long-term stability of the conduction of this ACAF. © 1995 John Wiley & Sons, Inc.