Adhesion of streptococci to saliva-coated and uncoated composite-based resins

This study was designed to evaluate the bacterial adhesion to five types of experimental composite-based resins and a commercial composite resin used as a control. Physicochemical surface characteristics of composite resins with and without an artificial saliva coating were measured. The relationship between the numbers of adhering cells (Streptococcus sanguis, S. mutans and S. sobrinus) and surface characteristics was analysed. The values of contact angles and the number of adhering cells were small with saliva coating. S. sanguis ATCC 10557 showed a positive correlation (r=0.835, p<0.05) with the contact angles of uncoated resins, whereas no relationship was observed for saliva-coated resins. With S. mutans Ingbritt the cell numbers adhering to resins correlated strongly (p<0.01) with the values of zeta potential of resins for either saliva coated or uncoated. Electrical repulsion forces had a strong contribution to adherence of cells such as S. mutans and S. sobrinus which show a high absolute zeta potential.     

Trap Levels in Eu-Doped SrAl2O4 Phosphor Crystals Co-Doped with Rare-Earth Elements

SrAl₂O₄:Eu²⁺ phosphor crystals co-doped with auxiliary activators such as La, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, or Y have been grown by the floating zone (FZ) technique. Photoluminescence spectrum (PL), time-resolved PL, and thermally stimulated luminescence (TSL) are evaluated to clarify the long-duration phosphorescence mechanism of SrAl₂O₄, Eu, and Ln phosphors. TSL spectra were measured in the temperature range from RT to 600 K to evaluate the depth and densities of the traps generated by the doping of auxiliary activators that are responsible for the long-duration phosphorescence. The peak wavelength of PL does not vary with auxiliary activator elements, while decay curves vary greatly with the auxiliary activators. The trap depth and the densities of the trapped carriers estimated based on the hole trap model also vary with the auxiliary activator elements. The traps generated at around E =0.5 eV by the auxiliary activators, Nd, Dy, and Tm, with sufficient densities are effective for the long-duration phosphorescence.     

Carbon fiber from natural biopolymer Bombyx mori silk fibroin with iodine treatment

Carbon fibers were prepared from silk fibers after an iodine treatment and the carbon yield, fiber morphology, structure and mechanical properties were investigated. A single or multi-step carbonization process was used for the preparation. In the single step process, silk fibroin (SF) fibers were heated from 25 to 800 °C with a heating rate of 5 °C min⁻¹ under Ar atmosphere. However, the carbon fiber obtained was partially melted and was too fragile to handle. For better performance, SF fibers were treated with iodine vapor at 100 °C for 12 h and untreated and iodinated SF fibers were heated from 25 to 800 °C by a multi-step carbonization process, which was defined based on the optimum thermal degradation rate of silk. In this multi-step process, the carbon fibers obtained from iodinated SF were structurally intact and stable in appearance, and the carbon yield achieved was ca. 36 wt.%, much higher than the value for untreated SF. X-ray diffraction, Raman spectroscopy and transmission electron microscopic observation revealed that the obtained carbon fibers from both untreated and iodinated SFs had a basically amorphous structure. The strength of carbon fibers prepared from iodinated SF using the multi-step carbonization was considerably increased compared to that of untreated SF. According to viscoelastic measurement, by heating above 280 °C the iodine introduced intermolecular cross-linking of the SF, and its melt flow was inhibited which produced a higher yield and better performance of the carbon fiber.     

Separation of surfactant mixtures and their homologs by high performance liquid chromatography

A technique for separating similar and diverse ionogenic mixtures into their individual homologs was studied by high performance liquid chromatography on an octadecyl-silica (TSK Gel LS-410) column. Conditions used for the separation were: column size, 6 mm id×200 mm; mobile phase, water/methanol (15:85, v/v) containing (a) 1.0 M sodium perchlorate and adjsting to pH 2.5 with phosphoric acid, (b) 0.1 M and pH 3.5; column temp., 50 C. By using 2 mobile phase conditions, various surfactant mixtures were separated into their individual homologs and simultaneously distinguished from each other, regardless of their ionogenic properties.     

Antitermitic activity of extracts from Chamaecyparis obtusa branch heartwood

The antitermitic activity of extracts from the branch heartwood of Chamaecyparis obtusa (hinoki) against Japanese termites (Reticulitermes speratus) was compared with that of the trunk. Samples of branch and trunk heartwood were extracted with n-hexane, ethyl acetate, and methanol successively. n-Hexane extracts of branch and trunk heartwood were strongly antitermitic, and branch heartwood contained greater quantities of active n-hexane extracts than trunk heartwood. Germacra-1-(10), 5-dien-4β-ol, t-cadinol, α-cadinol, hinokiresinol, and hinokinin were separated from the branch extracts and the termiticidal and antifeedant activity of these compounds was tested by no-choice and dual-choice test methods. The sesquiterpenoids, germacra-1-(10), 5-dien-4β-ol, t-cadinol and α-cadinol were strongly termiticidal. The norlignan hinokiresinol and lignan hinokinin had weak termiticidal, and strong antifeedant and repellent activity. High concentrations of germacra-1-(10), 5-dien-4β-ol and hinokiresinol were present in branch heartwood. These compounds protect hinoki branches from termites and other harmful organisms. Hinoki branch heartwood, which is usually unused, is a potential source of active antitermitic compounds.     

Characterization of alternative plasticizers in poly(vinyl chloride) sheets for blood containers

This study aimed to optimize the ratio of dioctyl 4‐cyclohexene‐1,2‐dicarboxylate (DOTH) and di‐isononyl‐cyclohexane‐1,2‐dicarboxylate (DINCH^®) for use as plasticizers in poly(vinyl chloride) (PVC) sheets. We also evaluated the biological safety of DOTH for its potential to be part of a safe PVC‐based blood container. The suppression of hemolysis in mannitol‐adenine‐phosphate / red cell concentrates (MAP/RCC) with DOTH/(DINCH^®‐PVC) sheets and the elution of plasticizers from the sheets increased with higher DOTH compositions. The properties of the PVC sheet containing DOTH and DINCH^® in the ratio of 25:33 parts against PVC 100 parts as a weight were almost identical to the PVC sheet made of di(2‐ethylhexyl) phthalate. From a subchronic toxicity test, DOTH did not show any adverse effects on all organs, including the testes, epididymis, liver, and kidneys. The no‐observed‐adverse‐effect level was 300 mg/kg body weight/day in a rat. These results suggest that DOTH/DINCH^® (25:33) is a promising candidate for the replacement of di(2‐ethylhexyl) phthalate in blood containers. J. VINYL ADDIT. TECHNOL., 22:520–528, 2016. © 2015 Society of Plastics Engineers     

Partially biobased polyamphiphile-bearing reactive epoxy groups in the side chains and its application to the hydrogel

Partially biobased polyamphiphile-bearing reactive epoxy groups in the side chains were obtained in 62–78 % yields by a radical copolymerization of limonene oxide (LO) and PEG methylacrylate (PEGA) with different feed ratios. Degree of LO incorporation into the copolymer was determined as 12–23 % by ¹H NMR spectroscopic analysis. The copolymer having LO unit:PEGA unit = 19:81 formed polymer associates in water, particle diameter of which was ranged mainly from 4 to 66 nm and hydrodynamic mean diameter was 12.3 nm. Its critical micelle concentration was determined as 0.53 g/L by fluorescence spectroscopic analysis. A cross-linking reaction of the epoxy groups in the side chains was conducted with 3.97 mol% (to the epoxy group) of branched poly(ethylene imine) as a cross-linker to give the corresponding hydrogel in 56 % yield. The hydrogel can absorb water as much as 13 times its own mass.     

Characterization of petroleum-degrading bacteria from oil-contaminated sites in Vietnam

Four petroleum-degrading bacterial strains, 2TN-NB, 6TBX-CL, MVK2-5, and XCK, were isolated from various oil-contaminated sites in Vietnam. Determination of the nucleotide sequence of the gene encoding 16S rRNA allowed 2TN-NB to be identified as Acinetobacter sp. and the other three stains as Pseudomonas sp. Among the four isolates, 2TN-NB was most effective in degrading crude oil: in 1 d, it degraded 95% of the crude oil in the culture medium (5%, v/v). The isolated strains could also degrade a sulfur-containing aromatic hydrocarbon, dibenzothiophene (DBT), with low efficiency. Except for MVK2-5, which degraded crude oil least efficiently, the isolates produced biosurfactants in amounts sufficient for structural analysis. FT-IR measurement suggested that strains 6TBX-CL and XCK produced glycolipid-type biosurfactants while that produced by 2TN-NB was of the polysaccharide type.